|
| 1 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and not exc 1.5m in depth and getting in hard/dense soil complete all as specified and directed. |
| 2 | Returning filling in with approved excavated soil including spreading levelling watering and well ramming in layers not exceeding 25cm thick, complete, all as specified and directed. |
| 3 | Removing of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 4 | Burnt bricks sub class 'B' laid flat dry across the cable for cable protection all as specified and directed. |
| 5 | Sand cushioning to UG cable 8cm thick before laying the cable and 15cm above the cable, stretching and testing of cable complete all as specified and directed. Note:(i) Consolidated / Punned sand shall be considered for purpose of payment (ii) Sand shall be same as specified for plastering work. |
| 6 | M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation of electric poles, struts PCC blocks and fair finish to exposed surfaces without using extra cement etc complete all as specified and directed. |
| 7 | PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole , including necessary form work complete all as specified and directed |
| 8 | Supply & fix in replacement of 2.5 sqmm 2 core PVC insulated FRLS copper multistranded cable cable from junction box to light fitting complete all as specified and directed. |
| 9 | Supply, laying, jointing and testing in replacement of XLPE insulated, armoured, heavy duty LT cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 4 core complete all as specified and directed. |
| 10 | All as per item No. 9 here-in-before but for cross sectional area 35 Sqmm 3.5 core complete all as specified and directed. |
| 11 | Supply and fixing in replacement LED flood light fitting 170/200 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including connection with 3 core 1.5 sqmm copper conductor cable from junction box / over head line complete all as specified and directed. |
| 12 | S & F in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary electrical connections from junction box to fitting terminal with 3 core 2.5 sq mm cable complete all as specified and directed. |
| 13 | Double walled corrugated HDPE duct pipe of 40 mm inner dia confirming to IS:14930 (Part-II) of approved colour with fittings for cable protection complete all as directed. |
| 14 | Supply and fixing and replacement GI pipe, light grade 40 mm bore, ISI Marked for protection to cable along the pole/across road crossing/passing through culvert complete all as specified. |
| 15 | Boring holes horizontally under Road without damaging the surface of road by mechnically/manually means with GI pipes (bore for passing of UG cable all as specified and as directed (GI pipe laid shall be measured seperately). |
| 16 | Supply and erecting GI Octogonal type pole( 07 RM) long size top dia 70 mm bottom dia 135mm thicness 3mm base plate 220x220mm base platethicness 12 mm foundation bolt M16x650x4 mm including RCC foundation nut bolt as per oem manufacture recommedation and GI Bracket single arm for fixing of street light complete all as specified and directed. |
| 17 | Supply & fixing in replacement of 3 Phase Nature switch Panel 12-15KW, 32Amps / Phase (SMART TIMER SWITCH) fixing for street light switch of wall/pole mountable SMC enclosure conforming to IP 54 consisting of Nature switch smart SPD.Isolater,MCB drive for loading , and terminal blocks the enclosure comes completeincluding 6sqmm 4 core FRLS cable wire minimum 2 RM long for connection to timer panel to exisiting lt panel with mounting brackets, MS flat clamps, nuts, bolts and washers complete all as specified and directed Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |