|
| 1 | Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass/UV stabilized PC Cover and lenses suitable for 75Wath to 90 Watt. Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved complete in all respect including Labour:9000-10800 system lumens, High Power LED with lenses, 120 Lm/W, PF>0.95, THD <10% at full lead, CRI >70,, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & >300V mato cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee CAT AAA |
| 2 | Supply & fixing of 7 mtr G1 Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect |
| 3 | Supply and Laying of 16 Sq mm 2 Core Aluminium Conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by Engineer in Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc |
| 4 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc, with charcoal/coke and salt as required. |
| 5 | Providing and fixing 25 mm X 5 mm Gl strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 6 | Supplying and drawing 3 x 1.5 sq. mm size FR IVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. |
| 7 | Supply and Laying of 63 mm dia (OD-63 MM & ID-51 mm Nominal) size DWC HDPE Pipe 151 Marked along with all accessories like socket, bend, couplers etc conforming to 15 14930, Part II Complete with fitting and Cutting, Jointing etc (direct in ground (75 cm below ground Level) Including Excavatin and refilling the trench but Excluding sand cushioning and protective covering etc complete as required |
| 8 | Supply and fixing of 5 to 32 amp rating 240/415V, 10KA, C curve SPMCB suitable for inductive load of following poles in existing DB complete with connections, testing and commissioning etc. as required. |
| 9 | Supply & Fixing of Radium Strip Green, Red and Yellow complete in all respect |
| 10 | Numbering of pole as per Direction of Engineer in Charge Please Enable Macros to View BoQ information |
