|
| 1 | Material and Labour for disconnecting existing PVC water tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and hoisting if required reconnecting and refixing in position capacity exceeding 250 ltrs and n exc 500 ltrs, Complete all as specified and directed by Engineer-in-Charge. |
| 2 | All as per Item No 01 here in before but of 1000 litres capacity Complete all as specified and directed. |
| 3 | Taking down existing roof treatment in any position with bitumenous felt including cement plaster of any thickness in roofs (other than ground floors), beams, chajjas, staircase etc and removing the rubbish to a distance exceeding250m and n. exc 500m deposited where directed Complete all as specified and directed by Engineer-in-Charge. |
| 4 | Dismantling of exisiting old padding concrete of any thickness of existing water proofing treatment over the RCC slab other than beams, chajjas, staircase etc by chipping of with proper tools viz chiesel and with applying reasonable force so as to avoid any damages to existing RCC roof slab, Complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and Labour for cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling / padding course on roof slab, chajjas, projections on similar surfaces existing with slope, kerbs, rounded or chamfered edges, making the surface even and smooth without using extra cement, including using liquid water proofing compound, Complete all as specified and directed by Engineer-in-Charge. Note: supply of Integral water proofing compound will measured and paid seperately. |
| 6 | Material and Labour for 10mm thick cement plaster in CM 1:4 over PCC (while concrete is green) using approved liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.Note : Water proofing compound shall be measured and paid separately. |
| 7 | Supply only liquid integral water proofing compoud complete all as specified and directed. |
| 8 | Material and Labour for Applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the old membrane and finally applying two coats of aluminium paint @ 0.10 ltrs/Sqm, Complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and Labour for 3mm thick APP pre-fabricated membrane with non woven polyester matt central core of 160 gsm (min) impregnated and coated on both sides with layer of APP modified bitumen and finished with micro-perforated heat fusible polythene film on both surfaces over 0.3 ltrs/Sqm bituminous primer confrming to IS-3384. The weight of APP membrane shall not be use than 3.0 Kg/Sqm and laid over primed surface by using LPG/Butane torch and apply uniform pressure with roller. The overlap of membrane shall be 100mm on sides and 150mm on end laps. Applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 ltrs/Sqm, Complete all as specified and directed by Engineer-in-Charge.Note: (i) The work shall be executed only through authorised applicator of manufacturer(ii) Contractor to submit guarantee of treatment for 10 Years. |
| 10 | Dismantling ceiling boards/AC/Fiber /pulp/insulation boards/slabs any thickness including cover fillets, Complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material and Labour for providing and fixing gypsum board 12mm thick in ceilling fixed with screw as per manufacturers instruction with and including anodised aluminium snap grid of size 600X600mm frame work for false ceilling, Complete all as specified and directed by Engineer-in-Charge. |
| 12 | Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles, Complete all as specified and directed by Engineer-in-Charge. |
| 13 | Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm, Complete all as specified and directed by Engineer-in-Charge. |
| 14 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, Complete all as specified and directed by Engineer-in-Charge. |
| 15 | Dismantling of timber rails, posts, rafters, purlins etc under 40 Sq cm in section in unframed work, Complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and Fix 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, wall etc, Complete all as specified and directed by Engineer-in-Charge. |
| 17 | All as per item No.16 above but except sheet Complete all as specified and directed. |
| 18 | Supply and Fix 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, Complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply and Fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws, Complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material and Labour for 2nd class hard wood plain fillets rectangular or square in section clean sawn secured with nails exc 06 Sq cm but not exc 13 Sq cm, Complete all as specified and directed by Engineer-in-Charge. |
| 21 | All as per item No. 20 above but except battens/fillets Complete all as specified and directed. |
| 22 | Material and Labour for 2nd class hard wood clean sawn batten sectional area exc 5 & n.exc 15 Sq cm spaced at 30 cm centre to centre, Complete all as specified and directed by Engineer-in-Charge. |
| 23 | All as per item No. 22 above but fixing only Complete all as specified and directed. |
| 24 | Preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with creosote, oil Complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material and Labour for roof tiles Mangalore pattern inter locking at side joints laid dry Complete all as specified and directed by Engineer-in-Charge. |
| 26 | All as per item No 25 above but except tiles Complete all as specified and directed. |
| 27 | Material and Labour for ridge or hip tiles to suit Mangalore pattern roofing tiles bedded and jointed in cement mortar 1:6, Complete all as specified and directed by Engineer-in-Charge. |
