|
| 1 | Execution of works |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles above 25mm and upto 40 mm.[sqm] |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead and of area 3 sq. metres and below. |
| 5 | Half brick masonary with common burnt clay F.P.S. (non modular)brick of class designation 7.5 in foundations and plinth in 1:4(1 cement: 4 coarse sand).[sqm |
| 6 | \\"Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet [sqm]\\" |
| 7 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.80 mm thick with zinc coating not less than 275 gm/m²[sqm] |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm |
| 9 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, |
| 10 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete |
| 11 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer.\\" |
| 12 | \\"Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)\\" |
| 13 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position of Sal wood |
| 14 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 15 | \\"Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture[sqm]\\" |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes \\" |
| 17 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid\\" |
| 18 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps\\" |
| 19 | Provision for stitching of crack in brick masonry wall using stone, cement and sand by cutting grooves, mixing with epoxy resin, refilling with polymer-modified mortar and making good the surface complete as directed.[Rmt] |
| 20 | Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately.12mm thick |
| 21 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulatedcopper conductor singlecore cable in surface/recessed steelconduit alongwith 1 No. 4 sq. mm FRLS PVC insulatedcopperconductor single core cable for loop earthing as required. |
| 22 | Wiring for light point/ fan point/exhaust fan point/ call bell pointwith 1.5 sq.mm FRLS PVCinsulated copper conductor singlecore cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthingthe point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group A |
| 23 | Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes and fittings |
| 24 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron Por S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 25 | Providing and fixing of PVC water tank with good quality |
| 26 | Providing and fixing white vitreous china wall corner type, front urinal basin with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 27 | Supply, fitting and fixing of electrical items good quality as per prevailing local market |
| 28 | Supplying of following items for Kasomari site including for toilet accessories |
| 29 | Repairing, refixing and replacement of items of electric, electronic and plumbing all required accessories for drinking water facility |
| 30 | Provisions for reinking of old Culture notice board |
| 31 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.. 450 mm long towel rail with total length of 495 mm, 78mm wide and effective height of 88mm, weighing not less than 170 gms |
| 32 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore |
| 33 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931,15 mm nominal bore |
| 34 | Supply and fixing of 1 mirror glass |
| 35 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 36 | Providing and fixing PTMT pillar cock good quality |
| 37 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 38 | Providing and fixing shower with arm good quality |
| 39 | Providing and fixing P.V.C waste pipe for sink or wash basin |
| 40 | Fixing of new existing water tank stand at required position including alignment, levelling, tightening of anchor bolts/supports, minor repair to base if required, making good the disturbed portion, and all complete as per direction of Engineer-in-Charge. |
| 41 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 42 | Repairing of existing solar light including checking, servicing and replacement of defective components such as LED lamp, battery, charge controller, wiring and connectors, complete in all respects and in working condition |
| 43 | Repairing of existing seating benches including tightening and replacement of loose or damaged members, minor welding, painting, replacement of damaged bolts and nuts, surface cleaning and making the bench functional, complete in all respects |
| 44 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of colums, etc. for mass concrete |
| 45 | Steel reinforcement for R.C.C work including straightening, cutting, bending,placing in position and binding all complete upto plinth level. mild steel and Medium Tensile steel bars |
| 46 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level:1:2:4(1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 47 | Provision for 1 No PNB, 1No of Do & don't Boards and refixing of signage board etc. Please Enable Macros to View BoQ information |