|
| 1 | [1.] 33 KV NAWADA LINE PART:-13.0 M long, STP Pole |
| 2 | Stone Pad (300x300x75 mm) |
| 3 | 33KV \\"V\\" type Cross arm |
| 4 | Top-bracket for 33 KV |
| 5 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 6 | 33KV Polymer Pin Insulator |
| 7 | G I Barbed Wire |
| 8 | Aluminium winding wire |
| 9 | Number Plate with clamp and Nut & Bolt |
| 10 | Danger Plate with clamp and Nut & Bolt |
| 11 | Nut and Bolt with washer all sizes |
| 12 | The Grouting and making of plinth of the support (1/6 of the full length of the supports) will be done as per norms in the CC 1:4:8 with cement, course sand and brick ballast including back filling and proper ramming.fixing of all clamps and other accessories as per relevant drawing. (i) 13 Mtr. Long S.T. poles |
| 13 | Armour rod with ferrules |
| 14 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 15 | X- Arm Holding Angle with clam 65x65x6 x 1600 mm. |
| 16 | E-bracket for 33 KV |
| 17 | Aluminium Paint |
| 18 | Red Oxide Paint |
| 19 | Earth wire Clamp |
| 20 | Top Channel 125x65 mm, 3200 mm long |
| 21 | Dropper Channel 100x50mm, 3000 mm long |
| 22 | Holding Clamp |
| 23 | M.S. Angle 65x65x6x4300 mm x2 Nos. Bracing set with 4 Nos. Clamps. |
| 24 | Complete Stay (GI Stay Rod 20x1800 mm, stay wire 7/8 SWG, Stay Clamp, Bolt, nut and washer |
| 25 | Grouting of Stay Rods 20x1800 mm. including all works of excavation, fixing, tightening & nozzling of stay with the poles and of required tension as per relevant drawing including back filling of earth and proper ramming. |
| 26 | 33 KV Polymer Disc Insulator B&S |
| 27 | 33 KV Disc Fitting for dog Conductor 70 KN B&S type |
| 28 | PG Clamp Dog to Dog |
| 29 | ACSR Dog Conductor |
| 30 | Tee off channel 125x65x1600 mm |
| 31 | Holding clamp for Tee off Channel |
| 32 | M+ Tower 19.30 Mtr. Long weigth above (2500 KG Weight) |
| 33 | Grouting of M+6 Tower with Plingth |
| 34 | Terminal Gantry |
| 35 | Lightening arrestor |
| 36 | Structure for above with Plinth & Foundation |
| 37 | Line isolator |
| 38 | Line isolator Structor |
| 39 | Post insulator |
| 40 | Structure for above with Plinth & Foundation |
| 41 | Chemical Earthing |
| 42 | Tree branches chopping |
| 43 | Carriage of following material from Center Store to Site: 13 Mtr. long S.T. Pole |
| 44 | A.C.S.R. DOG CONDUCTOR |
| 45 | [2.] 33 KV Rajeev Bhawan to District Court Link Line:Top Channel 125x65 mm, 3200 mm long |
| 46 | PG Clamp Dog to Dog |
| 47 | Lug 300 sqmm. |
| 48 | ACSR Dog Conductor |
| 49 | Bus Isolator |
| 50 | Structure for Bus Isolator with Plinth & Foundation |
| 51 | 33 KV 3x300 sqmm XLPE cable. |
| 52 | 33 KV H/S Jointing Kit 3x300 sqmm |
| 53 | Cable route Marker |
| 54 | G.I. Pipe 160 mm dia |
| 55 | G.I. Pipe Hoding Clamp |
| 56 | Digging & laying of 33 KV Cable in trench with sand & brick andback filling |
| 57 | Laying of 33 KV Cable in Air |
| 58 | Making of J/kit |
| 59 | Road Restoration Charge (Pakka Road) if Requried |
