|
| 1 | Part A (Materials Provided by contractor) Sub-Station Nausarh |
| 2 | 33 KV Ploymer Pin insulators |
| 3 | PG Clamp Dog to Dog Conductor |
| 4 | PG Clamp Panther to Dog Conductor |
| 5 | Cable Jointing Kit 3×300 mm outdoor |
| 6 | Cable Jointing Kit 3×300 mm indoor |
| 7 | Cable Jointing Kit 3×185 mm outdoor |
| 8 | Cable Jointing Kit 3×185 mm indoor |
| 9 | MS Dropper Channel |
| 10 | G I Pipe 6'' Dia |
| 11 | 11 KV Disc Insulator B&S Polymeric Type |
| 12 | 11 KV Disc Fitting |
| 13 | PG Clamp weasel to weasel |
| 14 | Number Plate with clamp and Nut & Bolt |
| 15 | Danger Board with clamp and Nut & Bolt |
| 16 | Barbered Wire |
| 17 | Nut Bolt and washer all sizes |
| 18 | Stay set complete |
| 19 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 20 | Holding Clamp for GI Pipe |
| 21 | Holding Clamp for cable |
| 22 | Holding Clamp for Top, Droper |
| 23 | Lug for ACSR Dog Conductor |
| 24 | L.T.P.V.C. Cable 3½×70 mm2 |
| 25 | Terminal Gantry |
| 26 | Bus Bar complete with structure and required all materials (acsr panther conductor, insulator and pg clamps etc) |
| 27 | Cable Stand with MS Channel |
| 28 | L Type Structure for Neutral Stand |
| 29 | 24 Volt Battery & Battery Charger/Inverter with cabinet |
| 30 | Armoured Cu. Control Cable 2×2.5 mm2 |
| 31 | Armoured Cu. Control Cable 4×2.5 mm2 |
| 32 | 11 KV T.P. M.O. Switch with fixing clamps |
| 33 | 11 KV Fuse set with fixing clamps. |
| 34 | T&P of Substation switchgears(Hand Gloves-05 Set,Safety Helmets-5 Set, Safety Belts-4 Set, Tool Kit Box-1No,Pliers-05 Nos, Meggar-1 No, Multimeter-1 No,earth chain,Ladder,Discharge Rod up to 33 kv-3 No.) |
| 35 | Rubber Mat |
| 36 | Fire Fighting equipments including 02 no 10 kg,02 Nos. 4.5 Kg. CO2 Fire Extinguisher potable type and 02 Nos. machenical Foam type Fire Extinguisher potable type |
| 37 | Fire Bucket with sand and stand |
| 38 | Substation Furniture (4–fiber Chairs,2-wooden chair,1- revolving chair, 2–Table with drawer, 2–Bench, 1–Chauki, 2–Stool) |
| 39 | Sundry items |
| 40 | Part -B – WORKShifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site |
| 41 | ACSR Dog Conductor |
| 42 | 11 KV XLPE Cable3×300 mm2 |
| 43 | 11 KV XLPE Cable3×185 mm2 |
| 44 | ST Pole 11 M long |
| 45 | PCC Pole 8.5 M Long |
| 46 | 33 KV line Isolator |
| 47 | Structure for line Isolator |
| 48 | 33 KV Bus Isolator |
| 49 | Structure for Bus Isolator |
| 50 | 33 KV post insulators |
| 51 | Structure for Post Insulator |
| 52 | 33 KV C.T |
| 53 | C.T Structure |
| 54 | 33 KV PT(Outdoor) |
| 55 | PT Structure |
| 56 | 33 KV Fuse Set |
| 57 | Fuse Set Structure |
| 58 | 33 KV Lightning Arrestors |
| 59 | LA Structure |
| 60 | 33 KV VCB 800A, 750 MVA with Structure |
| 61 | 33 KV Control Panel for Single T/F |
| 62 | 33KV Control Pannel for single feeder |
| 63 | 5 MVA Transformer 33/11 KV |
| 64 | 90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr. @ Rs. 22.10 Per Kg. |
| 65 | 11 KV VCB (Incoming) 600/300/5A 350 MVA |
| 66 | 11 KV VCB (Out going) 200/100/5A 350 MVA |
| 67 | 11 KV Bus Coupler |
| 68 | 11 KV Top channel |
| 69 | 63 KVA 11/0.4 KV Transformer |
| 70 | Erection, grouting,painting of following fabricated structures as per RESSPO Drawing. |
| 71 | 33 KV Bus bar Gantry |
| 72 | 33 KV Terminal Gantry |
| 73 | 33 KV Isolator structure |
| 74 | 33 KV L.A. structure |
| 75 | 33 KV Post insulator structure |
| 76 | 33 KV fuse set structure |
| 77 | 33KV C.T. structure |
| 78 | 33KV P.T. structure |
| 79 | 33 KV VCB Structure |
| 80 | Insttalation, mounting and fitting of equipment on erected structures as per RESSPO Drawing. |
| 81 | 33 KV Line isolator complete |
| 82 | 33 KV Bus isolator complete |
| 83 | 33 KV L.A. |
| 84 | 33 KV Post insulator complete |
| 85 | 33 KV fuse set |
| 86 | 33KV C.T. |
| 87 | 33KV P.T. |
| 88 | 33 KV VCB |
| 89 | Construction of power transformer plinth for 05 MVA transformer of size 3.5 x 3.5 x 0.5 mtr or as per site requirement. including cost of all material as per requirement. |
