|
| 1 | Schedule-A |
| 2 | M&L for Cutting out cracks 'V' section on existing roofs or terrace cleaning out and filling solidly or grouting cement and sand slurry 1:3 complete all as specified and directed by Engr-in-Charge. |
| 3 | Demolition of cement concrete of any description and in any position not otherwise specified and provided (in sunken portion area) , removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed. |
| 4 | M&L for PCC 1:5:10 type E-2 using 40 mm brick aggregate as in sunken floor slab complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in seal the joints in sunken portion , rounded or chamffered on edges complete all as specified and directed by Engr in Charge. |
| 6 | M&L for providing 40 mm thick cement concrete 1:2:4 using 12.5mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for 15 mm thick rendening in sunken portion in cement mortar 1:3 including water proofing liquid as per manufacutre as per specification finished fair even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge.(water proof liquid paid and measured seprately) |
| 8 | M&L for prepartion of surface including cleaning and appling Dr fixit pidfin 2k (acrlic cementitous, polymer modified elastomeric waterproofing & protective coating composed of best quality portland cement, properly selected & graded aggregates, additives & acrylic emulison polymer as binder ) two coats complete all as specified and as directed by Engr-in-Charge. Note : work will be executed by authorised appliactor only. |
| 9 | M&L for medium grade 50 mm bore GI pipe fixed in to the sunken portion upto the wall for taking out leakage water and making good to existing surface complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MoD land, complete all as specified and directed. |
| 11 | M&L for 40mm thick PCC (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 12 | Material and labour, 10 mm thick cement plaster in CM (1:3) mixed with WPC as per manufacturer’s instructions on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 13 | M&L water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified.(c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.00 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 150gm/sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed. |
| 14 | Supply only water proofing liquid compoundcomplete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for applying one coat of aluminium heat resistance paint on the roof as per manufacture instructions complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for roof treatment applying PU & Acrylic based Elostomeric Coat in UV shafe having OVOC coating apply two coats over one coat of prrimer or as per manufacturer's instructions to protect roof over clean plastered surface complete all as specified & directed by Engr-in-charge. |
| 17 | Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheets any thicknes in roof covering all as specified and directed by Engr-in-Charge. |
| 18 | S&F for asbestos cement 6mm thick corrugated or semi-corrugated sheets in roof fixed with L-type or J-type crenked hook bolts all as directed by Engr-in-Charge. |
| 19 | S&F Asbestos cement 6mm thick in two pieces adjustable plain ridge fixed wirth l-type and J-type hook bolts complete all as specified and as directed by Engr-in-Charge. |
| 20 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-Charge. |
| 21 | S&F in repair 0.5 mm thick pre coated thick galvalume aluminium zink coated GI based corrougated steel sheeting or curved shape of any colour having tansile strength of 550 MPA as in roof covering/glading to wall fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J-type or cranked hook botls and washer in roof, wall and similar work etc all as specified and directed by Engr-in-Charge. |
| 23 | Dismantling of cast iron , concrete, asbestos, PVC pipes of any dia and discription from trenches or with walls etc complete all as specified. |
| 24 | S&F PVC pipes single socketed in any length with rubber ring joints fixed to wall (110mm bore) including flat iron claimp for proper fixing complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S&F PVC pipes single socketed in any length with rubber ring joints fixed to wall (75mm bore) including flat iron claimp for proper fixing complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F PVC bends 110mm dia complete all as specified by Engineer-in -Charge |
| 27 | S&F PVC bends 75mm dia complete all as specified and directed. |
| 28 | S&F Cast iron soil, waste and vent pipes, 100mm dia in any length with or without ears with cement joints, laid in trenches or in floors |
| 29 | S&F Cast iron soil, waste and vent pipes, 75mm dia in any length with or without ears with cement joints, laid in trenches or in floors |
| 30 | S&F for 100 mm bore Bends (any radius) with oval access door diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 31 | S&F for 75 mm bore Bends (any radius) with oval access door diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 32 | Dismantling of wall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land. |
| 33 | M&L for glazed ceramic colour designer concept glazed ceramic tiles in patches matching with existing tile 200x300x7mm or 450x350x 7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick Rendering in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting, dado etc complete all as specified and as directed by Engineer-in-Charge. |
| 34 | M&L for joint free coloured non skid coloured ceramic tiles in patches matching with existing tile 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6) complete all as specified and as directed by Engineer-in-Charge. |
| 35 | M&L for vitrified tiles in patches matching with existing tile 10 mm thick light shade (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 36 | M & L for Granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform, verticle surfaces and any position over & including 15mm thick bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite chamfering and rounding of edges where required all as specified and directed by Engr-in-Charge. |
| 37 | M&L for 10 mm thick vitrified glossy finsih for parking/ path (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 10 mm thick in cement mortar in 1:6 , complete all as specified and as directed by Engr-in-charge. |
| 38 | M&L glossy chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed , over cement screed bed 15mm thick cement motor 1:6 all as specified and as directed by Engr-in-charge. |
| 39 | M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for cement concrete 1:3:6 type C-1 (40mm graded stone aggregate) 75 mm thick in plinth protection and courtyard, finished cement surfaces even and smooth with out using extra cement , complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Dismantling mild steel work of any description not otherwise described for complete all as specified |
| 42 | S&F for MS angle iron as in posts, chowkhats and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing with mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 (Gde-E-165 quality-B. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement. |
