|
| 1 | Supplying and fixing 240/415 V SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make- Legrand/ L&T/ ABB/ Schneider) |
| 2 | i) 6-32A SP |
| 3 | Supply & Fixing 240 V, 3 nos. 6 A, & 1no 16A 3 pin Modular type plug socket with 3 nos. 6A Modular type switch & 1 no. 16A Modular type switch (Brand approvedby EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 4 | Supply & Fixing 240 V, 2nos 6 A, 5 pin Modular type plugsocket (Brand approved by EIC) with 2nos. 6A Modular typeswitch, without plug top on 6 Module GI Modular type switch board with top cover plate flushed on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 5 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 6 | Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.. |
| 7 | Supply & Fixing 240 V, 25 A, Modular type AC starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 8 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required |
| 9 | 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 10 | 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 11 | 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC |
| 12 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 13 | 2.5 sqmm |
| 14 | 4 sqmm |
| 15 | Supply & delivery of Hi- Wall inverter type Split Air having following specification- Cooling capacity (Kcal/Hr)- 4500 Kcal/ Hr (1.5 TR) ISEER rating- 3 Star or above as per BEE/ BIS IS compliance- IS 1391 Refrigerant- R32/ R410A Compressor- Rotary/ Scroll Evaporator & Condenser Coil- Copper Operating ambient temperature- 50 degree centigrade Power Supply- 240V, 50 Hz (Tolerance as per applicable standard ) (Make- Mitsubishi Electric/ Mitsubishi Heavy Industries/ O- General/ Hitachi). |
| 16 | Installation , testing & Commissioning of 1.5 ton AC Machines complete with outdoor condensing unit on iron angle/ powder coated bracket & indoor cooling unit on wall with suitable bracket. Rate is incllusive of cutting of wall for making holes and mending good the damages. |
| 17 | Supply and drawing 5/8\\" & 3/8\\" copper refrigerant pipes with 9 mm thick rubber nitrile rubber insulation an Al foil tape complete fittings Elbows, Bends, Supporting arrangement on walls along with other accessories on the surface of wall. |
| 18 | Supply & laying Drain Water piping work out of PVC / HDPE hard pipes of 25 mm dia. incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors. |
| 19 | Supply & Laying of 1.1KV grade following sizes Unarmoured Cu cable for main MCB to ODU & ODU to IDU connection. Termination points must be socketed with Cu ring / pin type socket as per requirement. ( Cable Make - GLOSTER / KEI / Polycab / RR / Havells) |
| 20 | a) 4 Core 2.5 Sq.mm |
| 21 | b) 3 Core 4 Sq.mm |
| 22 | Supply and fixing of 1 phase timer control box for controlling AC machines made following accessories with IP - 42/43 protection with front door locking arrangement with all connection on angel iron frame on wall as per instruction of EIC.a) 2+10 way size double door SPN MCBDB--1 No. (LK)b) 240/415V, AC 32A, 2P Power contactor type MNX22-2P (Make-LK) - 1 No.c) Daily & weekly programmable basis Digital Timer Switch, min switching time 1 min, 25 ON/OFF programs - 1 no.(LK Cat no. - 67DDT0)d) 240/415V, 40A, DP MCB Isolator (Make:Legrand) 1 no e) 3 way Auto manual toggle switch--1 no.f) AC ON/OFF indicator - 1 set g) ON/OFF push button - 1 set. h) Interconnection by 2.5 sqmm Cu wire -- 3 mtr. |
| 23 | Supply, design, fabrication, installation of MS structural (ISI- Make)work for supports IDU/ODU both where needed i.e. 25x6 mm MS flat bar/ 50x50x6 mm MS angle etc with 2 coat painting (Approved by EIC) and vibration pad, stainless steel (SS-304) nut bolts as per site requirements incl scraffolding and carring changes. (ODU/ IDU support) (as per direction of E.I.C) |
| 24 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below |
| 25 | By ISI-Medium GI pipe |
| 26 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe |
| 27 | Excavation of soil for installation of Earth Electrode and filling & ramming (For Soft Soil) as per GS. |
| 28 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 29 | Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required A) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC Please Enable Macros to View BoQ information |