|
| 1 | M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) with and including WPC(water proofing compound) @ 3% per 50 kg of cement including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and directed. Note :- WPC shall not be paid separately for this item. |
| 2 | M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) with and including WPC(water proofing compound) @ 3% per 50 kg of cement newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed .Note :- WPC shall not be paid separately for this item. |
| 3 | M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and directed |
| 4 | M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed |
| 5 | M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished including taking down plaster the surface even and smooth without using extra cement and necessary scaffolding complete all as spd and directed |
| 6 | M&L for Vitrified double charged coloured ceramic tiles light shade 8 mm thick (rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including M&L for 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and hearting complete all as specified and directed. |
| 7 | All as per serial item 6 as above but as in vertical surfaces including dismantling of tiles over and including M&L for rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified. |
| 8 | M&L for Vitrified coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.36 sqm and not exc 0.42 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including M&L for 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and hearting complete all as specified and directed. |
| 9 | All as per serial item as above but as in vertical surfaces including dismantling of tiles over and including M&L for rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified. |
| 10 | M & L for non- skid ceremic coloured tiles 7mm to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of tiles over and including screed bed or bedding layer of mortar M&L for 15mm thick in cement mortar 1:6 for laying floor finishes all as specified. |
| 11 | M&L 25mm thick cement concrete type B1 1:2:4 using 20mm graded stone aggregate in levelling course complete all as spcified and as directed. |
| 12 | M&L for Glazed (plain /coloured) ceramic tiles wall 600mmx300mmx7mm thick on vertical faces of walls over and including M&L for 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified. |
| 13 | M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed. |
| 14 | M & L for Post Construction Anti TermiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed. |
| 15 | Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed. |
| 16 | Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 Sqm each and not exc. 4.00 Sqm including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed. |
| 17 | S & F Solid Prelam WPC solid Door Frame of size 105mm x 65 mm, density more than 0.95, moulded preleminated fixing at opening with screw of size 100 mm long 5 mm dia pling & fixing in opening as per specification and directed Note : Colour to be deceided by GE |
| 18 | S&F 30 mm thick solid core one WPC Modular door, one side Prelam and other side plain fixed in the frame at site as per specification & drawing. |
| 19 | S&F for 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface all as specified and directed. |
| 20 | S&F for 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surface complete all as spd and directed. |
| 21 | S&F for 30 mm thick Factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed. |
| 22 | M & L for 35mm thick Factory made plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed. Note:- Capsule Mesh will be measured and paid separately. |
| 23 | S&F for 1.2 mm thick aluminum anodised capsule mesh aperture not more than 1 cm fixing with screw in the door for protection of mosquito wire mesh and all as spd and directed. |
| 24 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specifed and directed. |
| 25 | S&F powder coated aluminium frame for windows, ventilators and kitchen cupboards frame size 100mmx44mm and 2mm thick with one or more rebates including joining cleat for fixing etc and add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified. |
| 26 | S&F for powder coated aluminium Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.Note : Cost of rubber beading and required accessories shall be included in the rate of item and will not be paid extra. |
| 27 | S&F of 4 mm thick frosted glass, cut to shape and size n exc. 0.50 sqm in each pane fixed in aluminium frame or louver complete all as specified and as directed |
| 28 | S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick figured glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below- (i) Window frame :90mmx38mm X 2.0 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15mmx37.5mmx1.50 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
| 29 | S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick figured glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below- (i) Window frame :90mmx38mm X 2.0 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15mmx37.5mmx1.50 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
