|
| 1 | XLPE INSULATED ARMOURED CABLES (UNDERGROUND): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1metre below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-Overall size 240sq.mm (3½ Core) Armoured (Underground) 34.10 A (xxx) (1158.00 + 70% = 1968.6 + 5.35%= 2073.92) |
| 2 | Overall size 185sq.mm (3½ Core) Armoured (Underground) 34.10 A (xviii) ( 973.00 + 70% = 1654.1 + 5.35%= 1742.59) |
| 3 | XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 240sq.mm (3½ Core) Armoured (Loose) 34.10 B (xxx) ( 863.00 + 95% = 1682.85 + 5.35% = 1772.88) |
| 4 | Supply and erection of heavy duty aluminium thimbles /lugs for cable end termination duly crimped including making necessary connections Completely:- Aluminium thimble cable Core size 240sq.mm 34.38 A (x) (100.00 + 5.35% = 105.35) |
| 5 | Aluminium thimble cable Core size 185sq.mm (ix) ( 62.00 + 5.35% = 65.317) |
| 6 | Aluminium thimble cable Core size 150sq.mm 34.38 A(viii) ( 52.00 + 5.35% = 54.78) |
| 7 | Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaquar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Crompton including erection of the same with connections, testing etc . complete in all respects as approved and desired by the Engineer in-charge at site. (BFUHS/UWD/2019/10622 Dt 27/5/2019) |
| 8 | OVER HEAD DISTRIBUTION ALUMINIUM CABLES, ACSR CONDUCTORS, CLAMPS, JUMPERS & JOINT KITS:Wiring over-head line in PVC insulated & PVC sheathed two single core aluminium conductor cable overall 1100 volts grade binding with G.I. wire 2mm dia. (14 SWG) with brass/ aluminium link clips complete in all respect as approved and desired by the Engineer In-Charge at site. PVC insulated & PVC sheathed aluminium conductor cable Overall Size 10mm² (1/1.40mm) Twin Core 34.34 (i) © ( 45.00 + 50% = 67.5 + 5.35% = 71.11) |
| 9 | XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminiumconductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 tobe laid (On Surface) as per PWD General Specifications:- Overall size 10sq.mm (4Core) Un-armoured (On-Surface) 34.10 C (xxxvi) ( 94 + 90% = 178.6 + 5.35% = 188.15) |
| 10 | Supply and erection of LED flood light 100 watt with high pressure die cast housing lumens 110-120,AC220-240V, 50/60Hz(IP 65 Protected) of Make Havells/Crompton/Phillips. The fitting will be mounting with the help of necessary arrangement for installation on the top parapet of the building including connection , testing & commissioning etc. complete in all respects as per satisfaction and desired by the engineer-incharge at site. |
| 11 | SHEET METAL IRON CLAD SWITCHES: Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in thebody of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:- ICTPN Switch 63amp., 415volts 34.18 (vi) ( 2904.00 + 35%= 3920.4 + 5.35%= 4130.14) |
| 12 | Supply and erection of LED batten 40 Watt LED (including constant LED driver) with High quality extruded aluminum with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3% with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. |
| 13 | DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/103.5mm (Outer/ Inner dia.) 34.37 A (iv) (276.00 + 5.35% =290.76) |
| 14 | MCCB's (FOR PANELS & SHEET ENCLOSURE):Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with Spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- MCCB Four Pole 400amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting 34.23 B (viii) ( 23901.00 + 50%= 35851.5 + 5.35%= 37769) |
| 15 | MS SHEET ENCLOSURE FOR MCCB's:Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made rom 14/16 SWG CRCA sheet, confirmingto IS 8623/1977-82. The door should be ouble folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- MS Sheet Enclosure having provision for MCCB 200-630Amp.with extended rotary handle (Approx. Size 750mm x 300mm x 250mm) 34.23 D (i) b (4218.00 + 40%= 5905.2+ 5.35%= 6221.12) |
| 16 | Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method.Including excavation ,stringing and jointing of pipe upto 160mm complete 27.71 (850.46 + 5.35% = 895.95 ) Please Enable Macros to View BoQ information |