| 28 | All as per item No 27 above but except ridge tiles Complete all as specified and directed. |
| 29 | Demolition of cement concrete above ground floors exc 15 cm thickness as in sunken floors or in similar works, Complete all as specified and directed by Engineer-in-Charge. |
| 30 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying first layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours and second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) |
| 31 | Material and Labour for Cement concrete in foundations, filling and mass-concrete 1:5:10 Type E2 (Using 40mm Graded crushed stone agrregate as in sunken floors, Complete all as specified and directed by Engineer-in-Charge. |
| 32 | Material and Labour for 40mm thick Cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) as in sub base of floor, Complete all as specified and directed by Engineer-in-Charge. |
| 33 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, Complete all as specified and directed by Engineer-in-Charge. |
| 34 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and jointed in cement mortar or bedding, Complete all as specified and directed by Engineer-in-Charge. |
| 35 | Demolition of Cement Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level), Complete all as specified and directed by Engineer-in-Charge. |
| 36 | Material and Labour for 40mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base of flooring, Complete all as specified and directed by Engineer-in-Charge. |
| 37 | Material and Labour for 75mm thick cement concrete type D2 1:4:8 using 40mm graded stone aggregate as in sub base, Complete all as specified and directed by Engineer-in-Charge. |
| 38 | Material and Labour for 100 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protections/ hard standing path etc finishing the surface without using extra cement even and smooth, Complete all as specified and directed by Engineer-in-Charge. |
| 39 | Material and Labour for coloured Non Skid ceramic tiles 7 mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and directed by Engineer-in-Charge. |
| 40 | Material and Labour for coloured Non Skid ceramic tiles 7 to 8mm thick polished (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and directed by Engineer-in-Charge. |
| 41 | Material and Labour for double charged Vitrified ceramic tiles 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and directed by Engineer-in-Charge. |
| 42 | Material and Labour for double charged Vitrified ceramic tiles 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 : 3 as backing coat, Complete all as specified and directed by Engineer-in-Charge. |
| 43 | Material and Labour for Light coloured Glazed ceramic tiles in vertical surface as in skirting or dado 350 mmX 250 mm X 7 mm / 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement mortar 1 :3 as backing coat, Complete all as specified and directed by Engineer-in-Charge. |
| 44 | Material and Labour for 20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite, laid over and including 15mm thick screed bed in CM 1:4 Complete all as specified and directed by Engineer-in-Charge. |
| 45 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, Complete all as specified and directed by Engineer-in-Charge. |
| 46 | Drilling holes on granite, cudappa or trap stone for bolts. Pipes, etc. n.exc 25 mm dia, Complete all as specified and directed by Engineer-in-Charge. |
| 47 | Material and Labour for Machine cut cudappa stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 48 | Material and Labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over 10 mm thick backing coat in CM 1:3 jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type, Complete all as specified and directed by Engineer-in-Charge. |
| 49 | Taking down gutters and rain water pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store, Complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls, Complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply and Fix 110 mm bore PVC (SWR) bends of any radius, Complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply and Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls, Complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and Fix 75 mm bore PVC (SWR) bends of any radius, Complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and Fix 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement, Complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and Fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm, Complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply and Fix in repairs Vitreous China wash basin, white, flat back, size 550mmx400mm excluding taps, waste chain and plug and porcelain stopper fixing on existing brackets, including supply and fixing of flexible waste outlet pipe of 32 mm dia of required length, Complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and Fix 32mm dia bore waste coupling of PTMT (half or full threaded) Minimum weight 45gms, suitable for vitreous china wash basin, Complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply and Fix in repairs Swan Neck fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 675 grams), Complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and Fix in repairs 10Litres capacity low level PVC flushing cistern valveless, syphonic action type, , white, with inlet, ball valve, float and handle including brackets, Complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply and Fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts (excluding flushing cistern and flush pipe) including pan seat cover, Complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply