|
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and removing them to store |
| 3 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) |
| 4 | S & F Solid pvc Door Frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square etc. |
| 5 | S & F A Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately) |
| 6 | Supplying and fixing Factory Made Solid PVC Moulded Door (with particle boardcore ) Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawingg. Make: RAJASHRI PLASTIWOOD or equivalent make as approved by GE. |
| 7 | S&F 30mm thick Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 8 | Supply & fixed Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 9 | S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 10 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 11 | S&F for B Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snapbeading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 12 | S & F 4.8 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane |
| 13 | S & F 4 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane. |
| 14 | S & F in repair 125 mm long medium weight, cold rolled steel Butt hinges and fixed.complete all as specified and directed by engg-in-charge |
| 15 | S & F in repair 100mm long Butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed by engg-in-charge |
| 16 | S & F in repair 150 mm long mild steel pressed handles, stove enamelled black complete all as specified and directed by engg-in-charge |
| 17 | S & F in repair 150 mm long mild steel tower bolts, stove enamelled black with right bolt and fixed all as specified and directed by engg-in-charge |
| 18 | S & F in repair 100 mm long mild steel tower bolts, stove enamelled black with right bolt and fixed all as specified and directed by engg-in-charge |
| 19 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 20 | S & F Cast iron body door closer hydraulically regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg |
| 21 | S&F 10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float all as specified including necessary flush pipe as directed. |
| 22 | S&F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket, seat cover etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified |
| 23 | S&F in repairs for 15 mm dia bore angle tap . |
| 24 | S&F in repairs for 15 mm dia bore 2 in 1 tap . |
| 25 | S&F in repairs PVC connection 15 mm bore 450 mm long |
| 26 | S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms). |
| 27 | Supply and fix 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 28 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 29 | S & F in repairs 15 mm bore Fancy type pillar taps,Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 30 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand. |
| 31 | S & F in repairs Toilet paper holder with flat recessedtype stainless steel Complete all as specified and directed |
| 32 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 33 | S&F of Vitreous China Urinal, Half stall type whitecomplete including providingand fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs withand including 60mm long brassscrews, pointing around urinalback in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. Complete all as specified and directed |
| 34 | S&F of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Complete all as specified and directed |
| 35 | S&F of Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) Complete all as specified and directed |
| 36 | S&FTowel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) Complete all as specified and directed |
| 37 | S&F Low density polyethylene pipes (LDPE) waste pipes of pressure rating 6 kgf/cm2 fixed complete in floors |
| 38 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for r removal to store |
| 39 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for removal to store |
| 40 | Taking up or down 25 mm bore CPVC Pipe and connections, including cleaning for Refixing or removal to store |
| 41 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 16mm fittings on walls/ceiling or laying in floors complete all as specified. |
| 42 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 20 mm fittings on walls/ceiling or laying in floors complete all as specified. |
| 43 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 25mm fittings on walls/ceiling or laying in floors complete all as specified. |
| 44 | Demolition and breaking up including removing salt glazed stoneware pipe 150mm bore (internal) with concrete bedding and haunching complete including necessary earth work and remove from site outside of MOD land as required all as specified and directed. |
| 45 | M&L for cement concrete bed to drain pipe 150mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed. |
| 46 | M&L for Reinforced concrete pipes 150mm dia (internal), class NP3, laid and jointed complete with collars as in sewage lines laid in trenches and jointed complete |
| 47 | Taking down rain water pipes including all fittings any size and pattern. |
| 48 | M&L for 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls . |
| 49 | S & F 110 mm dia., PVC Bends (any Radius) with access door |
| 50 | S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 51 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing unserviceable tiles rubbish off the MOD permises. |
| 52 | S&F vitrified ceramic tiles 8 to 10 mm thick (square or rectangular) polished area of each tile exceeding .36 sqm but not exc. .42 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 complete all as specified and as directed |
| 53 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match oloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes. |
