|
| 1 | Cleaning the Juncle using Mechanical JCB as per the Direction of the Departmental officers Etc., Complete |
| 2 | Providing and laying well gravel including cost and conveyance of all materials from approved quarries as noted in lead chart to the road site including loading, unloading and stacking the well gravel at road site to departmental gauge for pre-measurement including labour charges for laying spreading leveling to camper etc., complete as per specifications., |
| 3 | Providing Pile foundation of size 300 mm dia using augur including labour charges and all other tools and plants charges etc. , as per direction of dept officers (Local Rate) |
| 4 | Earth work excavation to all soils with initial lead and lift etc. complete |
| 5 | Cement concrete 1:4:8 mix using 40mm size HBG metal from approved quarry etc. complete |
| 6 | Centering with steel plates for sides & soffits etc. complete For Plinth Beam |
| 7 | Reinforced Cement concrete 1:1.5 :3 (one cement, one & half M.sand and three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 8 | Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges for cutting, bending & tying etc., complying with standard specifications - 1 Quintal |
| 9 | Plain cement concrete 1:2:4 mix (One cement two M.Sand and four aggregate) using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - 1 m3 (detailed data for 10 m3 ) |
| 10 | Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4\\" x 41/4\\" x 23/4\\") including cost of materials and labour charges etc., as per standard specification - 1m |
| 11 | Precast Solid Blocks Masonry in CM 1:4 ( One Cement & Four Sand) Using walls of size 400mm x 200mm x 200mm including finishing, curing etc., complete complying with standard specification - 100 CFT |
| 12 | Plastering in Cement mortar 1:5 mix to 12mm thick etc. complete. |
| 13 | Providing Putty work over Compound Wall using 1 st Class POP putty of approved Quality as per the Direction of the Departmental officers etc., Complete. |
| 14 | Supply and fixing of M.S.gate and Grills including one coat of red oxide paint etc. complete |
| 15 | Supply and fixing of Stainless steel Handrail including all labours and transports charges as per direction of departmental officers., |
| 16 | Painting with plastic emulsion paint in two coats over a base coat of approved colour and quality etc., complete |
| 17 | Painting with enamel paint in two coats of approved colour and quality over new iron work etc. complete |
| 18 | Filling with Quary Rubbish in Layer by Layer including Watering and Consolidation and all labour charges for Spreading as per the Direction of the Departmental officers Etc, Complete |
| 19 | Providing and laying of Rubber Moulded Hydraulic Pressed Paver Block size 83mm thick to be laid in lorrying bone pattern with approved non sticking surface in the top and the rate including leveling the base, preparation of sub base with sand cushion 100mm thick, laying out the pavement, cut the pieces to fit the edge, vibrating the pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specification. |
| 20 | Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 21 | Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. (Sl.No.360f) |
| 22 | Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification. |
| 23 | Manufacturing supplying and fixing of MILD STEEL Window made out of 40 x 40 x 6 mm M.S angle for outer frame, 35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets ( 18 G ) with 5Nos,of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. |
| 24 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 25 | Supply and fixing of park benches using M.S.Pipe plates as per the direction of Dept. Off., etc. complete |
| 26 | Supply and fixing of park model play Equipements using M.S.Pipe plates and sheet as per the direction of Dept. Off., etc. complete |
| 27 | 1.Dust pin |
| 28 | Supply and fixing of 65mm dia GI pipe(Class'B') 4metre length with 300mmx300mmx6mm MS base plate duly welded at the bottom with concreting and construction of masonary pedestal with MS box of 30cmx20cmx10cm with angle iron frame work with door and lock and key arrangements with supply and fixing of 60W LED street light fitting with bulb and with supply and fixing of 1No. 16A fuse unit (500V) and 5A SP switch inside the MS box with PVC unsheathed FRLS leads and painting of suitable colour |
| 29 | Supply and Laying of 4x10 Sq. mm PVC armoured LTUG cable in a Trunch to be Excavated at a Depth of 0.75 m Putting 0.15m Layer of Sand covering the Cable completely with bricks and Sand and Refilling the Earth to make Good SD 196 |