| 60 | Carriage of following material from Center Store to Site: A.C.S.R. DOG CONDUCTOR |
| 61 | 33 KV 3x300 sqmm XLPE cable. |
| 62 | [3.] 33 KV Chhata Tehshil Line PART:-S.T.P. 11.0 Mtr. Long |
| 63 | 13.0 M long, STP Pole |
| 64 | Stone Pad (300x300x75 mm) |
| 65 | 33KV \\"V\\" type Cross arm 100 x 50 x 6 mm, M.s Chaneel |
| 66 | Top-bracket for 33 KV |
| 67 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 68 | 33KV Pin Insulator |
| 69 | 33KV Pin with nuts |
| 70 | G I Barbed Wire |
| 71 | Aluminium winding wire |
| 72 | Number Plate with clamp and Nut & Bolt |
| 73 | Danger Plate with clamp and Nut & Bolt |
| 74 | Nut Bolt and washer all sizes |
| 75 | The Grouting and making of plinth of the support (1/6 of the full length of the supports) will be done as per norms in the CC 1:4:8 with cement, course sand and brick ballast including back filling and proper ramming.fixing of all clamps and other accessories as per relevant drawing. (i) 11 Mtr. Long S.T. poles |
| 76 | (ii) 13 Mtr. Long S.T. poles |
| 77 | Connecting Clamp for stup pole |
| 78 | Armour rod with ferrules |
| 79 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 80 | X- Arm Holding Angle with clam 65x65x6 x 1600 mm. |
| 81 | E-bracket for 33 KV |
| 82 | Aluminium Paint |
| 83 | Red Oxide Paint |
| 84 | Earth wire Clamp |
| 85 | Top Channel 125x65 mm, 3200 mm long |
| 86 | Dropper Channel 100x50mm, 3000 mm long |
| 87 | Holding Clamp |
| 88 | M.S. Angle 65x65x6x4300 mm x2 Nos. Bracing set with 4 Nos. Clamps. |
| 89 | Complete Stay (GI Stay Rod 20x1800 mm, stay wire 7/8 SWG, Stay Clamp, Bolt, nut and washer |
| 90 | Grouting of Stay Rods 20x1800 mm. including all works of excavation, fixing, tightening & nozzling of stay with the poles and of required tension as per relevant drawing including back filling of earth and proper ramming. |
| 91 | Disc Fitting for drop B&S type |
| 92 | Disc Insulator B&S |
| 93 | PG Clamp for Dog conductor |
| 94 | ACSR Dog Conductor |
| 95 | Tee off channel 125x65x1600 mm |
| 96 | Holding clamp for Tee off Channel |
| 97 | M.S. Guarding Angle 65x65x6x2300 mm. |
| 98 | M.S. Guarding Angle Holding clamp with nuts and bolts |
| 99 | Eye Bolts |
| 100 | G.I. wire 6 SWG |
| 101 | G.I. wire 8 SWG |
| 102 | Binding wire |
| 103 | Turn Buckle |
| 104 | Lug 3x300 sqmm. |
| 105 | Terminal Gantry |
| 106 | Lightening arrestor |
| 107 | Structure for Lightening arrestor with Plinth & Foundation |
| 108 | Line Isolator |
| 109 | Bus Isolator |
| 110 | Structure for Line Isolator & Bus Isolator with Plinth & Foundation |
| 111 | Post Insulator |
| 112 | Structure for Post Insulator with Plinth & Foundation |
| 113 | Chemical Earthing Complete |
| 114 | Supply of HDPE Pipe PN-6, PE-100 , DN-160mm dia Pipe for laying of 33KV Cable, 3x300Sq.mm |
| 115 | 33 KV 3x300 XLPE Cable |
| 116 | H/S O/D 33 KV 3x300 sqmm J/kit |
| 117 | Cable Route Marker |
| 118 | G.I. Pipe 160 mm dia |
| 119 | G.I. Pipe Holding Clamp |
| 120 | Cable Under ground work :-Laying of 33 KV Cable in Air |