| 54 | Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 . |
| 55 | Screed bed or bedding layer of Cement mortar 1:4 of 15 mm thick for laying floor finishes complete all as specified and as directed. |
| 56 | M&L for 20mm thick Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to matchwith shade of granite.complete all as specified and as directed. |
| 57 | M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded granite stone aggregate) as in flooring /hard standing/ Plinth protection finishing the concrete surface even and smooth without using extra cement. |
| 58 | Taking down cement plaster on brick wall stone wall etc including raking out joints, hacking for key securing down with water etc |
| 59 | M&L, rendering 15 mm thick in cement mortar 1:4 on other than fair face of brick or surface finished even and smooth without using extra cement . |
| 60 | M&L, rendering 10 mm thick in cement mortar 1:6 on other than fair face of brick or surface finished even and smooth without using extra cement . |
| 61 | M&L, rendering 5 mm thick in cement mortar 1:3 on concrete surface of ceiling finished even and smooth without using extra cement . |
| 62 | M&L for applying two coats 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Lit/10 Sqm over newly plastered by auto roller upto 4th floor surfaces incl preparation of surfaces. |
| 63 | M&L for preparation of newly plastered surfacesof wall by Vaccum based sanding machine applying wall care putty (Multipurpose mixer shall be used for uniform and poper mixing of putty ) and applying two coats of emulsion distemper white or coloured by auto roller complete all as specified and directed as per manufacturetr instruction. |
| 64 | M&L for Preperation of new plastered surface of ceiling applying three coat of white wash. |
| 65 | M&L for removal of existing treatment from old decorated plastered surface of wall by by Vaccum based sanding machine removal of nails etc and filling cracks /hole with putty ,applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty ) and then apply one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm by using auto rollercomplete all as specified and as per specified by Engineer -in-Charge . |
| 66 | M&L Preparing old surfaces of wall by brooming down or by steel wire brushing and applying one coat of distemper. complete all as specified and directed by engr-in-charge |
| 67 | Preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash. |
| 68 | Taking down of existinng roof treatment from roof and terrance, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following specification:- (a) Applying cement slurry over concrete surfaces @ 3 kg/sqm.(b) M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate on roof slab (c) Rendring 15mm thick in cement mortar (1:4) mixed with water proffing compound as per manufactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course).(d) Applying evenly one coat of cold bituminous primer conforming to [email protected] liter per square metre on the cleaned plastered surfaces (e) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces.(f) Applying a layer of APP based polymeric membrane, 3mm thick (minimum)Weighing 3.50 Kg per square metre reinforces) with polyster non woven fabric wighing not less than 160 gms per square metre by torch application. The overlap shall be not less than 100mm on transverese direction and 75 mm on longitudinal direction and sealing overlaps.(g) Applying evenly one coat of Aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane at 5th floor complete all as specified and directed |
| 69 | Dismantling water tanks and removing to store exc 500 & not exc 1000 ltrs |
| 70 | S&F in repair1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified |
| 71 | S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 72 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed. |
| 73 | S&F for 0.50 mm thick pre-painted corrugated/’Z’ profile galvalume roofing sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55% aluminium and 45% zinc) pre-painted with primer coat of 5 micron and coated with Silicon modified polyester coating of 20 micron and alkalyed coating of 10 micron on reverse side. End rib, side over lap and over lap of sheets shall be designed for anti capillary activities to avoid any seepage of water through lateral overlap as per manufacturer’s instructions, including fixing with self drilling and self tapping screws 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. Screws shall be of “HILTI” make. T&P to reach the roof to fi the sheets to be arranged by the contractor and Complete all as specified and as directed. (Make : TATA BLUE SCOPE/ CRIL/METCO) |
| 74 | S & F fiber glass reinforced translucent corrogated sheeting 2mm thick with two corrogations side lap fixed with self tapping self driven screws and washer 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. Screws shall be of “HILTI” make. T&P to reach the roof to fi the sheets to be arranged by the contractor and Complete all as specified and as directed. (Make : TATA BLUE SCOPE/ CRIL/METCO) |
| 75 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 76 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 77 | S&F in repair Fe 410 -W (Gde E- 250) quality A6 Roof trusses (framed), trussed, purlins, crane gantries, rails andfastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc) complete all as specified and directed. |
| 78 | Preparation of new or previously untreated steel surface of any discription over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of redoxide primer. complete all as specified and directed. |
| 79 | M&L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth soft/loose soil and getting out complete all as specified and directed |
