|
| 1 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc not exceeding 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard / dense soil etc complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard dense soil etc complete all as specified and as directed. |
| 3 | Removing excavated material n.exc, 50 m and depositing where directed at a level n.exc, 1.5m above the starting point etc complete all as specified and as directed. |
| 4 | M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders etc complete all as specified and as directed |
| 5 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed. |
| 6 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, padding, sunken, coping portion rounded chamfered on edge etc., complete all as specified and directed |
| 7 | M&L Precast cement concrete block masonry exc 10cm in width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) etc complete all as specified and as directed. |
| 8 | M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 etc complete all as specified and as directed. |
| 9 | M&L for pre cast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs, shelves and similar articles set in cm 1:6 finished even and smooth with necessary form works etc complete all as specified and as directed. |
| 10 | M&L providing precast cement concrete solid building blocks PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 in walls complete all as specified |
| 11 | M&L for Reinforced cement concrete Type B1 1:2:4 using 20mm graded aggregate as in foundations/footings, plinth beams, bases for column, etc., complete all as specified and as directed. |
| 12 | M&L for Reinforced cement concrete Type B1 1:2:4 using 20mm graded stone aggregates as in lintel beams, roof beams, chajjas etc complete all as specified and directed |
| 13 | M&L for Reinforced cement concrete Type B1 1:2:4 using 20mm graded stone aggregates as in columns, pillers etc complete all as specified and as directed. |
| 14 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc complete all as specified and as directed. |
| 15 | M&L form work to sides of concrete foundations, footings, raft and raft beams, sides and soffits of foundatrion and plinth beams and similar work for rough flat surfaces etc complete all as specified and as directed. |
| 16 | M&L form work to lintel beams, roof beams, chajjas and similar works for rough finished flat surfaces of concrete etc complete all as specified and as directed. |
| 17 | M&L form work to sides of columns and similar works for rough finished flat surfaces of concrete etc complete all as specified and as directed. |
| 18 | Taking down Aluminium windows or door area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and as directed. |
| 19 | Taking down Aluminium Windows, or door frames with shutters without taking off shutters from frames exe 1.5 Sqm and n.exc 4 Sqm each etc complete all as specified and as directed. |
| 20 | S&F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing etc complete all as specified and as directed. |
| 21 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing etc complete all as specified and as directed. |
| 22 | S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification etc complete all as specified and as directed. |
| 23 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing etc complete all as specified and as directed. |
| 24 | S&F 150mm aluminium powder coated barrel tower bolts of extruded section etc complete all as specified and as directed. |
| 25 | S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and as directed. |
| 26 | S&F 300mm long Aluminum alloy powder coated sliding door bolt with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded section or cast aluminum alloy etc complete all as specified and as directed. |
| 27 | S&F 100 mm Butt hinges type B-21 extruded aluminium alloy with galvanized mild steel hinge pin anodized etc complete all as specified and as directed. |
| 28 | S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised etc complete all as specified and as directed. |
| 29 | S&F 150mm long extruded aluminum alloy handle fabricated type anodized etc complete all as specified and as directed. |
| 30 | S & F brass body 4 levers vertical/ round type mortice night latch of size 100mm etc complete all as specified and as directed. |
| 31 | S & F in repairs Brass chromium plated towel rail, 20mm dia D-type, 60cm long between flanges etc complete all as specified. |
| 32 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate etc complete all as specified and as directed. |
| 33 | S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed. |
| 34 | S&F in repairs aluminium (dia cast) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 35 | Supply only Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. |
| 36 | S & F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and as directed. |
| 37 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including crancking, bending spirally hooping for columns, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia etc complete all as specified and as directed. |
| 38 | Mild steel TMT bars 5mm dia and up to 10mm dia as in stirrups, cut to length, bent to shape requiried, including brancking, bending spirally hooping for columns, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia etc complete all as specified and as directed. |
| 39 | S&F for mild steel works in staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. and similar conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed. |
| 40 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A etc complete all as specified and as directed. |
| 41 | S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A etc complete all as specified and as directed. |
| 42 | M&L for aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 43 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and their shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 44 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 45 | S&F powder coated aluminium grill according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening etc complete all as specified and as directed. |
| 46 | S&F for Powder coated aluminium snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections main tee 36.5X25X1.4mm, cross 23.5X26.4X1.4mm, angle 25X25x1.4mm including cutting, drilling jointing etc complete including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size Specified by Engr-in-charge and making good etc complete all as specified and as directed. |
