Tender For Nit No: Secl/Sgp/E&M/E-Tender/2026-27/387 Diversion Of Existing 33Kv Hardi Feeder Line Of Mppkvvcl Crossing The Surface Of Damini Ug Mine To The Mine Boundary To Facilitate Safe Depillaring Operations By Lhcm And To Avoid Sterilization Of, Shahdol-Madhya Pradesh

TDR : 55866924

Tender Notice
BOQ

10 Days Left

Shahdol , Madhya Pradesh

Tender Brief : Tender For Nit No: Secl/Sgp/E&M/E-Tender/2026-27/387 Diversion Of Existing 33Kv Hardi Feeder Line Of Mppkvvcl Crossing The Surface Of Damini Ug Mine To The Mine Boundary To Facilitate Safe Depillaring Operations By Lhcm And To Avoid Sterilization Of

Document Fees
Refer document

EMD
₹ 57900.0 /-

Tender Value
₹ 46.28 Lakhs /-

Submission Date
19-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Diversion of existing 33KV Hardi Feeder line of MPPKVVCL crossing the surface of Damini UG mine to the mine boundary to facilitate safe depillaring operations by LHCM and to avoid sterilization of coal reserves at Damini UG mine of Sohagpur area, SECL
2	H- BEAM 15 METER 152 X 152 MM 37.1 KG/METER
3	33 KV AB SWITCH 600 AMP TPGANG OPERATED
4	H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
5	33 KV 'V' CROSS ARM 1.5 MTR (5FT)- CENTRE MADE FROM 75X75X6MM ANGLE
6	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
7	33 KV TOP CLAMPS 75X75X6MM ANGLE TYPE
8	33 KV SINGLE POLE CUT POINT 100X50X6 MM CHANNEL
9	33 KV SIDE CROSS ARM (100X50X6MM MS CHANNEL)
10	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
11	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
12	ACSR DOG CONDUCTOR 0.10 SQ. INCH (100 SQ.MM. AL.EQ.), (6/4.72 + 7/1.57 MM)
13	JOINTING SLEEVES (ALUMINIUM) FOR DOG CONDUCTOR
14	STAY SET 20 MM COMPLETE
15	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
16	H.BEAM CLAMPS 65X8MM FLAT
17	STAY INSULATOR 90X65MM
18	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/47 & 48
19	CONCRETING OF H-BEAM/ RAIL POLE @ 0.94 CMT. PER POLE (INCLUDING MUFFING)
20	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
21	RED-OXIDE PAINT
22	ALUMINUM PAINT
23	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
24	DANGER BOARD ENAMELED 33 KV
25	ALUMINIUM BINDING WIRE AND TAPE
26	M S BOLT WITH NUT 16X200 MM
27	H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
28	DC.CROSS ARMS 5` (1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL
29	H.BEAM CLAMPS 65X8MM FLAT
30	33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
31	33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
32	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
33	BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM
34	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
35	STAY SET 20 MM COMPLETE
36	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
37	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/ 47 & 48
38	CONCRETING OF H-BEAM/ RAIL POLE @ 0.94 CMT. PER POLE (INCLUDING MUFFING)
39	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
40	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
41	RED-OXIDE PAINT
42	ALUMINUM PAINT
43	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
44	DANGER BOARD ENAMELED 33 KV
45	M S BOLT WITH NUT 16X200 MM
46	MS STRAIN PLATE 65X8 MM, 250 MM LONG
47	H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
48	DC.CROSS ARMS 5` (1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL
49	H.BEAM CLAMPS 65X8MM FLAT
50	33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
51	33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
52	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
53	BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM
54	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
55	STAY SET 20 MM COMPLETE
56	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
57	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/47 & 48
58	CONCRETING (1:3:6) OF H-BEAM @ 0.70 CMT.PER POLE INCLUDING MUFFING
59	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
60	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
61	RED-OXIDE PAINT
62	ALUMINUM PAINT
63	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
64	DANGER BOARD ENAMELED 33 KV
65	M S BOLT WITH NUT 16X200 MM
66	MS STRAIN PLATE 65X8 MM, 250 MM LONG
67	H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
68	DC.CROSS ARMS 5` (1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL
69	H.BEAM CLAMPS 65X8MM FLAT
70	33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
71	33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
72	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
73	BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM
74	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
75	STAY SET 20 MM COMPLETE
76	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
77	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/47 & 48
78	CONCRETING (1:3:6) OF H-BEAM @ 0.70 CMT.PER POLE INCLUDING MUFFING
79	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
80	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
81	RED-OXIDE PAINT
82	ALUMINUM PAINT
83	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
84	DANGER BOARD ENAMELED 33 KV
85	M S BOLT WITH NUT 16X200 MM
86	MS STRAIN PLATE 65X8 MM, 250 MM LONG
87	33 KV SINGLE POLE CUT POINT 100X50X6 MM CHANNEL
88	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
89	33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
90	33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
91	MS STRAIN PLATE 65X8 MM, 250 MM LONG
92	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
93	STAY SET 20 MM COMPLETE
94	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
95	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
96	H.BEAM CLAMPS 65X8MM FLAT
97	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/47 & 48
98	CONCRETING OF H-BEAM @1.25 CMT PER POLE (INCLUDING MUFFING)
99	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
100	RED-OXIDE PAINT
101	ALUMINUM PAINT
102	M S BOLT WITH NUT 16X200 MM
103	DANGER BOARD ENAMELED 33 KV
104	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
105	CONDUCTOR ACSR SCRAP (RETURNABLE ITEM)
106	MISC IRON SCRAP (RETURNABLE ITEM)
107	Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Madhya Pradesh Tenders

