|
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and removing them to store |
| 3 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) |
| 4 | S & F Solid pvc Door Frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square etc. |
| 5 | S & F A Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately) |
| 6 | Supplying and fixing Factory Made Solid PVC Moulded Door (with particle boardcore ) Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawingg. Make: RAJASHRI PLASTIWOOD or equivalent make as approved by GE. |
| 7 | S&F 30mm thick Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 8 | S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 9 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge |
| 10 | S & F Three track sliding frame (88mm x 52mm) Providing and fixing factory made uPVC white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed |
| 11 | S&F for factory made uPVG white colour Sliding window Three track made of extruded profiles Area not exceeding 2.00 sqm with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 12 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 13 | S & F 4.8 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane |
| 14 | S & F 4 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane. |
| 15 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast. |
| 16 | S&F mild steel flat iron of size 25x3mm as in hold fast |
| 17 | S & F 100 mm long medium weight, cold rolled brass Butt hinges and fixed. |
| 18 | S & F in repair 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed type B-21. |
| 19 | S & F in repair 150 mm long Extruded brass handles, fabricated type polished |
| 20 | S & F in repair 150 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed |
| 21 | S & F in repair 100 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed |
| 22 | S & F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 23 | S & F in repair Cast iron body door closer hydraulically regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg |
| 24 | S&F in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float all as specified including necessary flush pipe as directed. |
| 25 | S & F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket, seat cover etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. fixed in repairs |
| 26 | S&F in repairs for 15 mm dia bore angle tap . |
| 27 | S&F in repairs for 15 mm dia bore 2 in 1 tap . |
| 28 | S&F in repairs PVC connection 15 mm bore 450 mm long |
| 29 | S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms). |
| 30 | Supply and fix 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 31 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 32 | S & F in repairs 15 mm bore Fancy type pillar taps,Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 33 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand. |
| 34 | S & F in repairs Toilet paper holder with flat recessedtype stainless steel Complete all as specified and directed |
| 35 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 36 | S&F of Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) Complete all as specified and directed |
| 37 | S&FTowel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) Complete all as specified and directed |
| 38 | S&F Low density polyethylene pipes (LDPE) waste pipes of pressure rating 6 kgf/cm2 fixed complete in floors |
| 39 | S&F ,Brass chromium plated Tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed |
| 40 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for r removal to store |
| 41 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for removal to store |
| 42 | Taking up or down 25 mm bore CPVC Pipe and connections, including cleaning for Refixing or removal to store |
| 43 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 16mm fittings on walls/ceiling or laying in floors complete all as specified. |
| 44 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 20 mm fittings on walls/ceiling or laying in floors complete all as specified. |
| 45 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 25mm fittings on walls/ceiling or laying in floors complete all as specified. |
| 46 | Demolition and breaking up including removing salt glazed stoneware pipe 150mm bore (internal) with concrete bedding and haunching complete including necessary earth work as required all as specified and directed. |
| 47 | M&L for cement concrete bed to drain pipe 150mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed. |
| 48 | M&L for Reinforced concrete pipes 150mm dia (internal), class NP3, laid and jointed complete with collars as in sewage lines laid in trenches and jointed complete |
| 49 | Taking down rain water pipes including all fittings any size and pattern. |
| 50 | M&L for 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls . |
| 51 | M&L for 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls . |
| 52 | S/F 75 PVC(SWR) branch piece,single (single Y) equal or unequal with access door |
| 53 | S/F 110PVC(SWR) branch piece,single (single Y) equal or unequal with access door |
| 54 | S & F 75 mm dia.,PVC Bends (any Radius) with access door |
| 55 | S & F 110 mm dia., PVC Bends (any Radius) with access door |
| 56 | S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 57 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. |
| 58 | S&F vitrified ceramic tiles 8 to 10 mm thick (square or rectangular) polished area of each tile exceeding .36 sqm but not exc. .42 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 complete all as specified and as directed |
| 59 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match oloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes. |
| 60 | Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 . |
| 61 | Taking down cement plaster on brick wall stone wall etc including raking out joints, hacking for key securing down with water etc |
| 62 | M&L, rendering 15 mm thick in cement mortar 1:4 on other than fair face of brick or surface finished even and smooth without using extra cement . |
| 63 | M&L, rendering 10 mm thick in cement mortar 1:6 on other than fair face of brick or surface finished even and smooth without using extra cement . |
| 64 | M&L, rendering 5 mm thick in cement mortar 1:3 on concrete surface of ceiling finished even and smooth without using extra cement . |
| 65 | M&L for applying two coats 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Lit/10 Sqm over newly plastered by auto roller upto 4th floor surfaces incl preparation of surfaces. |
