|
| 1 | Supply of Stores at FOR, Shifting of Stores from FOR to Worksite and Construction of Svl Bkr (Elevated) as per design/drawing attached including all accessories and provn of earthing & lightning arrester system complete. (Note Quantities mentioned against each items are for total quantity required for execution of 7 x Nos Svl Bunker (DS). |
| 2 | 20 mm dia TMT bar as per IS 1786-1979, Make- TATA/ SAIL/JINDAL or equivalent to IS 1786-2008 |
| 3 | 16 mm dia TMT bar as per IS 1786-1979, Make- TATA/ SAIL/JINDAL or equivalent to IS 1786-2008 |
| 4 | 12 mm dia TMT bar as per IS 1786-1979, Make- TATA/ SAIL/JINDAl or equivalent to IS 1786-2008 |
| 5 | 10 mm dia TMT bar as per IS 1786-1979, Make- TATA/ SAIL/JINDAL or equivalent to IS 1786-2008 |
| 6 | MS Binding wire 0.90mm dia |
| 7 | MS hand railing for stair case with 40mm MS pipe (medium grade) as hand rail and 10mm square bar as railing with two coat of synthetic enamel paint over a coat of red oxide. |
| 8 | Machine cut kota stone slab flooring 20-25mm thick including rubbing and polishing complete. |
| 9 | White Cement. Make : Birla White/ACC/Ambuja/JK Lakshmi.or equivalent |
| 10 | Integral Water proofing compound use as per manufacturer instruction. |
| 11 | HDPE sand bags of size 840 x 360mmand weight of each bag not less than 75 gm colour Khaki conforming to IS -14252-2015. |
| 12 | Oil Based Distember (OBD) in paste form |
| 13 | Cement Base Paint |
| 14 | Primer (Internal surface) |
| 15 | Primer (External surface) |
| 16 | PBS roll |
| 17 | HDPE film (500 micron) |
| 18 | Paint Brush. 100mm long brush and 10mm wide |
| 19 | Switch piano type 5 Amps, ISI marked Make: Anchor by panasonic/legrand /Havells or equivalent to IS 3854-1987 |
| 20 | Switch socket comb 5 Amps, ISI marked Make: Anchor by panasonic/legrand /Havells or equivalent to IS 1293-2005 |
| 21 | Switch socket comb 15 Amps, ISI marked Make: Anchor by panasonic/legrand /Havells or equivalent to IS 1293-2005 |
| 22 | Shade conical vitreous enameled 250mm dia |
| 23 | PVC ceiling rose not less than 63.5mm dia |
| 24 | PVC 4\\"x4\\"x2\\" depth |
| 25 | PVC rigid conduit pipe 25mm dia, med grade ISI marked make D- Past /Optima/AKG/or equivalent to IS 9537(3) -1983 |
| 26 | PVC conduit saddle for 25mm dia pipemake D- Past /Optima/AKG/or equivalent to IS 3837-1996 |
| 27 | CP screw assorted |
| 28 | PVC 'L' bend 25mm dia make D- Past /optima /AKG or equivalent to IS 3837-1996 |
| 29 | Main switch 16 AMP 250V, DP.Make: Anchor by panasonic/legrand /Havells or equivalent to IS 3854-1987. |
| 30 | PVC box 8\\"x4\\"x2\\" depth |
| 31 | Pendent holder bakelite. |
| 32 | LED Bulk head light 10 W with fittings. Make:- PHILIPS/HAVELLS/SYSKA or Equivalent to IS 10322 Part 5 of 2012. |
| 33 | Insulation tape 10mtr long and 2cm wide Make: Steel/Grip/Anchor or equivalent to IS 7809(2)-1977 |
| 34 | Cable PVC insulated 1.50sqmm single core aluminium conductor. Make: Finolex/Hevells/Polycab or equivalent to IS 694-2010 |
| 35 | Flexible wire 23/76 ISI marked Make: Finolex/Hevells/Polycab or equivalent to IS 694-2010 |
| 36 | LED Eco Lamp 6500K 9 Watt suitable for angle holder complete of |
| 37 | LED tube light fittings of 18/20W strip batten fittings as reqd complete Make : Philips//Surya/Syaka/ or equivalent to IS 16103(I)-2012 |
| 38 | Wall mounting fan with electric regulator Make: Usha/Khaitan/Bajaj ISI marked or equivalent to IS 2997-2000 |