Electrical Industry Tenders

Electrical Boxes Tenders

Feeder Pillar Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Nit No: Secl/Sgp/E&M/E-Tender/2026-27/387 Diversion Of Existing 33Kv Hardi Feeder Line Of Mppkvvcl Crossing The Surface Of Damini Ug Mine To The Mine Boundary To Facilitate Safe Depillaring Operations By Lhcm And To Avoid Sterilization Of, Shahdol-Madhya Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Diversion of existing 33KV Hardi Feeder line of MPPKVVCL crossing the surface of Damini UG mine to the mine boundary to facilitate safe depillaring operations by LHCM and to avoid sterilization of coal reserves at Damini UG mine of Sohagpur area, SECL
2	H- BEAM 15 METER 152 X 152 MM 37.1 KG/METER
3	33 KV AB SWITCH 600 AMP TPGANG OPERATED
4	H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
5	33 KV 'V' CROSS ARM 1.5 MTR (5FT)- CENTRE MADE FROM 75X75X6MM ANGLE
6	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
7	33 KV TOP CLAMPS 75X75X6MM ANGLE TYPE
8	33 KV SINGLE POLE CUT POINT 100X50X6 MM CHANNEL
9	33 KV SIDE CROSS ARM (100X50X6MM MS CHANNEL)
10	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
11	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
12	ACSR DOG CONDUCTOR 0.10 SQ. INCH (100 SQ.MM. AL.EQ.), (6/4.72 + 7/1.57 MM)
13	JOINTING SLEEVES (ALUMINIUM) FOR DOG CONDUCTOR
14	STAY SET 20 MM COMPLETE
15	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
16	H.BEAM CLAMPS 65X8MM FLAT
17	STAY INSULATOR 90X65MM
18	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/47 & 48
19	CONCRETING OF H-BEAM/ RAIL POLE @ 0.94 CMT. PER POLE (INCLUDING MUFFING)
20	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
21	RED-OXIDE PAINT
22	ALUMINUM PAINT
23	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
24	DANGER BOARD ENAMELED 33 KV
25	ALUMINIUM BINDING WIRE AND TAPE
26	M S BOLT WITH NUT 16X200 MM
27	H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
28	DC.CROSS ARMS 5` (1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL
29	H.BEAM CLAMPS 65X8MM FLAT
30	33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
31	33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
32	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
33	BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM
34	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
35	STAY SET 20 MM COMPLETE
36	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
37	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/ 47 & 48
38	CONCRETING OF H-BEAM/ RAIL POLE @ 0.94 CMT. PER POLE (INCLUDING MUFFING)
39	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
40	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
41	RED-OXIDE PAINT
42	ALUMINUM PAINT
43	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
44	DANGER BOARD ENAMELED 33 KV
45	M S BOLT WITH NUT 16X200 MM
46	MS STRAIN PLATE 65X8 MM, 250 MM LONG
47	H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
48	DC.CROSS ARMS 5` (1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL
49	H.BEAM CLAMPS 65X8MM FLAT
50	33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