| 121 | Laying of HDPE Pipe PE-100, PN-6, DN-160 mm dia Pipe for laying of 33KV, 3x300Sq.mm, XLPE Cable with HDD (trenchless) method including cablelaying. |
| 122 | Digging & laying of 33 KV Cable in tranch with sand & brick |
| 123 | Making of 33 KV J/kit |
| 124 | Chopping of branches of tree |
| 125 | Railway Department processing & documentation charges |
| 126 | Carriage of following material from Center Store to Site11 Mtr. long S.T. Pole |
| 127 | 13 Mtr. long S.T. Pole |
| 128 | A.C.S.R. DOG CONDUCTOR |
| 129 | 33 KV 3x300 XLPE Cable |
| 130 | [4.] 33 KV SATOHA LINE PART:-11.0 M long, STP Pole |
| 131 | Stone Pad (300x300x75 mm) |
| 132 | 33KV Polymer Pin Insulator |
| 133 | Insulated Single lead Cable 300 sqmmm. For cable connection |
| 134 | G I Barbed Wire |
| 135 | Aluminium winding wire |
| 136 | Number Plate with clamp and Nut & Bolt |
| 137 | Danger Plate with clamp and Nut & Bolt |
| 138 | Nut Bolt and washer all sizes |
| 139 | The Grouting and making of plinth of the support (1/6 of the full length of the supports) will be done as per norms in the CC 1:4:8 with cement, course sand and brick ballast including back filling and proper ramming.fixing of all clamps and other accessories as per relevant drawing. (i) 11 Mtr. Long S.T. poles |
| 140 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 141 | E-bracket for 33 KV |
| 142 | Aluminium Paint |
| 143 | Lug 3x300 sqmm. |
| 144 | Red Oxide Paint |
| 145 | Earth wire Clamp |
| 146 | Top Channel 125x65 mm, 3200 mm long |
| 147 | Dropper Channel 100x50mm, 3000 mm long |
| 148 | Holding Clamp |
| 149 | Complete Stay (GI Stay Rod 20x1800 mm, stay wire 7/8 SWG, Stay Clamp, Bolt, nut and washer) |
| 150 | Grouting of Stay Rods 20x1800 mm. including all works of excavation, fixing, tightening & nozzling of stay with the poles and of required tension as per relevant drawing including back filling of earth and proper ramming. |
| 151 | 33 KV Polymer Disc Insolator B&S |
| 152 | 33 KV Disc Fitting for dog Conductor 70 KN B&S type |
| 153 | PG Clamp Dog to Dog |
| 154 | Tee off channel 125x65x1600 mm |
| 155 | Holding clamp for Tee off Channel |
| 156 | 33 KV 3x300 sqmm XLPE cable. |
| 157 | 33 KV H/S Jointing Kit 3x300 sqmm |
| 158 | Cable route Marker |
| 159 | G.I. Pipe 160 mm dia |
| 160 | G.I. Pipe Hoding Clamp |
| 161 | Laying of 33 KV Cable in Air |
| 162 | laying of 33KV, 3x300Sq.mm, XLPE Cable with HDD (trenchless) method including cable laying. |
| 163 | Digging & laying of 33 KV Cable in loop tranch with sand & brick |
| 164 | Making of 33 KV J/kit |
| 165 | Lightening arrestor |
| 166 | Structure for above with Plinth & Foundation |
| 167 | Line isolator |
| 168 | Line isolator Structure |
| 169 | Post insulator |
| 170 | Structure for above with Plinth & Foundation |
| 171 | (F) Chemical Earthing Complete |
| 172 | Carriage of following material from Center Store to Site: 11 Mtr. long S.T. Pole |
| 173 | 33 KV 3x300 sqmm XLPE cable. Please Enable Macros to View BoQ information |