|
| 1 | fo|qr forj.k [k.M eksnhuxj ds vUrxZr 11@-04 ds0oh0 midsUnzksa fo|qr forj.k [k.M eksnhuxj ds vUrxZr 33@11 ds0oh0 fo|qr midsUnzksa] 11 o 33 ds0oh0 oh0lh0ch0] fLop;kMZ] fLopfx;j rFkk forj.k ifjorZdksa ls lacaf/kr lqn` |
| 2 | SAFE CARRIAGE OF S.T./PCC POLE FROM STORE CENTER TO SITE STORE WITH LOADING & UNLOADING AT BOTH ENDS RESPECTIVELY DISTANCE WITHIN- 0 TO 50 KMS. |
| 3 | 11 KV VCB 200/100/5 |
| 4 | 11 KV INC. VCB |
| 5 | 11 KV OUT. VCB |
| 6 | 33 KV VCB 800 AMP |
| 7 | 33 KV VCB BREAKER 800 AMP |
| 8 | 33 KV CONTROL PANEL FOR SINGLE TF |
| 9 | LT XLPE CABLE 1*240 SQ. MM. |
| 10 | LT XLPE CABLE 1*400 SQ. MM. |
| 11 | LT XLPE CABLE 1*630 SQ. MM. |
| 12 | BATTERY CHARGER 24 VOLT. |
| 13 | BATTERY SET 12 NO.*2 VOLT 200 AH |
| 14 | 33 KV BUS ISOLATOR 800 AMP (TPMO) |
| 15 | 11 KV 3X185 XLPE CABLE |
| 16 | LOADING, SAFE CARRIAGE & UNLOADING OF HEAVY STOCK MATERIAL V TYPE X ARM, DISC INSULATOR, PIN INSULATOR ETC. FROM STORE CENTER TO SITE STORE WITH PROPER STACKING OF MATERIAL, DISTANCE WITHIN-50 KMS. |
| 17 | CUTTING /DRILLING /WELDING OF MS ANGLE & CHANNEL. |
| 18 | LAYING OF 11 KV XLPE CABLE/LEAD OUTER SIZE NEWLY ERECTED POLE AS PER RESPO MANUAL AND AS PER DIRECTION OF SUPERVISING ENGINEER. IT INCLUDES THE COST OF LABOUR, T&P, CARRIER ETC. REQURIED FOR PROPER COMPLETION OF WORK. |
| 19 | 11 KV 3X185 XLPE CABLE |
| 20 | LT XLPE CABLE 1*240 SQ. MM. |
| 21 | LT XLPE CABLE 1*400 SQ. MM. |
| 22 | LT XLPE CABLE 1*630 SQ. MM. |
| 23 | WORK OF DELTA EARTHING (FOR 10 MVA POWER TF) INCLUDING COMPLETE INSTALLATION |
| 24 | WORK OF PLINTH REPAIRING (250/400 KVA ) |
| 25 | WORK OF DT NEW FENCING (250/400 KVA ) |
| 26 | WORK OF PIPE EARTHING (INC. INSTALLATION) |
| 27 | WORK OF PLINTH REPAIR (FOR POWER TF) |
| 28 | WORK OF 11 KV EF & OC PROTECTION ELECTRONIC RELAY (C&S MAKE) |
| 29 | CONSTRUCTION OF PLINTH FOR VCB. |
| 30 | MAKING JUMPERS ON SECTION POINTS, BY FIXING OF PROPER SIZES, SUITABLE FOR ACSR CONDUCTOR. SECTIONAL DOUBLE/FOUR POLE. |
| 31 | MAKING/FILLING OF 11 KV CABLE JOINTING KIT 3*70 SQ MM. XLPE CABLE. |
| 32 | THE FOLLWING MATERIAL WILL BE FIXED BY THE CONTRACTOR. |
| 33 | FIXING OF 33 KV BUS ISOLATOR 800 AMP (TPMO) |
| 34 | 11 KV VCB 200/100/5 |
| 35 | 11 KV INC. VCB |
| 36 | 11 KV OUT. VCB |
| 37 | 33 KV VCB 800 AMP |
| 38 | 33 KV VCB BREAKER 800 AMP |
| 39 | 33 KV CONTROL PANEL FOR SINGLE TF |
| 40 | CHEMICLE EARTHING ELECTROD ROD. |
| 41 | CONTROL CABLE 4X2.5MM SQ |
| 42 | 11 KV PIN INSULATOR. |
| 43 | FIXING OF CHEMICAL EARTHING |
| 44 | FIXING OF LT ALU. LUG 240 SQ. MM. |
| 45 | FIXING OF LT ALU. LUG 400 SQ. MM. |
| 46 | FIXING OF ALU. CRUMPING LUG 1*240 |
| 47 | FIXING OF ALU. CRUMPING LUG 1*400 |
| 48 | FIXING OF ALU. CRUMPING LUG 1*600 |
| 49 | FIXING OF WTI (POWER TF) PROVIDING ONLY |
| 50 | FIXING OF OTI (POWER TF) PROVIDING ONLY |
| 51 | PROVIDING OF MCCB 630 AMP. WITH BOX. |
| 52 | FIXING OF 11 KV EF & OC PROTECTION ELECTRONIC RELAY (C&S MAKE) |
| 53 | FIXING OF 33 KV PG CLAMP |
| 54 | FIXING OF CLAMP WITH NUT & BOLT |
| 55 | THE FOLLWING MATERIAL WILL BE PROVIDED BY THE CONTRACTOR. |
| 56 | CHEMICLE EARTHING ELECTROD ROD. |
| 57 | CONTROL CABLE 4X2.5MM SQ |
| 58 | PIPE EARTHING (INC. INSTALLATION) |
