|
| 1 | GROUP A (SUPPLY) |
| 2 | 48 Fibre (DWSM) OPGW fibre optic cable |
| 3 | 24 Fibre (DWSM) OPGW fibre optic cable |
| 4 | 24F (DWSM) Fiber Optic approach cable including all installation hardware set like ties/clips/cleats, conduits, ducts, supports, fittings, accessories etc. |
| 5 | Suspension clamp assembly for 24 fibre OPGW |
| 6 | Tension fittings assembly on suspension Tower for 24 fiber OPGW including all accessories at Joint box (Splicing location) |
| 7 | Tension assembly - Dead end for 24 fiber OPGW |
| 8 | Tension fitting assembly for 24 fiber OPGW including all accessories for Joint Box (Splicing Location) |
| 9 | Vibration Damper [with Armour Rod] for 24 fibre OPGW |
| 10 | Down Lead Clamp for 24 fiber OPGW |
| 11 | Joint Box (24 Fibre) |
| 12 | Joint Box (48 Fibre) |
| 13 | Joint Box (2 x 24 Fiber 1 x 48 Fibre) [for LILO location] |
| 14 | OPGW Fibre Optic Distribution Panel (FODP): Indoor Type: 48F |
| 15 | Pre-connectorised Optical Fiber Patch Cord LC TO FC 10m Simplex, PVC, Yellow (Pack of 6 patch chords) |
| 16 | TeleProtection Terminal Equipment19-Inch, Rack mountable.Network Interfaces:- 1+1 redundant, El interface with automatic failoverprotection- 2 x 2.048Mbps F.1 (120 Ohms) interface [RJ45 (F)JSubstation Interfaces:- upto 8, 2-way independent-simultaneous binary command channelsManagement: SNMP/Telnet Port (RJ45 (F)), Serial Port (USB, DB-9 COM) Serial Port, EMS, Graphical User Interface (GUI)Installation Kit: System Core Cables, Mounting Hardware,Documentation, User Manual- 2 x 48V DC Power Supply Input [Redundant]- Command Voltages : 110-125V DC / 220-250V DC- Command Voltages Set to 220-250V DCIncludes:1 x External Trip Counter Display1 x External feed-through Terminal Block (TB) 60-I/O |
| 17 | IP41 complied 19\\" Telecom Cabinet1800 (H) x 600 (W) x 600 (D) |
| 18 | LAN cable, Cat 5e (Drum of 305m) |
| 19 | Cat-5e Rj 45 Cable Connector - Pack Of 100 Pieces |
| 20 | 12 Core (2.5 sq.mm.) Armoured Control Cable |
| 21 | 1.1kV grade 2C x 6 sq. mm. PVC power cable |
| 22 | 1.1kV grade 4C x 16 sq. mm. PVC power cable |
| 23 | SDH Equipment ( STM- 4 MADM, upto 3 MSPprotected directions)Base Equipment (Common cards, Crossconnect/control cards, Optical base cards, Power supply cards, power cabling, other hardware & accessories including sub-racks, patch cords, DDFetc, fully equipped excluding Optical interface & Tributary Cards |
| 24 | Optical Interface/SFP L4.1 |
| 25 | Optical Interface/SFP L4.2 |
| 26 | Tributary Interface - E1 Interfaces (Minimum 63 nos. ) |
| 27 | Ethernet interfaces 10/100 Mbps with Layer-2switching (Minimum 16 nos.) |
| 28 | Equipment cabinet for SDH |
| 29 | 25A SMPS based 48V DC power Supply (DCPS) system |
| 30 | 300Ah VLRA type battery bank for above DCPS |
| 31 | GROUP B (ERECTION) |
| 32 | Joint Box (24 Fibre) |
| 33 | Joint Box (48 Fibre) |
| 34 | Installation of 24Fibre (DWSM) OPGW Cable alongwith associated Hardware fittings & vibration dampers in Off-line condition |
| 35 | Installation of 48Fibre (DWSM) OPGW Cable alongwith associated Hardware fittings & vibration dampers in Off-line condition |
| 36 | Fibre Optic Approach cabling: Including installation hardware like ties/clips/cleats, conduits, ducts, supports, fikings,accessories etc.: 24 Fibre/ 48 Fiber (upto 1 Km) |
| 37 | TeleProtection Terminal Equipment19-Inch, Rack mountable.Network Interfaces:- 1+1 redundant, El interface with automatic failoverprotection- 2 x 2.048Mbps F.1 (120 Ohms) interface [RJ45 (F)JSubstation Interfaces:- upto 8, 2-way independent-simultaneous binary command channelsManagement: SNMP/Telnet Port (RJ45 (F)), Serial Port (USB, DB-9 COM) Serial Port, EMS, Graphical User Interface (GUI)Installation Kit: System Core Cables, Mounting Hardware,Documentation, User Manual- 2 x 48V DC Power Supply Input [Redundant]- Command Voltages : 110-125V DC / 220-250V DC- Command Voltages Set to 220-250V DCIncludes:1 x External Trip Counter Display1 x External feed-through Terminal Block (TB) 60-I/O |
| 38 | IP41 complied 19\\" Telecom Cabinet1800 (H) x 600 (W) x 600 (D) |
| 39 | 12 Core (2.5 sq.mm.) Armoured Control Cable |
| 40 | 1.1kV grade 2C x 6 sq. mm. PVC power cable |
| 41 | 1.1kV grade 4C x 16 sq. mm. PVC power cable |
| 42 | Fibre Optic Distribution Panel (FODP): Indoor Type: FC Coupling and mounted on ETSI 19” rack or slimline rack: 48/96 Fibre |
| 43 | SDH Equipment ( STM- 4 MADM, upto 3 MSPprotected directions)Base Equipment (Common cards, Crossconnect/control cards, Optical base cards, Power supply cards, power cabling, other hardware & accessories including sub-racks, patch cords, DDFetc, fully equipped excluding Optical interface & Tributary Cards |
| 44 | Optical Interface/SFP L4.1 |
| 45 | Optical Interface/SFP L4.2 |
| 46 | Tributary Interface - E1 Interfaces (Minimum 63 nos. ) |
| 47 | Ethernet interfaces 10/100 Mbps with Layer-2switching (Minimum 16 nos.) |
| 48 | Equipment cabinet for SDH |
| 49 | 25A SMPS based 48V DC power Supply (DCPS) system |
| 50 | 300Ah VLRA type battery bank for above DCPS |
| 51 | GROUP C (DISMANTLING) |
| 52 | De-Stringing of Earthwire only from 132 KV S/C transmission line complete in all respect including transportation and handing over the dismantled materials to the TPTL Stores. Please Enable Macros to View BoQ information |
