|
| 1 | Dismantling Plain or corrugated steel sheeting/ textile coverings, any gauge, thickness, including Nainital or similar pattern roof coverings (Corrugated, semi corrugated, etc) sheets in roof coverings incl ridges |
| 2 | M & L pre painted glavalume alumium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 3 | Dismantling wrought iron or mild steel work, barbed wire of any description not other wise provided for including stacking, loading etc all as specified and directed. |
| 4 | Supply and fix post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh or etc) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 and E-165 all as speicified and directed. |
| 5 | M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe-410, GdeE-250, quality A all as specified and directed |
| 6 | Dismantling wall hearth tiling including cement mortar bedding (but not backing) and removing unserviceable material as directed. |
| 7 | M & L for white/coloured Non skid coloured tiles superior finish grade B-1 quality 7 to 8 mm thick(square/ rectangular) area of each tiles exceeding 0.38 sqm in floor (1200/1400 X 600/800mm) with rectified edges ( joint free) etc set and jointed in neat cement slury over cement screed 15 mm thick 1:6.Note : Rates Including Epoxy based tile Grout/ joint filler to fill the gaps between tiles with necessary spacers of specified colour shade to match. |
| 8 | M & L for white glazed/ cladding ceramic tiles of any finish and pattern Gde B-II (b) quality of size 600/450 x 300 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing with cm 1:4. |
| 9 | M & L for Machine cut kota stone slab/ sadarhalli stone flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete set and jointed in neat cement slury over cement screed 15 mm thick 1:6. all as specified and directed. |
| 10 | M & L for Machine cut kota stone slab/ sadarhalli stone 20-25mm thick in riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing coat with cm 1:4 all as specified and directed. |
| 11 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 12 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position (Size as specified) to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. all as specified and directed |
| 13 | M&L for 100mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in floor/hard-standing/path/Plinth protection finished even and smooth without using extra cement complete. |
| 14 | M&L Cement concrete 70 mm thick, 1:2:4 , type B1, using 20 mm graded stone aggregate for subbases, floors & pavings and plinth protection. |
| 15 | M & L for chequered cement concrete tiles 20cmx20cm/30cmx30cm/ Heavy duty parking tiles ( with grey pigments cement & colour pigments) of thickness up to 25mm in floor of rectified edges ( joint free) etc set and jointed in neat cement slury over cement screed 15 mm thick 1:6. directed by Engr-in-charge |
| 16 | Demolition of brickwork or stone/boulder masonary, build in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but all as specified |
| 17 | M & L for pre cast cement concrete block masonry type C1 1:3:6 (20 mm graded agrregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified |
| 18 | M & L 15 mm thick rendering CM 1:4 on other than fair faces of brick work or concrete surfaces etc finished even and smooth without using extra cement |
| 19 | Material & Labour for applying Two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on new plastered surfaces of walls complete as mentioned in SSR all as specified and as directed . |
| 20 | M & L for painting new surfaces of steel and iron work of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide (Zinc chrome) primer |
| 21 | M & L Preparation of old steel Surfaces of any description, over 10cm in width or girth,not otherwise described over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint). |
| 22 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded in any mortor |
| 23 | M & L Machine pressed precast concrete rubber moulded interlocking paver block (With Grey cement and colour pigment) any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade all as specified and directed |
| 24 | M & L Hardcore of gauge 12.5mm chips, deposited, spread and levelled in layers n exc. 15cm thick, watered, compacted and rammed to a true surface |
| 25 | Removing soil/debris/ building materials etc. to a distance 15km and above, beyond the lead included in the rates, including loading, unloading and stacking at the destination away from the MOD defence land. Note: Dumbing of debris and getting permission from local authorities are complete resposiblity of contractor Please Enable Macros to View BoQ information |