| 30 | Supplying and fixing of HDPE Water Tank with suitable specials including cost of materials to site and all other labour charges.etc |
| 31 | Supplying and Fixing of Indian make WHITE WATER CLOSET of size 580mm x 440mm with 'P' Trap and foot rest and Filling allround the closet using 20mm broken brick jelly including fixing in position and levelling etc., complete |
| 32 | Supply and Fixing of Lipped Mouth Porcelin Flat Back Urinal Tub with all accessories such as 32mm dia Bell Mouth PVC Connection , 15mm dia GM wheel Valve,15mm dia 'B' Class GI Waste Water Pipe 15mm dia nylon connection, 15mm dia Brass nipple Etc., complete (White) |
| 33 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed copper cable of 1100 V grade with suitable rigid pipe on walls & ceiling for concealed light / fan point |
| 34 | Supply and run of 4 x6 sq.mm. PVC Insulated copper cable (7/20) run of mains for service connection. Etc. complete. |
| 35 | Supply and fixing of 45W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting . |
| 36 | Provision for Geologist from the TamilNadu Agricultural University for inspecting the site and for making the borewll point . |
| 37 | Drilling of Borewell 180mm dia vertical bores depth as directed by the departmental officers including labour charges for inserting casing pipe assembling in the drilling holes including welding, jointing, grouting, the casing pipe etc,. |
| 38 | Supply of 180mm dia OD PVC casing pipe 6 kg/cm2 Suitable wall thickness including erection and welding including the cast of coupling etc complete |
| 39 | Drilling of Borewell 150mm dia vertical bores depth as directed by the departmental officers including labour charges for inserting casing pipe assembling in the drilling holes including welding, jointing, grouting, the casing pipe etc,. |
| 40 | Supply and delivery of 7.5HP borewell submersible pumpset with vertical type with D.O.L Panel Board and all accessories with latest FS8034 in general for the following duty conditions the pumpset should have diagonally balanced bronze impler and stainless shaft for motor and pump and directly coupled to a suitable capacity continuous rated three phase fifty cycles 22/440 volts AC supply motor should be as per ISI with upto date amendment. The starter winding should be made from high conductivity PVC insulated 3 core flat copper cable of suitable size of work |
| 41 | Supply and fixing of 7.5HP panel board as per standard specifications etc complete., |
| 42 | 51.Supply of 4 mm2 3 core Copper, PVC insulated flat cable. |
| 43 | Labour for the erection of submersible pumpsets in borewell including fixing and jointing submersible cable with proper claps upto the starter to the required depth values erection clamps, pressure gauges upto exterior wall of the pump room and erection of panel board consisting of TPICN, Switches Starter, Voltmeter, Ammeter, 3 pilot (Including lamps) capacitor, single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules including construction of earth pits with earthing materials as per rules etc. complete testing pumpsets on trial run 30 days and as directed by corporation officers |
| 44 | EARTHWORK EXCAVATION for PIPE LINE in all soils and to full depth as my be directed and refilling the sides of standard specifications. |
| 45 | Supply and delivery of the following materials approved brand as per list with ISI marking and an approved by corporation officers. |
| 46 | a. 50 mm GI pipe |
| 47 | b. 50 mm GI Bore Coupling |
| 48 | c. 50 mm GI Coupling |
| 49 | d. 50 mm GI Bend |
| 50 | e. 50mm GI Elbow |
| 51 | f. 50mm NRV Valve |
| 52 | g. 50 x 150 mm GI Barrel Nipple |
| 53 | h. 50 x 450 mm GI Barrel Nipple |
| 54 | i. 50 x 600mm GI Barrel Nipple |
| 55 | j. 50 mm dia GM gate valve |
| 56 | k. 80 mm dia GM gate valve |
| 57 | k. 50 mm dia MS Bore clamp |
| 58 | l. MS borewell cover |
| 59 | m. 50 mm dia Hex Nipple |
| 60 | n. 50mm dia Flange set |
| 61 | o. Supply of Shellock bottle |
| 62 | Supply of PVC pipes and specials |
| 63 | a. 63mm dia PVC pipe of 6 kg/cm2 |
| 64 | b. 63 mm dia PVC Elbow |
| 65 | c. 63 mm dia PVC Tee |
| 66 | d. 63 mm dia PVC Coupling |
| 67 | e. 63x20 mm dia PVC saddle |
| 68 | f. 63 mm dia PVC Endcap |
| 69 | g. 63 mm dia PVC FTA |
| 70 | h. 20mm CI Tap |
| 71 | i. 25mm upvc pipe |
| 72 | j. 110mm pvc pipe |
| 73 | k. 90mm pvc pipe |
| 74 | l. 25mm brass valve |
| 75 | Supply of 7 x 20 Copper Wire |
| 76 | Arial Board for EB |
| 77 | EB Service pipe set (32 mm dia GI B Class 3 mtrs length) |
| 78 | 32mm GI A Class pipe 1 Mtr length for Earthing |
| 79 | Laying and joining of PVC pipe for Distribution line Please Enable Macros to View BoQ information |
