|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ callbell point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable in surface / recessed steelconduit, with piano type switch, phenolic laminated sheet,suitable size MS box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required :Group -B |
| 2 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amp switch |
| 3 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp. Socket outlet. |
| 4 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connectionsb ut excluding modular plate etc. as required.. 15/16 A switch |
| 5 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 Amp socket outlet |
| 6 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connectionsbut excluding modular plate etc. as required.Bell push |
| 7 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc. as required. 2way 5/6 amp.switch. |
| 8 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 9 | Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. |
| 10 | Supplying and fixing brass batten/ angle holder including connection etc. asrequired. |
| 11 | Supplying and fixing call bell/ buzzer suitable for singlephase, 230 V, complete as required. |
| 12 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earthbar,dinbar,interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator):-12way Double door |
| 13 | Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required. 63 Amp. |
| 14 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA,\\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required. |
| 15 | Wiring for circuit/ submain wiring alongwith earth wire withthe following sizes of FRLS PVC insulated copperconductor, single core cable in surface/ recessed mediumclass PVC conduit as required. 2x2.5 sqmm + 1X2.5sqmm earth wire |
| 16 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 17 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compactfluorescent fitting of all types, complete with all accessories and tube etc.,including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring thedown rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 18 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.:- 25 mm |
| 19 | Supplying and fixing metal box of following sizes (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front includingpainting etc as required. 150 mm X 75 mm X 60 mm deep |
| 20 | Demolishing cement concrete work manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in- charge. |
| 21 | Dismantling tile work in floor and roofs laid in cement mortar including stacking material within 50 meters lead:- For thickness of tiles 10 mm to 25mm |
| 22 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : :- 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 23 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5meters and under,including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand). |
| 24 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make, size, and colour, conforming to IS: 4457, laid in acid and/or alkali resistant mortar bedding, including cutting, fitting, and grouting of 3 mm wide joints with epoxy grout comprising 0.70 kg organic coated filler of approved shade mixed with 0.10 kg hardener and 0.20 kg resin per kg, including filling, finishing, and all incidental works complete as per the directions of the Engineer-in-Charge:- In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) :- Acid and alkali resistant tile |
| 25 | Providing and fixing floor mounted, white vitreous china water closet of approved brand/make, shape, size and pattern including white vitreous china cistern of capacity 10 litres with flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in- Charge. |
| 26 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore Class Heavy Duty (C) with 3.2 mm thickness |
| 27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 28 | Providing and fixing white vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings. |
| 29 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (ofapproved quality) complete with 6 mm thick hard board ground fixed towooden cleats with C.P. brass screws and washers complete. |
| 30 | Providing and fixing unplasticised PVC Connection pipe with brass union : 45 cm long 15 mm nominal bore |
| 31 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:15 mm nominal bore . |
| 32 | Providing and fixing pillar cock15mm dia in all respect make Hindware |
| 33 | Providing and fixing stop cock15mm dia in all respect make jaquar |
| 34 | providing and fixing 8 mm dia C.P. /S.S Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in charge |
| 35 | Providing and fixing C.P. brass Angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 36 | Providing and fixing C.P. brass towell rail (Cera/Hindware/Jal or equivalent brand) complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. 450 mm long towel rail with total length of 495 mm , 78 mm wide and effective height of 888 mm, weighing not less than 170 gms. |
| 37 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia |
| 38 | Providing and fixing 600x120x5mm glass shelves with edges round off supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws , rawl plugs etc. complete Please Enable Macros to View BoQ information |