|
| 1 | (a)Cleaning the walls and ceiling by scraping, sand papering and smoothening down the surface including putting. |
| 2 | Stripping off worn out plaster and raking out joints of walls,celing setc.up to any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 3 | (a)Applying 2coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1bondingagent : 4water: 6cement) asperManufacturer's specification [Cement to be supplied by the Department] |
| 4 | Plaster (towall, floor, ceilingetc.) with sand and cementmortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] 20 mm thick plaster . |
| 5 | 1st floor |
| 6 | b)Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick).) |
| 7 | Applying Interiorgrade Acrylic Primer of approved quality andbrand on plastered or cencrete surface old or new surface to receive Distemper/Acrylicemulsionpaint including scraping and preparing the surface throughly,completeaspermanufacturer'sspecificationand as per direction of the EIC. (In Ground Floor)(a) One Coat ) Water based interior grade Acrylic Primer |
| 8 | Applying Acrylic Emulsion Paint of approved make and brandon walls and ceiling includings and paperinginintermediate coats including putty(to be done under specific instruction of Superintending Engineer) : (Two coats) i) Luxury Quality |
| 9 | (b)Priming one coat on timber or plastered surface with syntheticoil bound primer of approved quality including smoothenings surfaces by sand papering etc. |
| 10 | (a)Priming one coat on steel orothermetal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 11 | (A)Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On timber or plasterd surface : With super gloss (hi-gloss) (iv) Two coats (with any shade except white) |
| 12 | (b) On steel or other metal surface :With super gloss (hi-gloss) (iv) Two coats (with any shade except white) |
| 13 | Anodised aliminiumD-type handle of approved quality manufactured from extruded sectionconforming to I.S. specification (I.S. 230/72) fittedand fixed complete:a) With continuous plate base (Hexagonal/ Round rod)ii) 100 mm grip x 10 mm dia rod. |
| 14 | (b)Supplying 'Godrej' mortice lock chromium plated with keys 6levers including fitting & fixing complete |
| 15 | (i) Door stopper.(Brass) |
| 16 | ii) Godrej Hydraulic door closer fitted and fixed completea) Heavy type |
| 17 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C.(i) Plastic (hallow type) white |
| 18 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etca) With 'P' trap |
| 19 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe |
| 20 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fitting scomplete,C.I. brackets including two coats of painting to bracket etc |
| 21 | Supplying, fitting and fixing bib cock or stop cock(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand) |
| 22 | Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock- 15 mm. (Equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand) |
| 23 | Supplying, fitting and fixingwhitevitreous chinabest qualityapproved make wash basin with C.I. bracketson 75mmX 75mm wooden blocks, C.P.waste fittings of 32 mm dia.,one approved quality brass C.P.pillar cock of 15mmdia.,C.P.chainwithrubberplugof30mmdia.,approved quality P.V.C.waste pipe with C.P.nut 32mmdia.,900mmlongapprovedquality P.V.C. connection pipe with heavy brass C.P. nut includingmendinggoodall damagesandpainting thebracketswith twocoatsofapproved paint.(ii) 550 mm X 400 mm size |
| 24 | Supplying, fitting and fixing approved brand P.V.C.CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(v) 900 mm long |
| 25 | Add : GST @18% (tweleve percent) on Rs.217986.00 i.e. Total Amount over item No. 1 to 21. |
| 26 | Add : Labour Welfare Cess @ 1 % (one percent) on Rs.257223.00 i.e. Total amount after GST Please Enable Macros to View BoQ information |