|
| 1 | Removal of centrifugal pumpset/ jet pumps submersible pumpsets and its accessories from borewell / open well for attending repairs 50% of the rates mentioned under item 17 (a), (B) and © may be allaowed for the respective horse power as per standard specifications. |
| 2 | Conveyance of power pumpset (centrifugual, jet and submersible) and its acessories from site of works to workshop for attending repair works, and then to work site Conveyance upto 10kms as per standard specifications. |
| 3 | Rewinding charges for the following wet type submersible motors using suitable gauge PVC insulated electrolyte copper wire of suitable no. of turns including deduct the cost of scrap of old removing winding coil etc complete (Local Rate) |
| 4 | a) 1.5 to 2 H.P |
| 5 | b) 5 to 7.5 H.P |
| 6 | Supply and Replacing of following worn out parts in the wet type submersible motors with new one including cost of materials and labour. including deduct the old material cost (Local Rate) |
| 7 | a) Stainless steel coupling |
| 8 | b) Stainless steel coupling Key |
| 9 | c) Gun metal sand guard |
| 10 | d) Motor studs. |
| 11 | e) G.M. Thrust bearing. |
| 12 | f) Top and bottom push cover |
| 13 | g) Gun metal push |
| 14 | h) S.S Stainar |
| 15 | i) Impeller corset |
| 16 | j) Top & Bottom housing |
| 17 | k) Center study housing bush |
| 18 | l) Ammeter. |
| 19 | m) Voltmeter. |
| 20 | n) Push button |
| 21 | o) Contactor assembly 2 H.P., to 5 H.P., |
| 22 | p) No volt coil |
| 23 | q) Contactor point set. |
| 24 | r) 50 MFD Running condenser |
| 25 | s) 30 MFD Running condenser |
| 26 | t) 150MFD to 200 MFD starting condenser |
| 27 | u) 200MFD to 250 MFD starting condenser |
| 28 | Supply and delivery of submersible PVC Insulated and sheathed 3 core Flat type copper cable confirming to IS694/1990 as per standard specifications. |
| 29 | a) 2.5sq mm submersible cables |
| 30 | b) 4.00 sq mm submersible cables |
| 31 | Re-erection of submersible pumpsets and its accessories in borewell/after attending repairs 50% of the rates mentioned under item 17 (a), (b) and © of as per standard specifications. |
| 32 | Supply and delivery of submersible PVC Insulated and sheathed 3 core Flat type copper cable confirming to IS694/1990 as per standard specifications. |
| 33 | a) Single Pole 6A to 32A, 10KA Miniature circuit breaker |
| 34 | b) Double Pole 6A to 32A, 10KA Miniature circuit breaker |
| 35 | c) Four Pole 6A to 32A, 10KA Miniature circuit breaker |
| 36 | d) 32 Amps Porcelain Fuse unit (500V) |
| 37 | e) Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64 |
| 38 | f) Supply & run of 2 of 4 sqmm (56/0.3) PVC insulated sc unsheathed cu.cinductor of 1100V on 7/20 Gi bearer wire for service connection mains SD 65 |
| 39 | g) Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 69 |
| 40 | h) Supply & run of 2 of 4 sqmm (56/0.3) PVC insulated sc unsheathed cu.conductor of 1100V grade in 25mm dia GI pipe (class'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70 |
| 41 | Supply and delivery fixing of UPVC pipes and specials etc, complete as per standard specifications |
| 42 | a) 25mm UPVC Pipe |
| 43 | b) Adapter Set Please Enable Macros to View BoQ information |