| 47 | S&F for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement etc complete all as specified and as directed. |
| 48 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 49 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws etc complete all as specified and as directed. |
| 50 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories etc complete all as specified and as directed. |
| 51 | M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work or doors etc complete all as specified and as directed. |
| 52 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work etc complete all as specified and as directed. |
| 53 | M&L for 16-18mm thick granite of approved quality machine cut polished, bedded and jonted with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cooking platform, counter of WHB and like over and including 15mm thick screed bed in CM 1:4 including grinding/chamfering and polishing the edges etc complete all as specified and as directed by Engr-in-Charge |
| 54 | M&L for 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer etc complete all as specified and as directed |
| 55 | M&L for PCC type D-2, 1:4:8 (using 40mm graded aggregate) 75mm thick as in sub floor, sub base floor and pavings etc complete all as specified and as directed |
| 56 | M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/ 300x450x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 etc complete all as specified and as directed |
| 57 | M&L for Non Skid coloured ceramic tiles (300x300mm) 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 etc complete all as specified and as directed |
| 58 | M&L for Non Skid coloured ceramic tiles (600x600mm) 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 etc complete all as specified and as directed |
| 59 | All as per item No 58 above, but , as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, etc complete all as specified and as directed. |
| 60 | M&L chequered Cement concrete tiles 30cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed etc complete all as specified and as directed by Engr-in-Charge. |
| 61 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed. |
| 62 | M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 63 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of water proofing compound, finished the surface even and smooth without using extra cement etc complete all as specified and as directed. (Note: Water proofing compound shall be measured and paid separately) |
| 64 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 65 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer etc complete all as specified and as directed. |
| 66 | M&L for preparation of newly plastered Internal wall surface and applying two coats of distemper oil emulsion over a coat of primer over the coat of 1mm thick wall care putty etc complete all as specified and as directed. |
| 67 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of average 2mm thick wall care putty on wall etc complete all as specified and as directed. |
| 68 | M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm etc complete all as specified and as directed. |
| 69 | M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm etc complete all as specified and as directed. |
| 70 | Supply only sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane etc complete all as specified and as directed. |
| 71 | Supply only sheet glass 5.5mm thick ordinary quality and glazing with aluminium glazing clip in aluminium door/window/ventilator shutter not exc 0.5 Sqm in each pane etc complete all as specified and as directed. |
| 72 | Supply only sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter exc 0.5 Sqm in each pane etc complete all as specified and as directed. |
| 73 | Supply only plain sheet glass 5.5 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane etc complete all as specified and as directed. |
| 74 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described etc complete all as specified and as directed. |
| 75 | M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described etc complete all as specified and as directed. |
| 76 | Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site etc complete all as specified and as directed. |
| 77 | Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site etc complete all as specified and as directed. |
| 78 | S&F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed. |
| 79 | S&F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed. |
| 80 | S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required etc complete all as specified and as directed. |
| 81 | S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required etc complete all as specified and as directed. |
| 82 | Dismantling PVC water tanks exc 500 Ltr but n. exc 1000 Ltr capacity and removing to store etc complete all as specified and as directed. |
| 83 | S&F Rotational moulded Polyethylene [HDPE] Water Tanks, double Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including supply and fixing 25mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe etc complete all as specified and as directed. |
| 84 | S&F in repair 15mm dia cast copper alloy chromium plated long body bib tap fancy type with wall flange etc complete all as specified and as directed. |
| 85 | S&F in repair 15mm dia cast copper alloy, chromium plated pillar tap long body swan neck type with fly nut capstan head screwed for 15mm bore dia of pipe etc complete all as specified and as directed. |
| 86 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls or in floors including fitting with PVC Clamp if required etc complete all as specified and as directed. |
| 87 | S&F in repairs 25mm dia bore pipe Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as required etc complete all as specified and as directed. |
| 88 | S&F in repair 15mm angular stop cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union etc complete all as specified and as directed. |
| 89 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls or in floors including fitting with PVC Clamp if required etc complete all as specified and as directed. |
| 90 | S&F for concealed stop valves 15 mm dia cast copper alloy fancy type CP with long shank and cup and crutch or capstan headscrewed down high pressure screwed both ends for iron pipe or for unions, etc complete all as specified and directed by Engr -in- charge. |