| 39 | MS single bunk bed. MS single bunk bed. MS single bunk of size 1.95 x 0.95 x 0.45m using 32mm dia (M) GI tube frame , 12mm thick plywood top including 0.90mtr shoe rack hanging beneath the bed from one end of good quality. Cushion having density of 32kg/cum and 35mm thick. All steel conforming to Make:TATA/SAIL/JINDAL/RINL or equivalent to IS 808-1984. |
| 40 | Mild steel prefabricated door with shutter (single leaf) of size 0.90x1.80mtr with all fittins and fixturesfixed to angle Iron frame of 50x50x6mm and thethickness of sheet should be 6mm incl two coats of synthetic enamel OG paint over a coat of red oxide primer complete.Make:TATA/SAIL/JINDAL/RINL or equivalent to IS 808-1984. |
| 41 | MS prefabricated loop hole with shutter of size 0.75x0.45mtr of MS sheet thickness 6mm fixed to angle iron frame of 50x50x6mm including all fittings and fixtures incl two coats of synthetic enamel OG paint over a coat of red oxide primer complete Make:TATA/SAIL/JINDAL/RINL or equivalent to IS 808-1984. |
| 42 | Steel ladder made out of MS angle iron 50x50x6mm of length 2.70mtr with tread 500mm length of angle iron 45x45x5mm at 265mm c/c with two coat of OG color paint over a coat of primer. |
| 43 | MS Steel window of sliding type of size 1.20x0.90mtr with sliding arrangement with welded grills and fittings all as directed. Make:TATA/SAIL/JINDAL/RINL or equivalent to IS 808-1984. |
| 44 | Earthing Material.(a) Finished GI plate 600mm x 600mmx 6mm thick - 01 Nos(b) GI wire 4 mm dia - 15m(c) Cast Iron cover of size 300 x 300 x 6mm with angle iron 30 x 30 x 6mm frame with locking arrangement as allen key - 01 Nos(d) Charcol - 25 Kg(e) Common Salt - 25 Kg(f) GI pipe 20mm dia, 2m long - 01 Nos(g) Nuts and bolts size No 12-04 Nos |
| 45 | Lightening Arrestor System.Prefabricated gel earthing electrode of pipe in pipe technology with two B class MS pipes on inside the other, hot dip galvanised with 100 micron thick coating outside and above 300 micron thick coating inside, filled with high conductor and corrosion resistant crystalline maxture and back fill compound all around the electrode all as per IS-3043/1987 include fwg :-(a) Lightening rod (earthing electrode) - 01 Nos 1.9 mtr long(b) Back fill compound base - 01(c) CI manhole cover of size 300mm x 300mm x 10mm hinged to CI frame (50mm x 50mm x 6mm) - 01 Nos(d) Aluminium strip 25 x 3.15mm. RM - 09(e) GI Strip 25 x 6mm, RM - 03(f) Iron spike 18\\" long - 03 Nos(g) GI reducer 40mm x 15mm - 01 No, GI nipple 15mm dia and 150mm long - Nos 01(h) Lightening terminal copper with 05 Nos prongs and 15cm long(j) MS clamp 40x2mm with nut and bolt complete, Nos 05(k) GI wire 12 guage, 05 Kg(l) GI pipe 40mm medium grade, ISI Marked,Make SAIL.JINDAL/TATA or equivalent to IS 1239 with Threading & Socket Complete. RM - 06(m) Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed incl 3 Nos 8mm dia 25mm long hex head screw. |
| 46 | Cement of 43 grade OPC conforming to IS 8112/1989 in sealed bags each weighting 50 Kgs. The date of manufacture of cement should not be more than one month prior to the date of delivery. Make : JK Laxmi/ACC/Ambuja/Ultratech or Equivalent to IS 8112/1989 |
| 47 | PCC Bricks of size 230mmx115mmx75mm with min str of M 15 and conforming to IS-456 of 1978 |
| 48 | Clean coarse river sand conforming to IS 2116-1980 |
| 49 | Aggregate 40-63mm graded confirming to IS 383-1970 |
| 50 | Aggregate 20mm graded confirming to IS 383-1970 |
| 51 | Aggregate 40mm graded confirming to IS 383-1970 |
| 52 | Transportion, Shifting of store from FOR to worksite Labour charge, Tools & Plants and other misc charges complete requried for construction of 07 Nos Svl Bunker (DS) Please Enable Macros to View BoQ information |