| 66 | M&L for preparation of newly plastered surfacesof wall by Vaccum based sanding machine applying wall care putty (Multipurpose mixer shall be used for uniform and poper mixing of putty ) and applying two coats of emulsion distemper white or coloured by auto roller complete all as specified and directed as per manufacturetr instruction. |
| 67 | M&L for Preperation of new plastered surface of ceiling applying three coat of white wash. |
| 68 | Preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash. |
| 69 | M&L for Granite work 18 to 20mm thick(table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed. |
| 70 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc including removal of debris out side MD land |
| 71 | M&L for Pre-cast cement concrete block masonry with solid blocksType C-1 (1:3:6) 20mm graded crushed stone aggregate, exc. 10cm in width and setting in mortar1:6 complete all as specified. |
| 72 | M & L fixing 19mm prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber to timber frame work |
| 73 | Demolition of reinforced concrete in roofs, floors (other than ground floors), beams, stair cases, landings chajjas and similar suspended works |
| 74 | M&L for reinforced cement concrete Type B1 1:2:4 (nominal mix) mix using 20 mm graded aggregates as in chajjas. |
| 75 | Formwork of rough finished surface of concrete to chullah hoods, chajjas, troughs and similar items including edges. |
| 76 | M & L for TMT reinforcement 12mm dia and over cut to length bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete. |
| 77 | M & L for TMT reinforcement 8 mm dia and over cut to length for stirrups bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete. |
| 78 | M&L for complete removal of existing treatment from old decorated plastered surface of wall by by Vaccum based sanding machine removal of nails etc and filling cracks /hole with putty ,applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and poper mixing of putty ) and applying two coats of emulsion distemper white or coloured by auto roller complete all as specified and directed as per manufacturer instruction. |
| 79 | Dismantling water tanks and removing to store exc 500 & not exc 1000 ltrs |
| 80 | S&F in repair1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified |
| 81 | S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 82 | M&L for Plain Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) 100mm thick as in sunken floors,foundations, filling and mass concrete type D- 2, 1:4:8 (40mm graded aggregate) Complete all as specified and directed |
| 83 | S&F Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and directed |
| 84 | M&L for removal of existing treatment from old decorated plastered surface of wall by by Vaccum based sanding machine removal of nails etc and filling cracks /hole with putty ,applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty ) and then apply one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm by using auto rollercomplete all as specified and as per specified by Engineer -in-Charge . |
| 85 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern (with necessary safety measures i.e.scaffoldings/hanging platform upto 10th floor using safety harness and necessary precaustions) roof covering complete all as specified and directed. |
| 86 | S&F for 0.50 mm thick pre-painted corrugated/’Z’ profile galvalume roofing sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55% aluminium and 45% zinc) pre-painted with primer coat of 5 micron and coated with Silicon modified polyester coating of 20 micron and alkalyed coating of 10 micron on reverse side. End rib, side over lap and over lap of sheets shall be designed for anti capillary activities to avoid any seepage of water through lateral overlap as per manufacturer’s instructions, including fixing with self drilling and self tapping screws 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. Screws shall be of “HILTI” make Complete all as specified and as directed. (with necessary safety measures i.e.scaffoldings/hanging platform upto 10th floor using safety harness and necessary precaustions.) |
| 87 | S & F GI frame work for seamless ceiling comprising of GI permeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to suurounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equal flages of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fateners with and including ceiling section (not exc 1.2m lenght) of 0.55 mm thickness having urled web of 50mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. |
| 88 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifieHangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 89 | S&F 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) |
| 90 | Taking down of existinng roof treatment from roof and terrance, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following specification:- (a) Applying cement slurry over concrete surfaces @ 3 kg/sqm.(b) M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate on roof slab (c) Rendring 15mm thick in cement mortar (1:4) mixed with water proffing compound as per manufactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course).(d) Applying evenly one coat of cold bituminous primer conforming to [email protected] liter per square metre on the cleaned plastered surfaces (e) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces.(f) Applying a layer of APP based polymeric membrane, 3mm thick (minimum)Weighing 3.50 Kg per square metre reinforces) with polyster non woven fabric wighing not less than 160 gms per square metre by torch application. The overlap shall be not less than 100mm on transverese direction and 75 mm on longitudinal direction and sealing overlaps.(g) Applying evenly one coat of Aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane at 5th floor complete all as specified and directed |
| 91 | M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded granite stone aggregate) as in flooring /hard standing/ Plinth protection finishing the concrete surface even and smooth without using extra cement. |
| 92 | Surface dressing not exceeding 15 cm deep and getting out in Soft / Loose soil complete all as specified and as directed. |
| 93 | M&L Hardcore Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 94 | M&L for Plain Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in floors,foundations, filling and mass concrete type D- 2, 1:4:8 (40mm graded aggregate) Complete all as specified and directed |
| 95 | M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 96 | SCHEDULE 'A' PART-I: B/R WORKS |
| 97 | Taking down aluminium / copper point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, cover plate , frame and light fittings etc. and making good the disturbed surface on walls floors complete all as specified and directed by Engr-in-charge. |