and Fix in repairs Vitreous China squatting pan, `Orissa' pattern, size 580 mm x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of concrete bedding, Complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and Fix in repair 15mm bore Fancy type long body chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams), Complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply and Fix in repairs 15mm bore chromium plated Angle cock, cast copper alloy screwed down high pressure, screwed both ends for iron pipe or for unions ((minimum weight 400 grams), Complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply and Fix in repairs 20mm bore Gun-metal, globe or gate valve, with iron wheel head, screwed both end for iron pipe and fixed, Complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply and Fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia, Complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and Fix in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia, Complete all as specified and directed by Engineer-in-Charge. |
| 67 | Supply and Fix in repair stainless steel plate rack of size 750mm x 1000mm made out of 1mm thick stainless steel sheet of grade 304 fixed all as per manufacturers instructions, Complete all as specified and directed by Engineer-in-Charge. |
| 68 | Supply and Fix in repairs bathroom mirror 450mm x 600mm bevelled edge mirror of selected quality glass mounted on 6mm thick PVC board and fixing with plastic plugs by means of brass srcews etc, Complete all as specified and directed by Engineer-in-Charge. |
| 69 | Supply and Fix in repairs 2 in 1 mixture valve of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed, Complete all as specified and directed by Engineer-in-Charge. |
| 70 | Supply and Fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long, Complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supply and Fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints ,125mm size ,including fixing to steel pipe or union, Complete all as specified and directed by Engineer-in-Charge. |
| 72 | Supply and Fix in repairs toilet paper holder of chromium plated fixed to walls with and including chromium plated brass screws, Complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply and Fix in repairs two way bib cock of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed, Complete all as specified and directed by Engineer-in-Charge. |
| 74 | Supply and Fix in repairs 1.2metre long chromium plated health faucet including holder fixed to wall, Complete all as specified and directed by Engineer-in-Charge. |
| 75 | Dismantaling water tanks exceeding 250 litres and not exceeding 500 litres, Complete all as specified and directed by Engineer-in-Charge. |
| 76 | Dismantaling water tanks exceeding 500 litres but not exceeding 1000 litres, Complete all as specified and directed by Engineer-in-Charge. |
| 77 | Supply and Fix 500 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered hoisted and fixed in position all as specified in SSR Part I, Complete all as specified and directed by Engineer-in-Charge. |
| 78 | Supply and Fix 1000 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered hoisted and fixed in position, Complete all as specified and directed by Engineer-in-Charge. |
| 79 | Taking out old chocked 20mm GI pipe and connections from trenches, walls, ceilings, floors etc, Complete all as specified and directed by Engineer-in-Charge. |
| 80 | All as per item No.79 above but 15 mm dia bore Complete all as specified and directed. |
| 81 | Supply and Fix 20mm bore GI tubing medium grade with and including necessary fittings complete to walls and ceilings or laid in floors of the following sizes, Complete all as specified and directed by Engineer-in-Charge. |
| 82 | All as per item No.81 above but 15 mm dia bore Complete all as specified and directed. |
| 83 | Material and Labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth as in stone / concrete block walls, Complete all as specified and directed by Engineer-in-Charge. |
| 84 | Supply and Fix in repairs PVC body box type cabinet mirror of size 450mm x 600mm, Complete all as specified and directed by Engineer-in-Charge. |
| 85 | Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc, including necessary pipe fittings, Complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply and Fix in repairs plastic water closet seat cover, white colour, soft closing type, with and including mild steel chromium plated or aluminium hinging device, Complete all as specified and directed by Engineer-in-Charge. |
| 87 | Taking down chowkats or frames (without taking of shutters from the frames) not exceeding 1.5 Sqm each, Complete all as specified and directed by Engineer-in-Charge. |
| 88 | Taking down shutter of size exceeding 1 Sqm but not exceeding 2 Sqm each, Complete all as specified and directed by Engineer-in-Charge. |
| 89 | Taking down chowkats or frames (without taking of shutters from the frame) exceeding 1.5sqm but not exceeding 4 sqm, Complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply and Fix factory made Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing, Complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply and Fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, Complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply and Fix extruded aluminium alloy handles, fabricated type anodised 125 mm size, Complete all as specified and directed by Engineer-in-Charge. |
