|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Dismentling of tile/granite work in floor, walls and disposal of rubbish,malwa within the lead of 50m |
| 3 | Dismentling of urinals, watercloset and wash basins disposal of rubbish, malwa within the lead of 50m |
| 4 | Dismentling of door, window , celestory including frame chowkhat stacking material within the lead of 50m of area upto 3 sqm |
| 5 | Dismentling of old plaster, skirting raking out joints and cleaning the surface for plaster including disposal of rubbish within 50m lead |
| 6 | Dismentling of CI or absestos pipes with fittings and clamps including stacking of material within 50m lead upto 100mm dia. |
| 7 | Dismentling of brickwork/RCC by hydraulic or mechanical means including disposal of unservicable material within 50m lead as per direction of engineer in charge. |
| 8 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by trolley of capacity 5 cum. ( payment shall be made for each trolley) |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 10 | Reinforced cement concrete of M20 grade 1:1.5:3 ( cement: coarse sand: aggregate) in foundation and upto V floor level for providing beam, column, slab of any thickness as per the direction of engineer in charge. |
| 11 | Providing and fixing fe 550D thermo-mechanically treated bars including cutting, bending and placing in position complete as per direction of engineer in charge. |
| 12 | centering and shuttering including proping , removal of formwork for suspended floors, column , beams, lintel etc |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 upto V floor level and foundation in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 14 | Half brick masonary with non-modular brick of class designation 7.5 upto V floor level in cement mortar 1:6 ( cement : coarse sand) |
| 15 | 12 mm cement plaster on the inner side of single or half brick wall of mix 1:4 (cement: fine sand) |
| 16 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) |
| 17 | Providing and applying rust remover and zinc-chromate primer to exposed/rusted reinforced bars |
| 18 | Providing and applying premix fosroc polymer modified mortar over chipped concrete portion with a bond coat of cement and nitobond SBR as specified by engineer in charge. |
| 19 | Providing and laying ready to use non shrink. Cementious free flow micro concrete of Compressive strength ≥ 50 MPa (28 days) according to ASTM C 109 of approved make and manufacture complete as per direction of Engineer-in-charge for replacing the carbonated part of concrete and repairing the damaged surface of concrete after fix the form work across the profile of damaged structural element. Pour the free flow non shrink. Cementious free flow micro concrete mix in the form work. Payment shall be made on the basis of consumed dry material of micro concrete mix. (Product :- Renderock RG of Fosroc/ SikaRep® Microcrete -4 of Sika / MasterEmaco S-346 of BASF or equivalent of Pidilite) With addition of aggregate |
| 20 | Rebaring/ fixing of shear connectors of new reinforcement bars for structural connections in RCC columns including power drilling holes of appropriate diameter in reinforced or plain cement concrete upto standard depth or as per specification of manufacturer, fixing the reinforcement in position using epoxy of approved make at all height level. ( Rate shall include cost of labour, T & P for power drilling in concrete, epoxy catridges, plastic nozzle etc. complete including the drilling holes and loose dust by blowing air. Reinforcement for rebar shall be paid extra.) ( Product :- Lockfix of Fosroc/ AnchorFix ® -3+ of Sika/ RE-500 of Hilti/ MasterFlow 935 AN of BASF/Fischer ) Rebar 10 mm Dia x 14 mm holes x 100mm depth |
| 21 | Providing and fixing of bamboo scaffolding including erection and necessary challis, struts all required for repair of plaster ( note : the payment shall be made for elevated area irrespective of duration of time.) |
| 22 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding,buffing,polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile as specified by engineer in charge (either antiskid/gloss) |
| 24 | Providing and laying vitrified tiles on walls in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile as specified by engineer in charge (either antiskid/gloss) |
| 25 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 26 | Providing and fixing to existing door frame 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. |
| 27 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles |
| 28 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Nano stone of 18mm thick |
| 29 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Nano stone work |
| 30 | Providing and applying 3 layer waterproofing treatment over roof after completely cleaning the roof with wirebrush and wash completely with water 1st layer consisting neat coat of cement slurry @2% by weight cement of nitobond SBR. 2nd Layer consist of Priming coat of Dr. fixit roof seal classic @ dilution of 1:3 (1 water : 3 roof seal classic). and 3rd layer consist of wearing course of Dr. fixit roofseal classic @ dilution of 10% water by weight of roofseal classic. |
| 31 | Providing and applying two or more coat of synthetic enamel anti-corrosive paint of required color and shade as specified by engineer in charge. |
| 32 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 33 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 34 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, with concealed P.V.C. flushing system S.S face plate, including flush pipe, conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Make jaquar only) |
| 35 | Providing and fixing white vitreous One piece water Closet of make jaquar with seat cover including making all connections including the cost of all fittings(faucet,jetspray etc) complete as per the direction of engineer in charge (Make jaquar only) |
| 36 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern(sensor based), with conceal fittings with face plate , standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : (Make:- jaquar only model no.-URS-WHT-13253N). |
| 37 | Providing and fixing white vitreous undercounter basin of make jaquar including making all connections , 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps) make: jaquar only |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc |
| 39 | 20mm nominal dia. |
| 40 | 25mm nominal dia. |
| 41 | 40mm nominal dia. |
| 42 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of diameter 15/20/25mm. |
| 43 | Providing, fixing and testing PVC SWR pipes, conforming to IS:13592 Type B, jointing with solvent cement or rubber ring including UPVC clamps, bends, all types of joints, cutting and making good the walls and floor, complete, excluding cost of fittings, of outer dia : |
| 44 | 75mm dia. |
| 45 | 110mm dia. |
| 46 | Providing and fixing unplasticised - PVC SWR moulded fittings/ accessories for UPVC type-B pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 47 | coupler 75mm |
| 48 | coupler 110mm |
| 49 | single tee without door 75mm |
| 50 | single tee without door 110mm |
| 51 | bend 87.5 degree 75mm |
| 52 | bend 87.5 degree 110mm |
| 53 | Providing and fixing C.P. brass long body bib cock/stop cock/push cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore |
| 54 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 55 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick water proof ply back ground fixed to rawl plugs with s.s. screws complete in all respect as per direction of Engineer in charge approved size. Make :-Saint Gobain , Modi Gaurd |
| 56 | Supplying and drawing the following size FRLS of PVC insulated copper conductor single core cable in the existing surface /recessed steel/ PVC conduit as reqd. 2x2.5sqmm |
| 57 | Supply and fixing following size/modules, GI box alongwith modular base and cover plate for modular switches in recesses etc as required. 4 module (125x75mm) |
| 58 | S/F of following sizes of heavy class PVC conduit/Batten along with all accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Size 25mm |
| 59 | S/F of suitable size G.I box with modular plate and cover in front or surface in recess including providing and fixing 25A modular socket outlet and 25A modular SP MCB \\"C\\" curve including ,painting etc |
| 60 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 61 | S/F of suitable size G.I box with modular plate and cover in front or surface in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc |
| 62 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm |
| 63 | Providing and fixing bright finished stainless steel door latch with necessary screws etc. complete of size 300x16x5mm |
| 64 | Providing and fixing stainless steel handles, ISI marked, of size 125mm design as specified by engineer in charge. Complete with necessary screw etc. |
| 65 | Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 66 | Providing and fixing both side laminated 18mm thick BWP ply wall mounted rack under the wash basin counter including necessary fasteners and screw required complete (note: for payment area of ply used is measured) |
| 67 | Providing and fixing of 36W led batten light including necessary fitting and screw complete etc of make philips. Please Enable Macros to View BoQ information |
