|
| 1 | Part-A (Material Provided by Contractor) 33 KV Line Khadda |
| 2 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 3 | F-bracket for 33 KV |
| 4 | Polymeric 33KV Pin Insulator |
| 5 | Number Plate with clamp and Nut & Bolt |
| 6 | Danger Plate with clamp and Nut & Bolt |
| 7 | G I Barbed Wire |
| 8 | Nut Bolt and washer all sizes |
| 9 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 10 | ‘E’ Bracket for 33 KV |
| 11 | Stay complete ( GI Stay ROD 20X1800mm , stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer) |
| 12 | Holding Clamp for Top,MS droper channel |
| 13 | Disc Fitting for drop B&S type |
| 14 | Disc Insulator B&S Polymeric Type |
| 15 | PG Clamp Dog to Dog |
| 16 | MS Angle Iron 65x65x6 mm Bracing 4300 mm long |
| 17 | Holding clamp for Bracing Angle |
| 18 | M S Channel 100x50 mm 2400 mm Long |
| 19 | G I Pipe 6\\" Dia |
| 20 | Holding Clamp for GI Pipe |
| 21 | Holding Clamp for cable |
| 22 | Lug for ACSR Dog Conductor |
| 23 | Stay Clamp |
| 24 | MS Guarding Angle |
| 25 | Guarding Angle Clamp |
| 26 | GI Wire 6 SWG |
| 27 | Gi Wire 8 SWG |
| 28 | 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor |
| 29 | PART – B- WORKShifting,loading and carriage of following materials on private truck at store centre Padrauna & Un-loading of the same with proper stacking at work site. |
| 30 | PCC Ple 9 Mtr Long |
| 31 | PCC Pole 11 Mtr Long |
| 32 | ACSR Dog Conductor. |
| 33 | 33KV \\"V\\" type Cross arm 100 x 50 x 6 mm, M.S. Chaneel |
| 34 | Top Channel 125x65 mm, 3200 mm long |
| 35 | 33 KV ‘XLPE’ Cable 3x300mm² |
| 36 | Laying of 33 KV 3x300Sq.mm, XLPE Cable including cost of Sand & Bricks , As per site requirement HDD (trenchless) method can be used. |
| 37 | Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor /Straight Through |
| 38 | Labour charges for inserting of G.I. Pipe, Rising of 33 KV cable in air,looping of 33KV XLPE Cable and jumpering complete work. |
| 39 | Special GI Pipe earthing upto water level for 33 KV Jointing Kit with materials. |
| 40 | Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 41 | Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 42 | Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 43 | Erection of Double pole structure on 9 mtr PCC Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, making plinth for Poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) . |
| 44 | Erection of Single pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 45 | Erection of Double pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 46 | Erection of Four pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 47 | Erection of Single pole as stud pole structure on 9 mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete). . |
| 48 | Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening &nozzling of stay wire with stay rod with the poles of required tension. |
| 49 | Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. |
| 50 | Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel. |
| 51 | Tree Cutting Compensation |
| 52 | Part-A (Material Provided by Contractor) 33 KV Line Bhiswamathwalgiri |
| 53 | Holding Clamp for Top, MS droper channel |
| 54 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 55 | F-bracket for 33 KV |
| 56 | Polymeric 33KV Pin Insulator |
| 57 | Number Plate with clamp and Nut & Bolt |
| 58 | Danger Plate with clamp and Nut & Bolt |
| 59 | G I Barbed Wire |
| 60 | Nut Bolt and washer all sizes |
| 61 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 62 | Stay complete (GI Stay ROD 20X1800mm, stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer) |
| 63 | Disc Fitting for drop B&S type |
| 64 | Disc Insulator B&S Polymeric Type |
| 65 | PG Clamp Dog to Dog |
| 66 | MS Angle Iron 65x65x6 mm Bracing 4300 mm long |
| 67 | Holding clamp for bracing angle |
| 68 | MS Guarding Angle |
| 69 | Guarding Angle Clamp |
| 70 | GI Wire 6 SWG |
| 71 | GI Wire 8 SWG |
| 72 | PART – B- WORKShifting, loading and carriage of following materials on private truck at store centre Padrauna & Un-loading of the same with proper stacking at work site. |
| 73 | 9M, PCC Pole |
| 74 | 11M, PCC Pole |
| 75 | ACSR Dog Conductor. |
| 76 | 33KV \\"V\\" type Cross arm 100 x 50 x 6 mm, M.S. Chaneel (20 Nos. existing 33 KV Cross Arm must be used in Line) |
| 77 | Top Channel 125x65 mm, 3200 mm long |
| 78 | Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 79 | Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 80 | Erection of Single pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 81 | Erection of Double pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 82 | Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening &nozzling of stay wire with stay rod with the poles of required tension. |
| 83 | Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. |
| 84 | Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel. |
| 85 | Charges for trimming excessive trees and plants along the line route |
| 86 | Dismantling Charges for 11 M ST Pole |
| 87 | Dismantling Charges for 9 M PCC Pole |
| 88 | Restringing, Tightening & Nozzling of old existing Conductor on pole with Fixing and tightening of existing insulators, cross arm, clamps, F-Bracket etc (with the help of old & new materils). |
| 89 | Shifting, Loading, Carriage & Unloading of old and damaged 33KV Line materials from work site to Store centre Padrauna, Distt. Kushinagar. Please Enable Macros to View BoQ information |