| 90 | Transformer body earthing complete including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type) |
| 91 | Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type) |
| 92 | Indoor Equipment earthing (11 kv pannels) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type) both delta earthing will be connected with 32mm round bar |
| 93 | Separate earthing of Indoor Equipment (33 kv control pannel) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type) |
| 94 | Special earthing of LA including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type) |
| 95 | Providing and Making of Outdor Earthing (Eartmat) as per UPPCL Norms. |
| 96 | Laying of 11 KV “XLPE” cable 3 x 185/300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable or laying in cable trench and covering with brick and sand as per site requirement. |
| 97 | Rising of cable on DP with GI Pipe 6\\" dia 3mtr long for cable safety. |
| 98 | Providing and erection of Special pipe earthing for cable protection. |
| 99 | Stringing of Terminal gantry and Making all Jumpers with provided all required material.complete work. |
| 100 | Stringing of 33 KV Bus Bar and Making all Jumpers in Switchyard with provided all required material .complete work |
| 101 | Providing & grouting of Neutral stand with all required materials. |
| 102 | Providing & Grouting of cable stand and fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers. |
| 103 | Writing name on S/S Building 11 KV Switchgear panels & all equipments insatalled in control room & switchyard. |
| 104 | Jointing charges of 11 KV “XLPE” C/J kit 3 x185/300 mm2 indoor/outdoor. |
| 105 | Installation and connection of 63 KVA T/F with all accessories |
| 106 | Fitting & Fixing of TPMO and Fuse set on erected 11 KV D/P. |
| 107 | Making of control cable trench with cover and hanger by providing all required materials. as per site requirement. |
| 108 | Laying from switchyard to control room for 33 KV panel, CT, VCB, 5 MVA t/F by digging trench and making connection complete. (As per site requirement laying of cable though cable trench if available with covering brick and sand. |
| 109 | 2 x 2.5 mm2 |
| 110 | 4 x 2.5 mm2 |
| 111 | Providing and writing of Sub-Station Name & Arrow shine Board Complete. |
| 112 | Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly. |
| 113 | Electrical connection of 11 KV switchgear panel and fitting of Bus Bar. |
| 114 | Construction of SSO's approached road 1.5 Mtr. wide in Switchyard by laying dry sand and interlocking bricks The work include proper plastering top & side of road and leveling & dressing of earth beneath the brick work on edge. |
| 115 | Laying of LT cable 3.5x70 sqmm |
| 116 | Outdoor switch yard & approch road colony lighting with Provide 06 no. street light pole,150 watt LED light and all required materials |
| 117 | Installation of 33 KV control panel for “VCB” with complete earthing and connection of battery and battery charger/inverter in control room and making all protection equipment connection. |
| 118 | installation & Concreting of Stay set complete |
| 119 | Filling of sand in cable trench in the Switch Gear Room. |
| 120 | Installation of 24 V Battery & Battery Charge/ Inverter with cabinet |
| 121 | Erection, grouting, muffing and painting of 2 Nos. ST Poles 11m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect. |
| 122 | Erection, grouting of 2 Nos. PCC Poles 8.5 m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect. |
| 123 | Construction of Fire Wall between Transformers with all required material. |
| 124 | Providing of Misc. Items i.e. all type register ,Single Line Diagram ,Shut Down/Breakdown Name Board, Writing name on Substation Building,name of feedar & switchgear |
| 125 | Testing & commissioning charges of Substation. |
| 126 | Part A (Materials Provided by contractor) 33 KV Line Nausarh |
| 127 | PG Clamp Panther to Dog Conductor |
| 128 | 33 KV Cable Jointing Kit 3×300 mm outdoor |
| 129 | 33 KV Cable Jointing Kit 3×300 mm Straight Through |
| 130 | 33 KV Dropper Channel |
| 131 | G I Pipe 6'‘ Dia |
