|
Tender for Marking Centre Line And Stop Lines Etc. On Road As Per Irc Pattern With Thermoplastic Paint Of Approved Quality And Make With 8% Glass Beads Laid On The Road Surface At Temperature 160 C With A Special Applicator Machine Complete With A Special Applicator Machine Complete With Labour Material And Traffic Diversion Arrangements. , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 801.3.1 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Morth Specification Clause 801 600 Mm Equilateral Triangle , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 801.3.1 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Morth Specification Clause 801 600 Mm Circular , Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 801.3.1 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Morth Specification Clause 801 600 Mm X 450 Mm Rectangular , Raised Payment Marker (Cats Eye): Supplying And Fixing Of Molded Shank Raised Pavement Markers Made Of Abs Moulded Body And Polycarbonate Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 35000 Kilogram Tested In Accordance To Asim D 4280 & Astm D 788. The Height Of Road Stud Is 20Mm, Width 100Mm, Length 100Mm And Minimum Reflective Area Of 13 Sqcm On Each Side.The Strength Of Detachment Of The Integrated Cylender Shank Not Less Than 14+/-2Mm (Thickness) And Height Not Less Than 30+ 2Mm From The Body. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive , Providing And Fixing Pvc Bump Speed Breakers Size 350 Mm X 250 Mm X 50 Mm Fitted With Key Hooks Complete With Labour Material And Traffic Diversion Arrangements. , Painting Two Coats With Superior Grade Synthetic Enamel Paint Of Approved Quality To Give An Even Shade Including Writing Lettering And Figures With Synthetic Enamel Paint As Per Irc Specifications. Traffic Sign Boards (Cautionery, Mandatory & Informatory) , Painting Two Coats Including Prime Coat With Epoxy Paint Of Approved Brand On Concrete/Steel Surfaces After Through Cleaning Of Surface To Give An Even Shade As Per Drawing And Morth Specification Clause 801 , Supply & Fixing Of Flood Gauge (Water Gauge) As Per I.R.C. 67 Standard 200 Cm Long Fixed On Angle Iron Posts 50X50x6 Mm, 2.6 M. Long.
|