Tender For E-Tender For Manufacturing And Supply Of Retro Reflective Sign Boards At 14 N0s. Hydrological Observation Site Offices & Direction Boards For Sites/H.O Telemetry Pertaining To Bagmati Kamla Balan Sub-Division, Darbhanga Under Lower Ganga D, Patna-Bihar
TDR : 55644546
Tender Notice
BOQ
7 Days Left
Patna
Bihar
Tender For E-Tender For Manufacturing And Supply Of Retro Reflective Sign Boards At 14 N0s. Hydrological Observation Site Offices & Direction Boards For Sites/H.O Telemetry Pertaining To Bagmati Kamla Balan Sub-Division, Darbhanga Under Lower Ganga D
Name of Work:- e-Tender for MANUFACTURING AND SUPPLY OF RETRO REFLECTIVE SIGN BOARDS AT 14 N0S. HYDROLOGICAL OBSERVATION SITE OFFICES & DIRECTION BOARDS FOR SITES/H.O TELEMETRY PERTAINING TO BAGMATI KAMLA BALAN SUB-DIVISION, DARBHANGA UNDER LOWER GANGA DIVISION-1, CENTRAL WATER COMMISSION, PATNA.
Sl. No.
Item Description
1
MANUFACTURING AND SUPPLY OF RETRO REFLECTIVE SIGN BOARDS AT 14 N0S. HYDROLOGICAL OBSERVATION SITE OFFICES & DIRECTION BOARDS FOR SITES/H.O TELEMETRY PERTAINING TO BAGMATI KAMLA BALAN SUB-DIVISION, DARBHANGA UNDER LOWER GANGA DIVISION-1, CENTRAL WATER COMMISSION, PATNA
2
Manufacturing and supplying of Retro Reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35 * 35 * 5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.
3
Informatory rectangular sign boards of 0.762m x 0.457m (2.5' * 1.5') with single M.S Tee section ISMT 50 * 50 * 6 mm of support length of 2500 mm
4
Informatory rectangular sign boards of 1.2m * 0.6m (3.94' * 1.97') without any M.S Tee section ISMT 50 * 50 * 6 mm
5
Informatory rectangular sign boards of 1.21m x 0.9m (4' * 3') with double M.S Tee section ISMT 50 * 50 * 6 mm of support length of 2500 mm
6
Transportation and Misc. (rate per piece) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