| 80 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc including removal of debris out side MD land |
| 81 | Demolition of Concrete of any description and in any position not otherwise specifically provided for in drains Complete all as specified and directed. |
| 82 | M&L for Plain Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in floors,foundations, filling and mass concrete type D- 2, 1:4:8 (40mm graded aggregate) Complete all as specified and directed |
| 83 | M&L for Pre-cast cement concrete block masonry with solid blocksType C-1 (1:3:6) 20mm graded crushed stone aggregate, exc. 10cm in width and setting in mortar1:6 complete all as specified. |
| 84 | M&L PCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in surface channels and drains etc. |
| 85 | M&L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 86 | Add or deduct from item No 9 for forming fair finished channels or drains for each 25mm girth or part thereof over or under 30cm. |
| 87 | M&L for PCC 1:3:6 type C0 with 12.5 mm size aggregte as in coping |
| 88 | M & L for PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints fixed in floors (for providing weep holes) |
| 89 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. soft/loose soil. Complete all as specified and directed |
| 90 | M & L for TMT reinforcement 12mm dia and over cut to length bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete. |
| 91 | M&L for Providing precast cement concrete Type B-1 (1:2:4) 20mm graded stone aggregate as landings, cover slabs (for man holes,open drain etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces etc. and setting in mortar CM 1:6 complete with joints to match all as specified and directed. |
| 92 | M&L Demolition of Concrete in ground floors andpavings n exc 15 cm thickness(below or above ground level all as specified and directed. |
| 93 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level not exceeding 1.5 M above the starting point |
| 94 | M & L for Cement concrete 100mm thick type B-1, 1:2:4 using 20mm graded stone aggregate as in hardstanding and paving etc all as spcified & directed. |
| 95 | M & L for Forming 30mm deep and 10mm wide construction joints filled with with sealing compound, Grade ‘A’ for 100mm thickness of concrete slab. |
| 96 | M & L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 100mm thickness of concrete slab. |
| 97 | M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' |
| 98 | M&L 40mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed |
| 99 | M&L Pre polished kota stone slab 20-25 mm thick over cement screed base laid in cement mortar 1:6 20mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 100 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting,dado and pillar laid over cement screed base laid in cement mortar 1:4 10mm thick and jointed complete all as specified and directed |
| 101 | Demolition of Un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) all as specified and as directed. |
| 102 | Excavation over areas not exceeding 1.5 m deep in soft/loose soil as specified and as directed. |
| 103 | M&L hardcore of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface |
| 104 | M&L for providing 150 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base,sub floor,paving where it is directed. |
| 105 | M&L for providing 75 mm thick PCC (1:2:4) type B2 using 40 mm graded stone aggregate as in sub base,sub floor,paving where it is directed. |
| 106 | M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed. |
| 107 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigments complete all as specified and directed. |
| 108 | M&L for Chequered cement concrete tiles 30cm x 30cm 22 - 25 mm thick set, jointed and pointed in neat cement slurry infloors with grey cement and pigment laid over 15 mm thick screed bed or bedding layer in CM 1:6 including dismantling of old tiles complete all as specified and as directed. |
| 109 | SCHEDULE 'A' PART-I: B/R WORKS |
| 110 | Taking down aluminium / copper point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, cover plate , frame and light fittings etc. and making good the disturbed surface on walls floors complete all as specified and directed by Engr-in-charge. |
| 111 | M & L For Point Wiring complete with 1100 Volts, FRLSH Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through PVC Conduit concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light Point / Fan Point /bell pointcontrolled by One Switch with all accessories complete all as specified. [Note- The PVC Conduit to Concealed in wall through cutting,Chassing,Pining in making good surfacing where required and pointing in cement mortar and making good for same unit rates are inculded for same] |
| 112 | Description all as per item 2 above but in stove enamelled steel conduit complete all as specified and as directed |
| 113 | Description all as per item No. 2 above but for 05Amp switch socket out let, same board complete all as specified |
| 114 | Description all as per item No. 2above but for 05Amp switch socket out let, independent with 1.5sqmm copper cable of PVC insulated, unsheathed, multi stranded and 1.5 Sqmm for earth continuity conductor, complete all as specified |
| 115 | Description all as per item No. 2 above but for 15/16Amp switch socket out let, independent with 4 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified |
| 116 | S & F Modular switch 1 way 6A, 1 module single pole complete all as specified and directed by Engr-in-charge. |
| 117 | S & F Modular switch 1 way 16A, 1 module single pole complete all as specified and directed by Engr-in-charge. |
| 118 | S & F ceiling rose surface bake lite with 3 terminals complete all as specified and directed by Engr-in-charge. |
