|
| 1 | Disconnecting and dismantling of unserviceable centrifugal pump set 150 HP of Kirloskar make Model No DSM 150-46, from pre-existing foundation complete with inlet/ outlet attachment and transporting to authorised dealer/ reputed workshop and reassembling complete unit after replacement of defective spares including machining of shaft as desired / required to ensure proper alignment with provisioning of commissioning / testing of pump set to the entire satisfaction of Engr in charge. Note :- (i). Any adjustment in the pump set if required, the same shall also be carried out by the contractor without any extra payment. (ii). Any damage to the pump set occurs due to improper installation of motor, the contractor shall be liable for repair at his own cost. |
| 2 | Supply only following spare parts suitable for centrifugal pumps set of Kirloskar make to incorporate in item No. 1 above, complete all as directed by Engr-in-Charge :-(a) CI impellor suitable for 150 HP capacity |
| 3 | (b) Pump shaft suitable for 150 HP capacity |
| 4 | (c) Adjustable washer suitable for 150 HP capacity |
| 5 | (d) Oil seal (DE & NDE) suitable for 150 HP capacity |
| 6 | (e) ‘O’ ring suitable for 150 HP capacity |
| 7 | (f) Distance sleeve suitable for 150 HP capacity |
| 8 | (g) Key for impellor and coupling suitable for 150 HP capacity |
| 9 | (h) Bearing lock nut suitable for 150 HP capacity |
| 10 | (j) Shaft sleeve/bush |
| 11 | (k) Shaft key as per sample |
| 12 | (l) Ball Bearing |
| 13 | (m) Roller Bearing |
| 14 | (n) Bearing housing MS |
| 15 | (o) Gland plates MS (As per sample) |
| 16 | Disconnecting and dismantling of unserviceable centrifugal pump set 120 HP of Kirloskar make Model No UP 150-45, from pre-existing foundation complete with inlet/ outlet attachment and transporting to authorised dealer/ reputed workshop and reassembling complete unit after replacement of defective spares including machining of shaft as desired / required to ensure proper alignment with provisioning of commissioning / testing of pump set to the entire satisfaction of Engr in charge. Note :- (i). Any adjustment in the pump set if required, the same shall also be carried out by the contractor without any extra payment. (ii). Any damage to the pump set occurs due to improper installation of motor, the contractor shall be liable for repair at his own cost. |
| 17 | Supply only following spare parts suitable for centrifugal pumps set of Kirloskar make to incorporate in item No. 1 above, complete all as directed by Engr-in-Charge :-(a) CI impellor suitable for 120 HP capacity of Kirloskar make Model No UP 150-45 Pump Set |
| 18 | (b). Pump shaft suitable for 120 HP capacity of Kirloskar make Model No UP 150-45 Pump Set |
| 19 | (c). Adjustable washer suitable for 120 HP capacity of Kirloskar make Model No UP 150-45 Pump Set |
| 20 | (e). Oil seal (DE & NDE) suitable for 120 HP capacity of Kirloskar make Model No UP 150-45 Pump Set |
| 21 | (f) ‘O’ ring suitable for 120 HP capacity of Kirloskar make Model No UP 150-45 Pump Set |
| 22 | (g) Distance sleeve suitable for 120 HP capacity of Kirloskar make Model No UP 150-45 Pump Set |
| 23 | (h) Key for impellor and coupling suitable for 120 HP capacity of Kirloskar make Model No UP 150-45 Pump SetPump Set |
| 24 | (j) Bearing lock nut suitable for 120 HP capacity of Kirloskar make Model No UP 150-45 Pump Set |
| 25 | (k) Shaft sleeve/bush |
| 26 | (l) Ball Bearing |
| 27 | (m) Roller Bearing |
| 28 | (n) Gland plates MS (As per sample) |
| 29 | Repair / replacement, disconnecting and dismantling and overhauling of centrifugal pump set 75 HP of Kirloskar make Model No DSM100 from motor side inlet, outlet pipes lines for carrying out repairs including machining of shaft as desired / required to ensure proper alignment from authorised dealers of Kirloskar and including spare parts and testing and commissioning after repairs for improved and satisfactory performances, complete all as per manufacturer's instructions. Note:- New spares required for replacement will be measured and paid separately under respective items of BOQ. |
| 30 | Supply only following spare parts suitable for centrifugal pumps set of Kirloskar make to incorporate in item No. 5, complete all as directed by Engr-in-Charge:-a) Ball bearing suitable for 75 HP pump make Kirloskar or equivelent |
| 31 | b) Bearing Ring suitable for 75 HP pump make Kirloskar or equivelent |
| 32 | c)Sleeves/bush suitable for 75 HP pump make Kirloskar or equivelent |
| 33 | d) Oil seal suitable for 75 HP pump make Kirloskar or equivelent |
| 34 | e) shaft Key-suitable for 75 HP pump |
| 35 | f) Machining to bronz impellor-01Job |
| 36 | g) Roller bearing suitable for 75 HP pump |
| 37 | Repair / replacement and dismantling and taking down for overhauling of Jockey pump set capacity 20 HP, of M/S Kirloskar Ltd make, with and including provision of replacement of following defective parts and re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance to the entire satisfaction of Engr-in-Charge:-(a) Bronze impellar suitable for 20 HP pump set(b) Ball bearing suitable for 20 HP pump set(c) Bronze bush suitable for 20 HP pump set |
| 38 | Repair/replacement and dismantling and taking down for overhauling of centrifugal pump set Capacity 30/40 HP, of M/S Kirloskar Ltd/ Becon make with and including provision of replacement of following defective parts and re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance to the entire satisfaction of Engr-in-Charge:-(a) Bronze impellar suitable for 30/40 HP pump set.(b) Ball bearing suitable for 30/40 HP pump set(c) Bronze bush suitable for 30/40 HP pump set |
| 39 | Repair/replacement and dismantling and taking down for overhauling of centrifugal pump set Capacity 12.5/15HP, of M/S Kirloskar Ltd/ Becon including provision of replacement of following defective parts all as required.(a) Michining Bronze impellar for 12.5/15HP HP pump set.(b) Ball bearing suitable for 12.5/15HP HP pump set(c) Bronze bush suitable for 12.5/15HP HP pump setReassambling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance all as desired to the entire satisfaction of dept. |
| 40 | Repair/replacement and dismantling and taking down for overhauling of pump set Capacity 7.5/10HP, of M/S Kirloskar Ltd / Becon make with and including provision of replacement of following defective parts and re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance to the entire satisfaction of Engr-in-Charge:-(a) Machining Bronze impellar suitable for 7.5/10HP HP pump set.(b) Ball bearing suitable for 7.5/10HP HP pump set(c) Bronze bush suitable for 7.5/10HP HP pump set Please Enable Macros to View BoQ information |
| 41 | Repair/replacement and dismantling and taking down for overhauling of pump set Capacity 7.5/10HP, of M/S Kirloskar Ltd / Becon make with and including provision of replacement of following defective parts and re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance to the entire satisfaction of Engr-in-Charge:-(a) Machining Bronze impellar suitable for 7.5/10HP HP pump set.(b) Ball bearing suitable for 7.5/10HP HP pump set(c) Bronze bush suitable for 7.5/10HP HP pump set Please Enable Macros to View BoQ information |