Name of Work:- Construction of new Hall for Bank of Baroda Extension at MNNIT Allahabad Academic C us | Sl. No. | Item Description | |
| 1 | Construction of new Hall for Bank of Baroda Extension at MNNIT Allahabad Academic Campus | | 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil | | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | | 4 | Providing centering & shuttering including strutting, propping etc. & removal of form including all materials, labour and T & P etc. required for proper completion of work all completeFoundation, Footing, base of columns and plinth beam in any shape and size upto plinth level. | | 5 | Providing centering & shuttering including strutting, propping etc. & removal of form including all materials, labour and T & P etc. required for proper completion of work all completeColumns, Pillars, Piers, Abutments, Posts and Struts | | 6 | Providing centering & shuttering including strutting, propping etc. & removal of form including all materials, labour and T & P etc. required for proper completion of work all completeLintels, beams, plinth beams, girders, bressumers and cantilevers | | 7 | Providing centering & shuttering including strutting, propping etc. & removal of form including all materials, labour and T & P etc. required for proper completion of work all completeSuspended floors, roofs, landings, balconies and access platform | | 8 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cumAll works up to Plinth level. | | 9 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cumAll works Above Plinth level & upto Ground Floor | | 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. | | 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | | 12 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) | | 13 | 15 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) | | 14 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) | | 15 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core etc. are required. complete in all respect. Make- Anchor Roma, Havells crabtree, C&S. Wire Make- KEI,R.R Kable, Kalinga Premium. HPL, Havells. | | 16 | Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Complete in all respect. Make- Anchor Roma, Havells crabtree, C&S. | | 17 | Wiring for following circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Complete in all respect . Make- KEI,R.R Kable, Kalinga Premium. HPL, Havells, Rallison, V-Marc 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | | 18 | Wiring for following circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Complete in all respect .Make- KEI,R.R Kable, Kalinga Premium. HPL, Havells, Rallison, V-Marc 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire | | 19 | Wiring for following circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Complete in all respect . Make- KEI,R.R Kable, Kalinga Premium. HPL, Havells, Rallison, V-Marc 2 X 10.0 sq. mm + 1 X 6.0 sq. mm earth wire | | 20 | Wiring for following circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Complete in all respect . Make- KEI,R.R Kable, Kalinga Premium. HPL, Havells, Rallison, V-Marc 4 X 10.0 sq. mm + 2 X 6.0 sq. mm earth wire | | 21 | Supplying and fixing 63 Amp. FP MCB (10 KA) miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. complete in all respect . Make- L&T, Havells, Legrand, HPL, C&S. CAT-B | | 22 | Supplying and fixing 20 amps, 240 V, SPN industrial type , socket outlet, with 2 pole and earth metal enclosed plug top along with 20 amps 'C' series SP MCB, in sheet steel enclosure, on surface or in recess with chained matel cover for the socket outlet and complete with connections, testing and commissiong etc. as required. complete in all respect. Make- L&T, Simens, Legrand, HPL, Havells, C&S. | | 23 | S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect ,as directed at site by Engineer in charge. complete with connections, testing and commissioning etc. as required. Make- L&T, Havells , Legrand, HPL,C&S,ABB, Schnieder, Simens. CAT-B | | 24 | Supplying and fixing following ways , horizontal type three pole and neutral sheet, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powder painted including earthing etc. as required (but without MCB/ RCCB/Isolator/ MCCB) as required . complete in all respect. Make- L&T, Havells , Legrand, HPL,C&S. 4 WAY (4+12 ), Double Door | | 25 | Supplying and fixing 63 Amp. SP MCB (10 KA) miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. complete in all respect. Make- L&T, Havells, Legrand, HPL, C&S. CAT-B | | 26 | Supply & fixing of LED tube light with batten suitable for 1x22 watt LED tube light complete including tube etc on surface complete in all respect. Make- Bajaj, Philips, Osram | | 27 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Complete in all respect. Make- Anchor Roma, Havells crabtree, Philips, C&S. | | 28 | Providing and fixing M.S. Fan clamp type I or II of 16 mm dia. M.S. Bar, bent to shap with hooked ends in R.C.C slabs or beam during laying, including painting the exposed portion of loop, all as per standard design complete. Complete in all respect. | | 29 | Supply, installation, testing and commissioning of ceiling fan, including wiring the down rods of 60 cm with 1.5 sq mm FRLS PVC, insulated, copper conductor, single core cable, etc. as required. Complete in all respect | | 30 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. complete in all respect. Make- Bajaj, orient PSPO, Crompton, Havells, C&S. | | 31 | Supply & laying of 25 sq. mm x 3-1/2 core aluminium conductor XLPE armored served sheathed cable 1100 volts grade of following size at suitable depth below ground level over cushion of 75 mm thick sand alround and protected with well burnt bricks on & along the cable & back filling after digging the soil & it back filling/ on wall/ floor the cable run concealed manner, with cutting and plastering, complete in all respect as per direction of engineering incharge. The armouring of cable shall be properly connected with the earth terminal of the pole panel and as required lugs,, gland etc. Make- Gloster, Kalinga Premium, Rallision, Havells, KEI, R.R.Kable. | | 32 | Supply & laying of 16 sq mm x 4 core aluminium conductor XLPE armored served aseathed cable 1100 volts grade of following size at suitable depth below ground level over cushion of 75 mm thick sand alround and protected with well burnt bricks on & along the cable & back filling after digging the soil & it back filling/ on wall/ floor the cable run concealed manner, with cutting and plastering, complete in all respect as per direction of engineering incharge. The armouring of cable shall be properly connected with the earth terminal of the pole panel and as required lugs,, gland etc. Make- Gloster, Kalinga Premium, Rallision, Havells, KEI, R.R.Kable. | | 33 | Supplying and making end termination with aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required16 sq mm | | 34 | Supplying and making end termination with aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required25 sq mm | | 35 | Supplying and making end termination with brass compression gland for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required16 sq mm. x 4 core | | 36 | Supplying and making end termination with brass compression gland for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required25 sq mm. x 3-1/2 core | | 37 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | | 38 | Supply and fixing of two number 8 SWG copper wire in 15 dia G.I. pipe for earthing, laid in ground or in wall duly concealed including the post of cement, sand, labour, T&P other material required for proper completion of the work with 2 Nos.8 SWG copper wire. complete in all respect. | | 39 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. complete in all respect. Make- L&T, Havells, Legrand, HPL, C&S. Single pole | | 40 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. complete in all respect. Make- L&T, Havells, Legrand, HPL, C&S. Triple pole | | 41 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram / litre | | 42 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | | 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | | 44 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | | 45 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | | 46 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. | | 47 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work | | 48 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. Please Enable Macros to View BoQ information |
|