|
| 1 | Taking down shutter of any description exc 1 sqm and n exc 2.00 sqm each and removing to store yard all as specified and directed by Engineer-in-Charge. |
| 2 | Refixing of shutter in same opening of any description exc 1 sqm and n exc 2.00 sqm each all as specified and directed by Engineer-in-Charge. |
| 3 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 4 | M&L Brick work with old size fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed. |
| 5 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. |
| 6 | M&L 10mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge . |
| 7 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge. |
| 8 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge. |
| 9 | M&L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified. |
| 10 | M&L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified. |
| 11 | M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, two or more coats on new/ Old surface over 1.5 mm thick wall care putty complete all as specified and directed by Engineer-in-charge. |
| 12 | M&L applying two coats of cement based paint on newly/Old plastered or unplastered wall surface over a coat of alkali resistant primer including preparation of surfaces, complete all as specified. |
| 13 | M&L for preparation of new/Old plastered surfaces of walls and applying two coats of exterior grade wall putty (each coat min. 1.5 mm thick) and making it smooth with sand paper by mechanical method then applying two coats of weather proof exterior emulsion over a coat of exterior primer complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles all as specified.& directed by Engineer -in-charge. |
| 15 | M&L single piece in each length 16-18mm thick Granite (of any type) work (table rubbed and polished) in window- cills, Sides of window & on Top of window and shall be 10mm projected (outside) and flush with wall inside. |
| 16 | M&L 18-20mm thick machine cut kota stone slab (table rubbed and polished) as in flooring laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr In Charge complete all as specfied and directed. |
| 17 | Cutting, grinding, cleaning and treating the surface of existing kota stone flooring with beeswax polishing complete as directed by Engr-in-Charge. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises. |
| 19 | M&L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 15mm thick cement sand plaster (1:4) complete all as specified and directed by Engineer - in - Charge. |
| 20 | M&L for glazed ceramic coloured tiles (joint free) 7mm thick 300 x 200mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 15mm thick cement sand plaster (1:4) complete all as specified and directed by Engineer - in - Charge. |
| 21 | M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 22 | M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.18 sqm but n. exc, 0.38 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 23 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and incl 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge. |
| 24 | M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base all as specified. |
| 25 | M&L cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in floors 25 mm thick for tiles all as specified.& directed by Engineer -in-charge.. |
| 26 | Demolition of cement concrete ( un re-inforced) of any description in ground floor and pavings Nexc15 cm thickness (below or above GL) |
| 27 | S&F in repair 15mm bore brass CP extension nipple 25mm long suitable for taps/valves and fixed all as specified |
| 28 | Supply and fix in repair only brass spindle suitable for bib cock / angle cock / pillar cock / concealed stop cock as per sample approved by GE. |
| 29 | S&F in repair brass chromium plated water tap handle or knob of specification and make as required at site and as directed by Engr-in-charge. |
| 30 | Supply and fix in repair only brass spindle suitable for wall and sink mixer of make of Jaquar of suitable size as required at site as per sample approved by GE. |
| 31 | Supply and fix in repair only brass brass chromium plated water tap handle or knob of make of Jaquar of suitable size and specification as required at site and as directed by Engr-in-charge. |
| 32 | S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia all as directed. |
| 33 | S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed. |
| 34 | S&F in repair Viterous China squating pan \\"ORISSA\\" pattern size 580MMX440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified. |
| 35 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, sheet cover complete. |
| 36 | Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge . |
| 37 | Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall, floor etc complete all as specified and directed. |
| 38 | Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall, floor etc complete all as specified and directed. |
| 39 | S&F 110mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 40 | S&F 110mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 41 | S&F 75mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 42 | S&F 75mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 43 | S&F 110mm PVC(SWR) bends any radius complete all as specified and directed. |
| 44 | S&F 75mm PVC(SWR) bends any radius complete all as specified and directed. |
| 45 | Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and as directed by Engineer-in-charge. |
| 46 | Supply & fixing PVC (SWR) vent cowl suitable for 110mm bore PVC pipe complete all as specifiedand as directed by Engineer-in- charge. |
| 47 | Supply & fixing PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specifiedand as directed by Engineer-in- charge. |
| 48 | Supply & fixing PVC (SWR) of size 110 mm sanitary connection socket to fit out let of WC complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 50 | Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 51 | S&F 110mm PVC(SWR) branch piece, single (single Y) equal or unequal fixed with solvent cement, with oval access door, complete all as specified and directed. |
| 52 | S&F PVC (SWR) floor trap 100/75 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 |
| 53 | S&F 100mm bore PVC stack clamps of suitable for 75mm and 110mm bore pipes fixed to walls including bolts and nuts and securing ends of stays completeall as specified and directed. |
| 54 | Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store |
| 55 | Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store |
| 56 | Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re-fixing or removal to store |
| 57 | Supply & fixing 3 layer PPR CONCEALED PIPES of size 20mm SDR 7.4 (PN16) UV stabilised having thermal stability for hot and cold water supply incl. all PPR plain and brass threaded polypropylene random fittins fixed to walls complete all as specified. |
| 58 | Supply & fixing 3 layer PPR CONCEALED PIPES of size 25mm SDR 7.4 (PN16) UV stabilised having thermal stability for hot and cold water supply incl. all PPR plain and brass threaded polypropylene random fittins fixed to walls complete all as specified. |
| 59 | S&F Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipeS&Fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. Make : Supreme/Vectus or equivalent |
| 60 | Supply & fixing mild steel tubes of size 15 mm bore (medium grade) galvanised with all fittings and fixed complete to wall all as specified. |
| 61 | Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittings and fixed complete to wall all as specified. |
| 62 | Supply & fixing mild steel tubes of size 25 mm bore (medium grade) galvanised with all fittings and fixed complete to wall all as specified. Please Enable Macros to View BoQ information |