| 119 | S & F of Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified. |
| 120 | S & F of Socket 15A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified. |
| 121 | S & F of modular Fan step regulator, 120W - 2 module complete all as specified. |
| 122 | S&F flame proof rotary type with terminl box in LM6, 16A, Single Pole 250V |
| 123 | S & F in repairs Wall mounted AC plug and socket distribution box (Industrial socket) including plug connector of 32 Amps, 3 pole, neutral and earth, IP 44 protection of metal body three phase 415 Volts, 50 Hz with provision for one 32 Amps MCB TPN including necessary fixing arrangements complete all as directed by the Engineer-in-Charge. |
| 124 | Supply and fix flamproof exhaust fan 18Inch , 230 volts single phase fitted with flameproof motor , 1440 rpm,Temp class T-6 as per latest IS, cast iron standard for motor body, blades- Al alloy, alongwith detachbale GI Mesh with frame in front , with solid slection type gasket, made from neoprene or superior similar material, epoxy light gray shade , provided with proper earthing termiinals complete all as specified and as directed |
| 125 | S&F Flame proof weather proof LED light fitting 1 x 16 watts , CMRI certified recommended gor gar/ vapour group of II A & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluinium housing with heat resistant toughened glass with LED tube light fixtures drivers holders, connectors etc complete with all aceesories prewired and includin connecting up with three core flexible copper cable all as specified and as directed |
| 126 | S & F LED tube light fittings, retro bar professional WH 5700K to 6200K and minimum 20 Watt of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. |
| 127 | S & F LED mirror light fittings, 2 feet long of minimum 900 lumens (9 Watt) of cool white / warm wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge. |
| 128 | S & F Building Security light LED type of minimum 3000 Lumens (35 W) Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 129 | S & F Building Security light LED type of minimum (90 W) Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 130 | S & F Square recessed mounted LED light of round type for Ceiling cutout: height 16 mm, minimum 10 Watts warm/cool day light 1' x 1' with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size incluidng taking down old unsv fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 131 | Taking down ceiling fan of any size from its position and doing complete repair of fan and refixing the same after repairs complete all as directed by Engr-in-Charge. . |
| 132 | Taking down Exhaust fan/Air circulator fan of any size from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, fan capacitor of 1.5 mfd/4 mfd and other spare parts and refixing complete all as directed by Engr-in-Charge. (new fans will be measured and paid separately under supply only items . |
| 133 | Rewinding of Exhaust fan motor of sweep upto 300mm & any make (including flamepfoof/normal type), with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size, etc. complete all as specified and directed by Engineer- in -Charge. |
| 134 | Supply and fixing in replacement of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB TPN/TP & RCCB , complete all as specified. |
| 135 | Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified. |
| 136 | Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified. |
| 137 | Supply and fixing of MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified |
| 138 | Supply and fixing of MCB 6 to 32Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified |
| 139 | Supply and fixing of MCB 63-100Amp, 415 Volt, TP/TPN, breaking capacity 10 KA 'C' series, , complete all as specified |
| 140 | M&L for sub main wiring with four run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6.0Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 4 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate. |
| 141 | M&L for sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6.0Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate. |
| 142 | M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate. |
| 143 | M&L for sub main wiring with two run of 1.5 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 1.5.0 Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduict shall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate. |
| 144 | S & F moduler SPN enclosure for AC with a two pin and earth plug and socket complete with one MCB, SPN, 20 Amps, 240 volts, 10 KA complete suitable for AC all as specified and directed. |
| 145 | Supply and laying of synthetic insulation rubber mat of size 1MX2MX2mm thickness suitable up to 3.3KV power supply, insulation category of class A for indoor LT panel complete all as specified |
| 146 | M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber,CI frame with CI 10mm thick cover, 20mm dia GI medium grade pipe for watering , and water funnel with wirw mesh, 20mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion. |
| 147 | M&L for 4mm dia galvanised iron wire for earthing connection to building, complete all as specified. |
| 148 | Supply lay and testing of cable in trenches/walls XLPE insulated, armoured electric cable (heavy duty ) 1100volt grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and as directed |
| 149 | Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified. |
| 150 | Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified |
| 151 | Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified. |
| 152 | M&L heavy duty DWC pipe 40mm dia for cable/wire protection duly laid in floors / ground, fixed to wall etc complete all as specified and as directed Please Enable Macros to View BoQ information |
