|
| 1 | Plain cement concrete 1:4:8 mix (One cement four m sand and Eight metal) using 40mm ISS hard broken granite stone jelly for foundation and flooring including dewatering wherever necessary and laid in layers of not exceeding 15cm thick to required thickness including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification (TNDSS No. 23, 28, VI(3.51) 4.2, 4.3) |
| 2 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 3 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 4 | Plastering with cement mortar 1:5 mix (One cement and Five sand) 12 mm thick Over Brick wall including cost of materials to site etc., complete as per standard specification |
| 5 | Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 6 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 7 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work |
| 8 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 9 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 10 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 11 | Painting two coats over old iron work including Cost of paint cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification |
| 12 | Supplying and fixing of PVC water tank including cost of tank conveying fixing with inlet, outlet and scour connection etc., complete as per standard specification |
| 13 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 14 | Supply, erection, testing and commissioning of cast iron body and gun metal or stainless steel Internal Non-Return Valve of size of 80mm dia to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 15 | Supply erection of Power Used: 40WU.V Tubes:2, Open Area: 300 sq.ft ,Closed Area: 400 Sq.ft,Dimension: 25” X 5″ X 12″ Fly insect killer machine assists to attracts mosquitoes and flies towards a system that works on decoy principle. The electronic insect killer light has been fitted with high voltage wires near tube-light which instantly kill insects. |
| 16 | Supply of Stainless steel various size of vessels for kitchen purpose including all cost and conveyance of all material and transport labour charges etc., complete as per standard specification (LR). |
| 17 | R.N.Pudhur Amma unavagam |
| 18 | PANAI 10 SAAL SS (MKS) 1.35 |
| 19 | STAINLESS STEEL UTENSILSS SS OIL TOOK |
| 20 | STAINLESS STEEL UTENSILSS 22,23 SIZE 18G HEAVY VANA + MOODI-1SET |
| 21 | B.P.Agraharam Amma unavagam and Karugalpalayam Amma unavagam |
| 22 | HOTBOX 30 LT JUMBO SS (MAHA) |
| 23 | ALUMINIUM UTENSILS COOKER HEAVY BIG - 4 LT |
| 24 | STORAGE DRUM FOR RICE OR DHAL |
| 25 | PIPE FITTING CHARGES TAP + FITTING |
| 26 | STOOL HEAVY SS |
| 27 | IDLY PANAI BIG AND HEAVY |
| 28 | BUCKET 16 REG ALUM |
| 29 | BUCKET 12 REG ALUM |
| 30 | MUG REVIT 4 SS |
| 31 | MUG REVIT 5 SS |
| 32 | CHINESE LADDLE 4.0 HVY WOOD (AMA) |
| 33 | CHINESE LADDLE 5.0 HVY WOOD (AMA) |
| 34 | JUG 6 22G PLAIN SS(KU) |
| 35 | BUKET 10 SS(RR) |
| 36 | KAAIVADI 8 REG SS 1000 |
| 37 | TUMBLER 6.0 26G RAMPATRA SS (DD) |
| 38 | MOTTAA KINNAM SS(KI) 5- INCH |
| 39 | DABBA 7 - 9 SEE THROO JOINTLESS SS (DS) |
| 40 | DABBA 10 - 14 JOINTLESS SS (LAM) |
| 41 | KAAISEEVAL 3 QUEEN BOX SS (AMA) |
| 42 | OGARALA 5.5 LADDLE SS (KKA) |
| 43 | DONGA 4 PIPE HANDLE VAGRALA SS (AMA) |
| 44 | KURUPI 39 - 42 PIPE SS (TRY) |
| 45 | KNIFE 3COMBO 1235.2 C1 (KOH) |
| 46 | ANDA JUMBO 22G SS (MUT) 17,18,19,20 - INCH |
| 47 | DAVARA ALUM 12 - 36 FLAT PRAK |
| 48 | ARUVAMANAI HEAVY IRON 1.500 (BMI) |
| 49 | KADAI 15 PLAIN ALUM (RME) |
| 50 | ANNAKUDAI WELDING SPL 1.100 SS (RR) |
| 51 | MAYIR KOTHI SINGLE SS (JM) |
| 52 | LIGHTER 18 SS (MLA) |
| 53 | STAND SPOON 2 MPS SHREEPAL SS (MHA) |
| 54 | SPOON BABY 14G IMPRESS (CL) |
| 55 | ADUKU MYSORE SS (AN) |
| 56 | ANDA HALF 18G SS (MUT) |
| 57 | LADDLE PATTAI EX.LENGTH SS (TRY) |
| 58 | LADDLE 0 PATTAI SS (TRY) |
| 59 | SUPREMO LONG SPOON 3 SS (SHT) |
| 60 | TUMBLER 5.0 22G RAMPATRA SS (DD) |
| 61 | BABY MUG 1TO 4 SS (SWC) |
| 62 | ZARA 7 HOLES ARISTO (MU) |
| 63 | SOMBU 2 MORSOMBU SS (DSH) |
| 64 | SOMBU 1 TIRUPUR SS (MKS) |
| 65 | ROUND BOJAN PLATE 12 SS (KU) |
| 66 | TRAY HALWA SS (RR) |
| 67 | ALUMINIUM UTENSILS |
| 68 | BUCKET 7 SS (RR) |
| 69 | TRAY LASANIA 4 SS (RU) |
| 70 | OVAL BEEDING DISH 1 SS (KU) |
| 71 | Supply of indalium metal various size of vessels for kitchen purpose including all cost and conveyance of all material and transport labour charges etc., complete as per standard specification (LR). Please Enable Macros to View BoQ information |