| 59 | PROVIDING, FABRICATING CARRYING & FIXING OF TAILLESS FUSE UNIT HOOK TYPE ARRANGEMENT, CIRCUIT HAVING 3 PHASE + NEUTRAL ARRANGEMENT IN BOX / FRAME MADE OF 65CMX65CMX6MM FRAME MS ANGLE WITH HEAVY DUTY ALUMINIUM LUGS SUITABLE FOR 500 AMP LOAD ON AT LEAST 2 FT HEIGHT FROM GROUND ON PLINTH FOR SAFE INSTALLATION OR FIXING OF TAILNESS UNIT AT MS ANGLE FRAME ON PLINTH HORIZONTIALLY/VERTICALLY AS PER SITE REQUIREMENT ON AVAILABLE PLINTH AT SAFE HEIGHT AS PER SITE CONDITIONS FOR ELECTRICAL SAFETY WITH MAKING THE CONNECTION AT(160 KVA-250 KVA) T/F AND LINE SIDE COMPLETE. |
| 60 | PROVIDING, FABRICATING CARRYING & FIXING OF TAILLESS FUSE UNIT HOOK TYPE ARRANGEMENT, CIRCUIT HAVING 3 PHASE + NEUTRAL ARRANGEMENT IN BOX / FRAME MADE OF 65CMX65CMX6MM FRAME MS ANGLE WITH HEAVY DUTY ALUMINIUM LUGS SUITABLE FOR 500 AMP LOAD ON AT LEAST 2 FT HEIGHT FROM GROUND ON PLINTH FOR SAFE INSTALLATION OR FIXING OF TAILNESS UNIT AT MS ANGLE FRAME ON PLINTH HORIZONTIALLY/VERTICALLY AS PER SITE REQUIREMENT ON AVAILABLE PLINTH AT SAFE HEIGHT AS PER SITE CONDITIONS FOR ELECTRICAL SAFETY WITH MAKING THE CONNECTION AT(160 KVA-250 KVA) T/F AND LINE SIDE COMPLETE. |
| 61 | PROVIDING, FABRICATING CARRYING & FIXING OF TAILLESS FUSE UNIT HOOK TYPE ARRANGEMENT , CIRCUIT HAVING 3 PHASE + NEUTRAL ARRANGEMENT IN BOX / FRAME MADE OF 65CMX65CMX6MM FRAME MS ANGLE WITH HEAVY DUTY ALUMINIUM LUGS SUITABLE FOR 500 AMP LOAD ON AT LEAST 2 FT HEIGHT FROM GROUND ON PLINTH FOR SAFE INSTALLATION OR FIXING OF TAILNESS UNIT AT MS ANGLE FRAME ON PLINTH HORIZONTIALLY/VERTICALLY AS PER SITE REQUIREMENT ON AVAILABLE PLINTH AT SAFE HEIGHT AS PER SITE CONDITIONS FOR ELECTRICAL SAFETY WITH MAKING THE CONNECTION AT(400 KVA) T/F AND LINE SIDE COMPLETE. |
| 62 | PROVIDING, FABRICATING CARRYING & FIXING OF TAILLESS FUSE UNIT HOOK TYPE ARRANGEMENT , CIRCUIT HAVING 3 PHASE + NEUTRAL ARRANGEMENT IN BOX / FRAME MADE OF 65CMX65CMX6MM FRAME MS ANGLE WITH HEAVY DUTY ALUMINIUM LUGS SUITABLE FOR 500 AMP LOAD ON AT LEAST 2 FT HEIGHT FROM GROUND ON PLINTH FOR SAFE INSTALLATION OR FIXING OF TAILNESS UNIT AT MS ANGLE FRAME ON PLINTH HORIZONTIALLY/VERTICALLY AS PER SITE REQUIREMENT ON AVAILABLE PLINTH AT SAFE HEIGHT AS PER SITE CONDITIONS FOR ELECTRICAL SAFETY WITH MAKING THE CONNECTION AT(400 KVA) T/F AND LINE SIDE COMPLETE. |
| 63 | PROVIDING LT ALU. LUG 240 SQ. MM. |
| 64 | PROVIDING LT ALU. LUG 400 SQ. MM. |
| 65 | PROVIDING ALU. CRUMPING LUG 1*240 |
| 66 | PROVIDING ALU. CRUMPING LUG 1*400 |
| 67 | PROVIDING ALU. CRUMPING LUG 1*600 |
| 68 | PROVIDING WTI (POWER TF) PROVIDING ONLY |
| 69 | PROVIDING OTI (POWER TF) PROVIDING ONLY |
| 70 | PROVIDING 33 KV PG CLAMP |
| 71 | PROVIDING OF MCCB 630 AMP. WITH BOX. |
| 72 | PROVIDING CLAMP WITH NUT & BOLT |
| 73 | DISMANTLING & REMOVAL OF OLD & USED MATERIALS . |
| 74 | 11 KV VCB OLD & DAMAGE |
| 75 | VCB SCRAP |
| 76 | LT LEAD SCRAP |
| 77 | OLD & DAMAGE BATTERY CHARGER WITH BATTERY SET |
| 78 | MS SCRAP |
| 79 | DAMAGE DOG CONDUCTOR SCRAP |
| 80 | CARTAGE OF OLD & USED RECEIVED BACK MATERIAL FROM SITE TO STORE CENTRE/ J.E. STORE. |
| 81 | 11 KV VCB OLD & DAMAGE |
| 82 | VCB SCRAP |
| 83 | LT LEAD SCRAP |
| 84 | OLD & DAMAGE BATTERY CHARGER WITH BATTERY SET |
| 85 | MS SCRAP |
| 86 | DAMAGE DOG CONDUCTOR SCRAP Please Enable Macros to View BoQ information |