| 91 | S&F for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends suitable for PVC pipes etc complete all as specified and as directed. |
| 92 | S&F in repairs 20mm dia bore pipe Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms) etc complete all as specified and as directed. |
| 93 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer etc complete all as specified and as directed. |
| 94 | S&F for PVC connection 15 mm dia and 600 mm long with both and nuts etc complete all as specified and as directed. |
| 95 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors etc complete all as specified and as directed. |
| 96 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors etc complete all as specified and as directed. |
| 97 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall etc complete all as specified and as directed. |
| 98 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls etc complete all as specified and as directed. |
| 99 | S&F PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive etc complete all as specified and as directed. |
| 100 | S&F PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive etc complete all as specified and as directed. |
| 101 | S&F PVC (SWR) 110mm dia junction single (single T) equal or unequal reducer 'T' 110mm to 75mm dia and jointed with approved adhesive etc complete all as specified and as directed. |
| 102 | S&F PVC (SWR) vent cowl 110mm dia jointed with approved adhesive etc complete all as specified and as directed. |
| 103 | S&F 75mm outlet dia PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe etc complete all as specified and as directed. |
| 104 | Supply and fixed in repairs vitreous china wash down water closet pan (pedestal pattern ) white, including connection to drain (or out going pipe) and to flush pipe, antisyphonic (excluding flushing cistern and flush pipe) etc., complete all as specified and directed |
| 105 | S&F for of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. |
| 106 | S&F for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified |
| 107 | S&F for PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets etc complete all as specified and as directed. |
| 108 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and as directed. |
| 109 | S&F for ABS chromium plated shower rose long arm with or without swivel joint any size including fixing to steel pipe or union, of size 125mm etc complete all as specified and directed by Engr -in- charge. |
| 110 | S&F flush pipe of polyethylene of low or high density or PVC 32 mm dia flexible pipe suitable for WHB/sink/urinal etc complete all as specified and as directed. |
| 111 | S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections etc complete all as specified and as directed. |
| 112 | S&F in repair 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner etc complete all as specified and as directed. |
| 113 | Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete etc all as specified and as directed. |
| 114 | Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar etc complete all as specified and as directed. |
| 115 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) etc complete all as specified and as directed |
| 116 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed. |
| 117 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed. |
| 118 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed. |
| 119 | Dismantling structural steel work etc complete all as specified and as directed. |
| 120 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings etc complete all as specified and as directed. |
| 121 | Supply only integral water proofing compound complete all as specified and directed |
| 122 | S&F 100mm size stainless steel butt hinges medium weight etc complete all as specified and as directed. |
| 123 | S&F for Two way Bib Cock etc complete all as specified and as directed. JAQUAR Code : ACN-CHR-1193N1 or equivalent in GEM / MARC(ORIENTAL) / PRAYAG/ LEADER/ PARRYWARE |
| 124 | S&F for CP two way bib taps 15mm cast copper alloy fancy type with crutch or capstan head handle screwed down for Iron pipe and fixed etc complete all as specified and directed. (Make : Prayag Cat Part No PIS-12 H or Equivalent equivalent in GEM / MARC(ORIENTAL) / JAQUAR/ LEADER/ PARRYWARE) |
| 125 | S&F for Hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook etc complete all as specified and as directed.(Make Prayag Cat Part No. BEA-41 or Equivalent in PARRYWARE / JOHNSON / HINDWARE /JAQUAR) |
| 126 | S&F for CP Angular stop cock 20 mm dia fancy type with crutch or capstan head handle screwed down for Iron pipe and fixed etc complete all as specified and directed. (Make :Prayag Cat No. PIS-10 H or equivalent in GEM / MARC(ORIENTAL) / JAQUAR/ LEADER/ PARRYWARE) |
| 127 | M&L for Aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering etc fixed with self tapping screws as specified. |
| 128 | Supply only plain sheet glass 5 mm thick black colour ordinary quality and glazing with aluminum glazing clip in aluminum door shutter/ partition exc 0.5 Sqm in each pane. |
| 129 | M & L for 18mm thick HDF boarding (Fire & water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site , complete all as specified and as directed by Engr-in-Charge. Make : Bajaj/ Kitply/Greenply/ Bhutan Board.Note : (i) Cutting edges of cupboard shutter/ shelves to be finished with adhesive edge binding tape all as directed. |
| 130 | S & F stainless steel auto closing hinges of standard size. |
| 131 | S & F stainless steel 150mm cupboard handles |
| 132 | S & F Magnetic door catcher for cup board |
| 133 | S & F stainless steel 100mm tower bolt |
| 134 | S&F for wall mounted Sink cock with extended swinging spout complete all as specified. Make : Jaguar Cat Part No - CHR-5347SD or Equivalent in GEM/ PRAYAG |
| 135 | S&F Stainless Steel non megnetic 304 grade wire Basket of pull out type like plate/cup & saucer /bottle/ multi purpose/2-3 shelf baskets etc for kitchen cabinates etc of required size complete all as specified. |
| 136 | Dismantling and refixing of existing (600mm x 600mm) Snap grid false ceiling for filling the gaps between roof sheets and wall as a coping with PCC including scafolding complete all as specified and directed. |
| 137 | M&L for dismantling and refixing of Galvalume Sheets including Screws/Valley Gutters for gap filling between Roof sheets and block wall including formwork complete all specified and directed. Note: Retrived material from dismantling to be re-used. Please Enable Macros to View BoQ information |