| 43 | S&F Steel work in tubular trusses, pillars and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 all as specified and directed by Engr-in-Charge. |
| 44 | M&L for Preparation of new steel surface exc 10 cm width/girth and applying two coat synthetic enamal paint over one coat of red oxide Primer all as specified and directed by Engineer-in-charge. |
| 45 | S&F in repair PTMT bib tap 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore, complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S&F in repair 10ltr capacity PVC valveless syphonic action type flushing systern low level white with inlet ball valve ,float & handle including brackets complete all as specified and as directed by Engineer-in-Charge. |
| 47 | S&F heavy class SS grating 100x100mm with Cockroach proof SS strainer of approved design including setting in floor with cement mortor to match with floor finish as per architectural requirement and suitable for waste, all as specified and directed by Engr-in-Charge. |
| 48 | S&F repair in of PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified by Engineer-in -Charge . |
| 49 | S&F PTMT Urinal waste pipe of standard pattern, 80 cm long, 31/32 mm bore all as specified and directed by Engr-in-Charge. |
| 50 | S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete including P traps complete all as specified and as directed by Engineer-in-Charge. |
| 51 | S&F in repair wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and as directed by Engineer-in-Charge. |
| 52 | S&F in repair for vitreous china wash basin hand white flat backsize 550x400 including cutting for and pinning in ends of brackets including fixing of 32 mm low dencity polylethyne pipes (LDPE)of pressure rating 6kg/cm2,cupling ,PVC connection with 15 mm dia PTMTcheknuts ,brackets all complete all as specified and as directed by Engineer-in-Charge. |
| 53 | S&F in repairs vitreous china coloured half stall urinal brass chromium plated brackets , fitting and waste coupling, CP bottle trap , urinal spreder , PVC connection etc complete all as specified and as directed by Engineer-in-Charge. |
| 54 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed by Engr-in-Charge. |
| 55 | S&F in repair bib taps 15mm bore long body cast copper alloy fancy type chormium plated butter fly handle screwed down including complete all as specified and as directed by Engineer-in-Charge. |
| 56 | S&F in repair angle/ stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and as directed by Engineer-in-Charge. |
| 57 | S&F in repair 125 mm dia fancy type shower roses brass chromium plated with C P arms of length upto 60 cm for 15mm bore GI pipe. complete all as specified and as directed by Engineer-in-Charge. |
| 58 | S&F in repair 15 mm brass CP mixer for mixing hot and cold water for sink mixer with wall flange extended operating lever, swinging spout complete all accessories as required complete all as specified and as directed by Engineer-in-Charge. |
| 59 | S&F in repair 15 mm brass CP mixer for mixing hot and cold water for wash basin mixer with wall flange extended operating lever, swinging spout complete all accessories as required complete all as specified and as directed by Engineer-in-Charge. |
| 60 | S&F in repair 15 mm brass CP mixer for mixing hot and cold water for non telephonice wall mixer with wall flange extended operating lever, swinging spout complete all accessories as required complete all as specified and as directed by Engineer-in-Charge. |
| 61 | S&F in repair 100x100 mm ultra slim staitness steel heavy rain shower head, fancy type shower roses brass chromium plated with C P arms of length upto 60 cm for 15mm bore GI pipe complete all as specified and as directed by Engineer-in-Charge. |
| 62 | S&F in repair PVC tank cover for 500/1000 Ltrs. complete including locking arrangement complete all as specified and as directed by Engineer-in-Charge. |
| 63 | S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description inculding dismantling of tank complete all as specified & directed by Engineer in charge. |
| 64 | S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description inculding dismantling of tank complete all as specified and directed by Engineer in charge. |
| 65 | S&F for steel water tubing 15mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete incl taking down old GI pipe all as specified and as directed by Engineer-in-Charge. |
| 66 | S&F for steel water tubing 20mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete incl taking down old GI pipe all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F CPVC water tubing 20 mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, incl taking down old pipe line in concealed and surface all as specified and directed by Engr-in-charge. Note : Pipe and fittings made from CPVC shall be clearly marked with manufactures name and trade mark. manufacturer test certificate (MTC) shall be provided. |
| 68 | S & F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100mm bore pipe etc complete. |
| 69 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 70 | S&F 1 mm thcik Mild steel sheet eaves gutters, exc 100 dia and n exc 150 mm dia of eaves gutters, galvanished class 3, half round with rounded edges all as specified and directed by Engr-in-Charge. |
| 71 | Taking down Chowkhats or frames n exc 1.5 Sqm each without taking off shutter from the frame all as specifed and directed by Engr-in-Charge. |
| 72 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solventcement, suppling & fixing in the frame at site as per specification & drawing. |
| 73 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 74 | Taking down Chowkhats or frames exc 1.5 Sqm but n exc 4 Sqm each without taking off shutter from the frame all as specifed and directed by Engr-in-Charge. |
| 75 | S&F Powder Coating (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and directed by Engr-in-Charge . |
| 76 | S&F powder coating of any colour (Thickness of powder coating not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F powder coating of any colour (Thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-Charge. |
| 78 | M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F aluminium anodized grill DG 208 design as per approved pattern including aluminium beads etc complete all as specified and directed by Engr-in-Charge |
| 80 | S&F 5.5 mm thick tinted glass of selected quality fixed to aluminium frame of any section as in item here-in-before incl snap fit aluminium clips of polyester powder coated along the glass with rubber gasket complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F IN Replacement of LED Acrylic Sign board with specification- navy Blue back,round, yellow acrylic LED letters, with MES and corps of Engineer logos on both sides. Text, GE(AF) Gurgaon no.1 Size 20ftX3ft complete all as specified and as directed.(Qty-60Sqft). |
| 82 | Note :- The amount of Rs 64556.00 against Schedule of Credit on Srl Page 141 & 142 shall be deducted from the total amount quoted against Sch 'A' Please Enable Macros to View BoQ information |
