|
| 1 | Dismantling water tanks of capacity exc 500 ltrs but n. exc 1000 ltrs complete all as specified and directed. |
| 2 | S&F 1000 litre rotational moulded polyethylene water storage tanks (ISI Mark) (cylindrical vertical with closed top & double layered) hoisted and fixed in position. |
| 3 | S&F in repairs 20 mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe complee all as specified and directed. |
| 4 | S&F in repairs 25 mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe complee all as specified and directed. |
| 5 | S&F in repairs 20 mm Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe |
| 6 | Taking up or down 15 mm GI tubes galvanized iron and connections and removing/shifting from site including cleaning where directed complete all as specifed and directed. |
| 7 | Re-fixing only 15 mm GI tubes galvanized iron and connections fixed to walls or laid in floor and jointing with new fittings such as socket, bends, elbows nipple, union etc all as specified and directed complete all as specified and directed. |
| 8 | S&F for 15 mm GI tubes medium grade, galvanized with all fittings fixed to walls, ceiling and laid in floor, to be concealed wherever directed. |
| 9 | Taking up or down 20 mm GI tubes galvanized iron and connections and removing/shifting from site including cleaning where directed complete all as specifed and directed. |
| 10 | Re-fixing only 20 mm GI tubes galvanized iron and connections fixed to walls or laid in floor, fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed. |
| 11 | S&F for 20 mm GI tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed. |
| 12 | Taking down MS window/ventilators/Door frames with shutters of any size and any description, making good soffits, jambs, cills etc to receive new window/ventilators frame complete all as specified and as directed.Note: Any damage during dismantiling of window, the same shall be made good by contractor without any financial effect. |
| 13 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm (moulded) single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specifed and directed. |
| 14 | M&L for factory made single extruded WPC (Wood Polymer Composite) Prelaminated solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws and included of SS butt hinges of 125 mm size, 150 mm SS handle, 250mm SS sliding door bolt, 200mm SS tower bolt, all as specifed and directed. |
| 15 | S&F powder coated of powder coating 50 micron aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 4.80 mm thick figured glass & stainless wire mesh fixed with neoprene rubber gasket with aluminium beading ,clips,frame made with aluminium section as appended below- (i) Window frame 92x38x2.00mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 20x39x2.00mm thick and over. (iii)Aluminium beading -0.7mm thick. (iv)Stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size. (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. Note : Rate for glass and wire shall not be paid separately. |
| 16 | S&F Power coated coloured aluminium door shutter comprising the frame of size 101.60x44.75x2.40mm thick, size of styles, top rail and lock rail 100x45x2mm thick, bottom rail 150x44.50x2.40mm thick including all necessary jointing cleats, rubber packing, power coated coloured aluminium beading for fixing glass pane and including 5 mm thick tinted/frosted/ACP sheet as per direction in both panel, hinges, hydrolic door closer, mortice lock, stays door stopprs and aluminium fancy type handles of size 150 mm etc complete all as specified and as directed. |
| 17 | S&F for powder coated aluminium ventilator shutters with frame not less than 0.35 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. |
| 18 | Dismantling wrought iron or mild any description such as steel gate, steel frame works, purlins, rafter, railings, balusters and window guard bars and directed. |
| 19 | S&F framed work as in grill, doors or gates of angle or other section with gusset plates, braces,etc. complete, drilled for fixing of steel sheeting or other coverings, doors etc to be prepared for hanging or sliding with and inlcluding either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing Fe 410W (Gde E-250) complete as specified and directed including applying two coats of synthetic enaml paint over a coat of primer. |
| 20 | S&F for steel work as in tabular trusses/supproting pipes etc complete using ERW or induction butt welded tubes conforming to IS: 1161-1979 grade St-240. |
| 21 | Dismantling Plain or corrugated steel sheeting of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 22 | S&F Prepainted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 mPa as in roof covering/cladding to wall, fixed with self tapping screw including filling gap between wall face and sheet if any shall be sealed using CM 1:3 with WPC complete all as specified and as directed |
| 23 | S&F Prepainted Galvalume aluminium zinc coating GI based Plain sheet 0.50 mm thick of any colour having tensile strength 550 mPa as in roof covering/cladding to wall, fixed with self tapping screw and as in ridges, hips, valley gutter, drip and straight flashing complete all as specified directed. |
| 24 | Excavation in post holes (or similar holes) each n exc 0.5 cum in hard /dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete. |
| 25 | M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate ) in foundation for post holes. |
| 26 | M&L for moorum/red bajri filling in floors or pavings, laid in double layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 27 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of flooring/hard standing and including demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for and romoving the debris out of MOD Land. Please Enable Macros to View BoQ information |
| 28 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of flooring/hard standing and including demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for and romoving the debris out of MOD Land. Please Enable Macros to View BoQ information |