| 98 | M & L For Point Wiring complete with 1100 Volts, FRLSH Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through PVC Conduit concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light Point / Fan Point /bell pointcontrolled by One Switch with all accessories complete all as specified. [Note- The PVC Conduit to Concealed in wall through cutting,Chassing,Pining in making good surfacing where required and pointing in cement mortar and making good for same unit rates are inculded for same] |
| 99 | Description all as per item 96 above but in stove enamelled steel conduit complete all as specified and as directed |
| 100 | Description all as per item No. 96 above but for 05Amp switch socket out let, same board complete all as specified |
| 101 | Description all as per item No. 96 above but for 05Amp switch socket out let, independent with 1.5sqmm copper cable of PVC insulated, unsheathed, multi stranded and 1.5 Sqmm for earth continuity conductor, complete all as specified |
| 102 | Description all as per item No. 96 above but for 15/16Amp switch socket out let, independent with 4 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified |
| 103 | S & F Modular switch 1 way 6A, 1 module single pole complete all as specified and directed by Engr-in-charge. |
| 104 | S & F Modular switch 1 way 16A, 1 module single pole complete all as specified and directed by Engr-in-charge. |
| 105 | S & F ceiling rose surface bake lite with 3 terminals complete all as specified and directed by Engr-in-charge. |
| 106 | S & F of Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified. |
| 107 | S & F of Socket 15A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified. |
| 108 | S & F of modular Fan step regulator, 120W - 2 module complete all as specified. |
| 109 | S&F flame proof rotary type with terminl box in LM6, 16A, Single Pole 250V |
| 110 | S&F Flame proof weather proof LED light fitting 2 x 16 watts , CMRI certified recommended gor gar/ vapour group of II A & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluinium housing with heat resistant toughened glass with LED tube light fixtures drivers holders, connectors etc complete with all aceesories prewired and includin connecting up with three core flexible copper cable all as specified and as directed |
| 111 | S & F LED tube light fittings, retro bar professional WH 5700K to 6200K and minimum 20 Watt of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. |
| 112 | S & F LED mirror light fittings, 2 feet long of minimum 900 lumens (9 Watt) of cool white / warm wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. |
| 113 | S & F Building Security light LED type of minimum 3000 Lumens (35 W) Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 114 | S & F Square recessed mounted LED light of round type for Ceiling cutout: height 16 mm, minimum 10 Watts warm/cool day light 1' x 1' with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 115 | S & F Square recessed mounted LED light for Ceiling cutout: height 16 mm, minimum 10 Watts warm/cool day light 2' x2' with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 116 | Taking down ceiling fan of any size from its position and doing complete repair of fan and refixing the same after repairs complete all as directed by Engr-in-Charge. . |
| 117 | Supply and fixing in replacement of Factory made sheet metal enclosure for VTPN MCCB DBs double door (Fixed flush to the wall), with provision of MCCB as incommer & outgoing as TPN 415 volt, 4 Way, IP-43 protection with 200 Amp rated bus bar and 4.0Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified. |
| 118 | Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified. |
| 119 | S & F in repairs MCCB 3 / 4 Pole, 125 Amps, 50 Hz, 16KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as specified and as directed. |
| 120 | Supply and fixing of MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified |
| 121 | Supply and fixing of MCB 6 to 32Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified |
| 122 | Supply and fixing of MCB 63-100Amp, 415 Volt, TP/TPN, breaking capacity 10 KA 'C' series, , complete all as specified |
| 123 | M&L for sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6.0Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate. |
| 124 | M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate. |
| 125 | S & F moduler SPN enclosure for AC with a two pin and earth plug and socket complete with one MCB, SPN, 20 Amps, 240 volts, 10 KA complete suitable for AC all as specified and directed. |
| 126 | Supply and laying of synthetic insulation rubber mat of size 1MX2MX2mm thickness suitable up to 3.3KV power supply, insulation category of class A for indoor LT panel complete all as specified |
| 127 | M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber,CI frame with CI 10mm thick cover, 20mm dia GI medium grade pipe for watering , and water funnel with wirw mesh, 20mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion. |
| 128 | M&L for 4mm dia galvanised iron wire for earthing connection to building, complete all as specified. |
| 129 | Supply lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty ) 1100volt grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and as directed |
| 130 | Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified. |
| 131 | Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified |
| 132 | Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified. |
| 133 | M&L heavy duty DWC pipe 40mm dia for cable/wire protection duly laid in floors / ground, fixed to wall etc complete all as specified and as directed |
| 134 | S & F voltage stablizer of capacity 5.0 KVA for automatic operation, sigle phase naturally air cooled indoor type & designed for input varitation between 170 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of ( + / - ) 2.5%, complete all as specified and directed by Engr-in-Charge. |
| 135 | S & F voltage stablizer of capacity 4.0 KVA for automatic operation, sigle phase naturally air cooled indoor type & designed for input varitation between 170 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of ( + / - ) 2.5%, complete all as specified and directed by Engr-in-Charge. |
| 136 | Supply and fixing of cable suitable for fixing of stabilizer, flexible electric cable , 1100volt grade with multistranded copper conductor of size 4 sqmm 3 core complete all as specified and directed by Engr-in-charge. |
| 137 | Supply and replace metal / PVC Plug Top suitable for STABILIZER for connecting in Power Socket complete all as specified and directed by Engr in charge. Please Enable Macros to View BoQ information |