| 132 | Number Plate with clamp and Nut & Bolt |
| 133 | Danger Board with clamp and Nut & Bolt |
| 134 | Barbered Wire |
| 135 | Alluminium Paint |
| 136 | Red Oxide Paint |
| 137 | Nut Bolt and washer all sizes |
| 138 | Earthing of Pole. |
| 139 | Holding Clamp for GI Pipe |
| 140 | Holding Clamp for cable |
| 141 | Holding Clamp for Top, Droper |
| 142 | Lug for ACSR Dog Conductor |
| 143 | Part -B – WORKShifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site for 33/11 KV S/S Nausad |
| 144 | ACSR Dog conductor |
| 145 | ST Pole 9 m |
| 146 | 33KV Top channel |
| 147 | 33 KV ‘XLPE’ Cable 3x300mm² |
| 148 | Erection of Double pole on 9 Mtr ST Pole for only 33 kv cable rising including all works of evocation of pit, pole erection, pole Grouting & Plinthing as per RESPO Norms, fitting of all accessories (M.S. Dropper with clamps, top channel 100 x 50 x 2240 mm with clamps, Number plate, danger board with clamp, barbed wire, Painting, earthing etc. complete work). |
| 149 | Laying of 33 KV 3x300 mm² ‘XLPE’ cable by HDD mathod OR laying along with cast of digging, bricks & sand. As per site requirement |
| 150 | Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor. |
| 151 | Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Straight Through |
| 152 | Labour charges for Looping & Rising of 33 KV cable in 6” dia GI Pipe 3M Long and jumpering. complete work |
| 153 | Special pipe earthing for cable and kit protection with material. complete work |
| 154 | Part A (Materials Provided by contractor) 04 Nos. 11 KV Line |
| 155 | PG Clamp Dog to Dog Conductor |
| 156 | 11 KV Cable Jointing Kit 3×185 mm outdoor |
| 157 | 11 KV Cable Jointing Kit 3×185 mm Straight Through |
| 158 | 11 KV Dropper Channel |
| 159 | G I Pipe 6'‘ Dia |
| 160 | 11 KV Disc Insulator B&S Polymeric Type |
| 161 | 11 KV Disc Fitting |
| 162 | Number Plate with clamp and Nut & Bolt |
| 163 | Danger Board with clamp and Nut & Bolt |
| 164 | Barbered Wire |
| 165 | Alluminium Paint |
| 166 | Red Oxide Paint |
| 167 | Nut Bolt and washer all sizes |
| 168 | Stay Set Complete |
| 169 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 170 | Holding Clamp for GI Pipe |
| 171 | Holding Clamp for cable |
| 172 | Holding Clamp for Top, Droper |
| 173 | Lug for ACSR Dog Conductor |
| 174 | Part -B – WORKShifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site |
| 175 | ST Pole 11 M long |
| 176 | PCC Pole 8.5 M long |
| 177 | ACSR Dog conductor |
| 178 | 11 KV TOP Channel |
| 179 | 11 KV ‘XLPE’ Cable 3x185 mm² |
| 180 | Erection of Double pole on 11 Mtr ST Pole for 11 kv one side O/H and One side U/G Line including all works of evocation of pit, pole erection,pole grouting & plinthing as per RESPO norms, fitting of all accessories (M.S. Dropper with clamps, top channel 100 x 50 x 2240 mm with clamps, Number plate,danger board with clamp, Aluminium paint, red oxide paint, barbed wire, earthing,Painting etc. complete work). |
| 181 | Erection of Double pole on 8.5 Mtr ST Pole for only 11 kv cable rising including all works of evocation of pit, pole erection, pole Grouting as per RESPO Norms, fitting of all accessories (M.S. Dropper with clamps, top channel 100 x 50 x 2240 mm with clamps, Number Plate, danger board with clamp, barbed wire earthing etc. complete work). |
| 182 | Laying of 11 KV 3x185 mm² ‘XLPE’ cable by HDD mathod OR Laying along with cast of digging, bricks & sand OR Cable Tranch. As per site requirement |
| 183 | Jointing charge of 11 KV ‘XLPE’ C/J Kit 3x185 mm² Outdoor/Straight through |
| 184 | Labour Charges for Looping & Rising of 11 KV ‘XLPE’ cable in 6” dia GI. pipe 3m long Complete work. |
| 185 | Special Pipe earthing for 11 KV Jointing Kit with material. complete work |
| 186 | There will be possible of breaking of various type of water supply pipe while laying of U/G cable, for which the repair will be charged. (Include complete materials and work) |
| 187 | Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing. Please Enable Macros to View BoQ information |