|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand;silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam Ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, ,and baling out water wherever ‘necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed etc.,complete |
| 2 | Supplying and filling in foundation and basement with sand filling in layers of not more than 15cm thick well rammed watered and compacted 1m3 etc complete complying with standard specification |
| 3 | Collection supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmetnal gauge for pre-measurement including all labour charges for filling etc complete as per standard specification. |
| 4 | Plain cement concrete 1:4: (one cement four sand, eight aggregate using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and comapcted etc complete complying with standard specification. |
| 5 | Centering for soffits of RCC slabs of plane surface like lintels beams etc including strutting 3m high using mild steel sheets of size 90cmx60cmx and B.G 10 stuffened with M.S angles of size 25mmx25mmx3mm laid over silver oak (C>W) joists of size 10cmx6.5cm spaced at about 90cm c/c and supported by casurina props of 10cms to 13cm dia spaced of 75cm C/C complying with standard specification and directed. |
| 6 | With out strutting |
| 7 | Strutting |
| 8 | Plain Cement Concrete 1:3:6 (one cement three sand, six aggregate)using 20mm gauge hand broken granite stone jolly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc complete complying with standard specification. |
| 9 | Supplying and laying precast designer paver block confirming to IS 1568-2006 specification manufacturing and laying standard of M50grade 63mm thick table clauses 5 and 9.14 suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mmx12.50mmx80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over sand bed of 150mm thick excluding the cost of sand conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc complete IS 15658-2006 |
| 10 | Supplying and fixing of trusses using necessary I section with 'L' angles 25mmx25mmx3mm size and I each according to design approved by the departmental officers including cutting welding cost and conveyance of all materials to site and all labour charges etc complete as per standard specification. |
| 11 | Roofing with G.I Sheet 30Cm wide and 1.6mm thick including all cost and conveyance of all materials and all labour charges etc., Complete. |
| 12 | Plastering with cement mortar 1:3 mix (One cement and three sand) to 10mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification |
| 13 | Supply and fabrication and placing in position of TMT steel rods to required size and length as directed by the departmental officers ‘including cost of binding wire, cutting, bending and tying with proper position etc., including cost and conveyance of all materials to site and all labour charges’ etc., complete Complying with Standard Specification as per TNDSS No.97 V,VI (S6) VII (S6) VII-3, |
| 14 | Reinforced Cement Concrete 1:112:3 Mix (One part cement, one and half part sand and three part of coarse aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc..,Complete Complying with Standard Specifications as per TNDSS No.30 V,VI (S3) VII-3 |
| 15 | Providing Rain water Harvesting pits to Length of 0.60M, Width of 0.60M and depth of 0.90m the pit shall be filled by layers of 40mm HBG metal, and River sand to 450mm with each layer.The rate shall inclusive of all materials, labour charges etc,complete as per standard Specification . Please Enable Macros to View BoQ information |