51	33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
52	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
53	BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM
54	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
55	STAY SET 20 MM COMPLETE
56	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
57	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/47 & 48
58	CONCRETING (1:3:6) OF H-BEAM @ 0.70 CMT.PER POLE INCLUDING MUFFING
59	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
60	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
61	RED-OXIDE PAINT
62	ALUMINUM PAINT
63	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
64	DANGER BOARD ENAMELED 33 KV
65	M S BOLT WITH NUT 16X200 MM
66	MS STRAIN PLATE 65X8 MM, 250 MM LONG
67	H- BEAM 13 METER 152 X 152 MM 37.1 KG/METER
68	DC.CROSS ARMS 5` (1.5 METER) CENTRE TO CENTRE 100X50X6MM ISMC CHANNEL
69	H.BEAM CLAMPS 65X8MM FLAT
70	33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
71	33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
72	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
73	BRACING SET FOR 5 FEET (1.5 MTR ) CENTRE DP ANGLE OF 65X65X6 MM
74	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
75	STAY SET 20 MM COMPLETE
76	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
77	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/47 & 48
78	CONCRETING (1:3:6) OF H-BEAM @ 0.70 CMT.PER POLE INCLUDING MUFFING
79	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
80	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
81	RED-OXIDE PAINT
82	ALUMINUM PAINT
83	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
84	DANGER BOARD ENAMELED 33 KV
85	M S BOLT WITH NUT 16X200 MM
86	MS STRAIN PLATE 65X8 MM, 250 MM LONG
87	33 KV SINGLE POLE CUT POINT 100X50X6 MM CHANNEL
88	33 KV,10 KN PIN COMPOSITE POLYMER INSULATOR
89	33 KV , 45 KN DISC POLYMER LONG ROD TYPE T&C INSULATOR
90	33 KV STRAIN HARDWARE (T&C TYPE) FITTINGS
91	MS STRAIN PLATE 65X8 MM, 250 MM LONG
92	EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE
93	STAY SET 20 MM COMPLETE
94	STAY GI WIRE 7/4.00 MM.(7/8 SWG)
95	BACK CLAMP FOR H BEAM POLE OF 65X8MM MS FLAT
96	H.BEAM CLAMPS 65X8MM FLAT
97	STONE BLOCK / RCC BASE PLATE SIZE 450X450X75 MM ( 2 NO PER STAY AND 1 NO FOR POLE ), DRG. NO. DISCOM/EZ/47 & 48
98	CONCRETING OF H-BEAM @1.25 CMT PER POLE (INCLUDING MUFFING)
99	CONCRETING (1:3:6) OF STAY @ 0.3 CMT. PER STAY (20MM)
100	RED-OXIDE PAINT
101	ALUMINUM PAINT
102	M S BOLT WITH NUT 16X200 MM
103	DANGER BOARD ENAMELED 33 KV
104	ANTI CLIMBING DEVICE (BARBED WIRE 3.5 KG) GS 2.5 MM DIA (12 SWG)
105	CONDUCTOR ACSR SCRAP (RETURNABLE ITEM)
106	MISC IRON SCRAP (RETURNABLE ITEM)
107	Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

Tender For Nit No: Secl/Sgp/E&M/E-Tender/2026-27/387 Diversion Of Existing 33Kv Hardi Feeder Line Of Mppkvvcl Crossing The Surface Of Damini Ug Mine To The Mine Boundary To Facilitate Safe Depillaring Operations By Lhcm And To Avoid Sterilization Of, Shahdol-Madhya Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us