|
| 1 | Excavation in trenches in soft/loose soil for n exe 1.5 mtr in width and not exe 1.5 mtr in depth for foundation etc or for shafts well case pits manhole piers holes etc not exe 10 sqm on plan complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 3 | Removing excavated material (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 4 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 ( type D-2 using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 6 | M&L for PCC 1:3:6 ( type C-2 using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 7 | M&L for Brick work using Sub class B bricks/Fly Ash lime fuel bricks or as specified in PS-II clause , straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 8 | S&F framed mild steel work such as grills, gratings etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work conforming to Fe-290-Gde E-165, complete all as specified and directed. |
| 9 | S&F framed work in brackets of angle or Tee with web and flanges such as grills, gratings etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars bared iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290-Gde E-165, complete all as specified and directed. |
| 10 | S&F Mild steel rag or lewis bolts, 20 mm dia screwed one end, with hexagonal or square nuts and washers, the other end enlareged and jagged or lewised. Not exceeding 15 cm long complete all as specified and directed. |
| 11 | S&F plain, 1.59mm CR steel sheeting, in straight flashings complete all as specified and directed. |
| 12 | S&F plain, galvanised 1.00 mm mild sheeting, in straight flashings with grade of zinc coating 275 um , complete all as specified and directed. |
| 13 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed. |
| 14 | M&L for 75 mm thick cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing compound grade 'A' complete all as specified and directed. |
| 15 | M&L for 40 mm thick cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough as in subfloors or similar locations, complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4) with water proofing compound as manufacturers instructions complete all as specified and directed. |
| 17 | Supply onlly water proofing compound, ISI marked, complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered wall surfaces of any description and applying the two coats of extreior acrylic emulsion over and including a coat of acrylic emulsion primer complete all as specified and directed. |
| 19 | M&L for writing letters or figures ( Block, Roman, Italic or Indian) n exc 30 cm high with synthetic enamel paint complete all as specified and directed. |
| 20 | M&L for Aplying two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description not otherwise described, over 10 cm in width or girth, including prepartion of new surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