| 93 | Supply and Fix 125 mm long aluminium anodised barrel tower bolts of extruded section, Complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply and Fix 100 mm long MS butt hinges medium weight cold rolled welded to steel frame / fixed to wooden and PVC frame with suitable screws, Complete all as specified and directed by Engineer-in-Charge. |
| 95 | Supply and Fix 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces, complete all as specified and directed by Engineer-in-Charge. |
| 96 | Supply and Fix factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, Complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply and Fix 30mm thick II class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) supplied and fitted to chowkats, Complete all as specified and directed by Engineer-in-Charge. |
| 98 | Material and Labour for preparation of new wooden surfaces of width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of pink primer, Complete all as specified and directed by Engineer-in-Charge. |
| 99 | Supply and Fix 300mm long aluminum alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section, Complete all as specified and directed by Engineer-in-Charge. |
| 100 | Supply and Fix extruded aluminium alloy handles, fabricated type anodised 150 mm size, Complete all as specified and directed by Engineer-in-Charge. |
| 101 | Supply and Fix 150 mm long aluminium anodised barrel tower bolts of extruded section, Complete all as specified and directed by Engineer-in-Charge. |
| 102 | Supply and Fix 125 mm long MS butt hinges medium weight cold rolled welded to steel frame / fixed to wooden and PVC frame with suitable screws, Complete all as specified and directed by Engineer-in-Charge. |
| 103 | Supply and fixing powder coated aluminium frames for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 104 | Supply and fixing powder coated of any colour Anodised aluminium window shutters, as in three track type without sash bars, aluminium sections weighing 0.55 kh/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangements complete all as specified and directed |
| 105 | Supply and fixing 4.0mm thick sheet glass glazing in aluminium window, ventilator shutters and partitions etc, (weight not less than 10Kg/ Sqm) including consumables complete all as specified and directed by Engr-in-Charge. |
| 106 | Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and directed by Engr-in-Charge. |
| 107 | M&L for Anodised aluminium ventilator shutters, fixed type without sash bar, for powder coating of any colour(Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, Complete all as specified and directed by Engineer-in-Charge. |
| 108 | Supply and Fix in repairs 20mm Dia stainless steel Gde 304 curtain rods complete all as specified and directed by Engineer-in-Charge. |
| 109 | Supply and Fix in repairs stainless steel fancy type brackets suitable for 25 mm dia curtain rods complete all as specified and directed by Engineer-in-Charge. |
| 110 | Dismantling wrought iron or mild steel work and elevated iron loft tank of any description not otherwise provided for, Complete all as specified and directed by Engineer-in-Charge. |
| 111 | Supply and Fix Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290 (Gd E -165), Complete all as specified and directed by Engineer-in-Charge. |
| 112 | Supply and Fix mild steel work such as grills, gratings, etc, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters:walk ways, railing, framed work of water tanks and similar work conforming to Fe 290 Gde E-165, Complete all as specified and directed by Engineer-in-Charge. |
| 113 | Preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, Complete all as specified and directed by Engineer-in-Charge. |
| 114 | Dismantling boarding of any description, fixed in any position, Complete all as specified and directed by Engineer-in-Charge. |
| 115 | Material and Labour for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work / steel frame, Complete all as specified and directed by Engineer-in-Charge. |
| 116 | Supply and Fix in repairs 40mm flaps (when open) continuous (piano) higes, mild steel, bright finish or electrogalvanised, Complete all as specified and directed by Engineer-in-Charge. |
| 117 | Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles, Complete all as specified and directed by Engineer-in-Charge. |
| 118 | Material and Labour for PCC block masonry with solid blocks, exc 10 cm in width and setting CM in 1:6 precast cement concrete block of type C-1 with 1:3:6 (using 20 mm graded stone aggregate), Complete all as specified and directed by Engineer-in-Charge. |
| 119 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, Complete all as specified and directed by Engineer-in-Charge. |
| 120 | Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using WPC, Complete all as specified and directed by Engineer-in-Charge. |
| 121 | Material and Labour for Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:6 , Complete all as specified and directed by Engineer-in-Charge. |
| 122 | Material and Labour for Rendering on ceiling, 5mm thick on fair faces of concrete surfaces in cement mortar 1:3, Complete all as specified and directed by Engineer-in-Charge. |
| 123 | Material and labour for prepartion of Newly plastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on walls all as per manufacturer instruction complete all as specified and directed by Engineer-in-charge. |
| 124 | Material and Labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over a coat of 3mm thcik wall care putty and a coat of primer, complete all as specified and directed by Engineer-in-Charge. |
| 125 | Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, Complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |