|
| 1 | Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding removing rubbish of the premises complete all as specified and directed. |
| 2 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. |
| 3 | Demolition of cement concrete (un-reinforced) as in sunken floors, paving and any in position and any thickness upto seven story building including removal of rubbish out side complex (MOD land) , complete all as specified and directed. |
| 4 | Dismantling of brick tiles or terracing tiles single layer on roof complete all as specified & directed. |
| 5 | Demolition of mud phuska on roof slabs, any thickness incl cleaning of roof surfaces and removing the debris upto the distance exc. 1.00Km but n. exc. 1.5Km complete all as spd & directed. |
| 6 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 7 | Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed. complete all as specified and directed. |
| 8 | M&L for coloured glazed ceramic tiles in vertical surfaces 600x600x7 /450x350x7mm thick joint free as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar 1:4 on brick wall of concrete surfaces and finished fair and even complete all as specified and directed. |
| 9 | M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 10 | M&L for vitrified double charged light coloured joint free tiles 600x600x 10 mm thick (square/rectangular) polished , area of each tile n exc 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and directed. |
| 11 | Ditto as per item No 10 above but on vertical surfaces of wall over & incl CM(1:4) 10mm thick cement plaster etc. comnplete all as specified and directed. |
| 12 | Scraping of old tar felt roof treatment over concrete padding of any thickness etc from roof incl finishes or junction or parapet and cleaning the surface (by mechanical means like grinder, etc) complete all as spd & directed. |
| 13 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) on roof padding, kerb or mud slops, rounded or chamfered on edges, coping, kneelers, kerb water tough and the like incl weathering, slightly rounded or chamfered angleswith water proofing compound surface finished even and smooth without using extra cement complete all as spd & directed. (Rate of WPC shall be included in unit rate) |
| 14 | M&L for water proofing treatment to roof surface with APP polymeric based water proofing membrane 3mm thick & weighing not less than 3.5 Kg/Sqm of approved make black finish consisting of a central core of high molecular high density polyethylene film (HMHDPF) & reinforced with non woven polyester matt of min 160 gm/sqm with a thermo fusible finish laid over a coat of hot blown bitumen of 85/25 grade conforming to IS 702 @ 1.2 kg/sqm over a coat of an bitumen primer conforming to IS-3384 @0.4 Ltr/Sqm over prepared roof surfaces, forcing overlap with a propane or butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing incl applying a coat of cold emulsion bituminous primer complete as per manufacturer's instructions complete all as spd & directed. (Make Super thermolay manufactured by STP Ltd or 'Hyper Plas' (Polyster) manufactured by M/S IWL Ltd or 'Shalipals' (polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd)Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only.2. Bitumen primer, bitumen and membrane shall be of same make / manufacturer.3. The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65mm X 50mm size & making good in CM 1:3. |
| 15 | M&L for plain cement concrete tiles 25cm x 25cm x 22mm thick laid on cement mortar screed bed at roof top and incl joints grouted flush and pointing in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed. (Note: Work be done through applicator approved) |
| 16 | Supply only Liquid water proofing compound, complete all as specified and directed. |
| 17 | M&L for reinforced cement concrete Nominal Mix using type B-1, 1:2:4 (20mm graded stone aggregate) as in kitchen slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items) |
| 18 | M&L for 18-20 mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including 15mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing and rounding of edges complete all as specified and directed. |
| 19 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 20 | Dismantling of 100 mm dia Cast Iron pipe (Soil/waste/vent) with fittings from walls, on floors & from trenches if required including taking out any type of joints complete all as specified and directed. |
| 21 | All as per item No. 20 above but 75mm dia. complete all as specified and directed. |
| 22 | Taking up or down GI tubing 15mm bore and connections including all fittings complete all as specified and directed. |
| 23 | All as per item No. 22 above but 20 mm bore . complete all as specified and directed. |
| 24 | All as per item No. 22 above but 40 mm bore . complete all as specified and directed. |
| 25 | All as per item No. 22 above but 50 mm bore . complete all as specified and directed. |
| 26 | Supply and apply a glass fibre reinforced acrylic modified cementitious coating system.Prepration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementitious coating system as top coat over reinforcement over base coat etc supply and apply a protection plaster (12-15 mm) admixed withappropriate integral waterproofing compound @ 0.10 kg per bag of cement. The product should conforms to IS 2645. Cleaning of RCC surface to remove dust, loose particles grinding any sharp edges including M&L for sealaing of pipe penetration of toilets core cutting in the following stages:- Supply and apply solvent free, moisture insensitive epoxy resin based patch repair putty on pipe penetration surfaces. The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joint to concrete complete all as specified and directed. |
| 27 | M&L for Cement concrete 1:5:10 type E2 (using 40mm graded aggregate) as in filling in sunken floors of toilets complete all as specified and directed. |
| 28 | M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, mass filling, sub base and the like all as specified. |
| 29 | M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed. |
| 30 | S&F 100 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed. |
| 31 | All as per item No 30 but fixed to walls. complete all as specified and directed. |
| 32 | S&F 75 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed. |
| 33 | All as per item No 32 but fixed to walls. complete all as specified and directed. |
| 34 | S&F 100 mm dia (bore of pipe) cast iron bends,Tee, diminishing pieces or tapers with cement joint fixed complete all as specified and directed. |
| 35 | All as per item No. 34 above but 75mm dia (bore of pipe) complete all as specified and directed. |
| 36 | S&F 100 mm dia (bore of pipe) cast iron with oval access door bends ,Tee, diminishing pieces or tapers with cement joint fixed to walls complete all as specified and directed. |
| 37 | All as per item No. 36 above but 75mm dia (bore of pipe) complete all as specified and directed. |
| 38 | S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed. |
| 39 | S&F 100mm bore cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed. |
| 40 | S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed. |
| 41 | S&F 100mm bore cast iron socket (double) collars with cement joint complete all as specified and directed. |
| 42 | S&F 75mm bore cast iron socket (double) collars with cement joint complete all as specified and directed. |
| 43 | S&F 100mm bore cast iron sanitary connection socket to fit WC out-let complete all as specified and directed. |
| 44 | S&F CI floor trap long arm including jointing to waste pipe in run lead with dia of outlet 75mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified and directed. |
| 45 | S&F spun CI floor trap long arm with grating including jointing to waste pipe in run lead with dia of outlet 100 mm including floor around to required depth and burning lead joints etc complete all as specified and directed. |
| 46 | S&F in repair stack clamps for 75mm bore CI pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall complete all as specified and directed. |
| 47 | All as per item No. 46 above but 100 mm bore CI Pipe. complete all as specified and directed. |
| 48 | Taking down PVC pipe, eaves and gutters (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 49 | S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including all necessary fitting,extra joints and stack clamps stay including bolts and nuts complete all as specified and directed |
| 50 | S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 51 | M & L for cutting chases, pinning in brick wall for concealed GI pipe , cutting n.exc 10cm girth and making good to facings where required and pointing in cement mortar 1:3, complete all as specified and directed. |
| 52 | S&F GI tubing 15mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 53 | S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 54 | All as per item no. 53 above but except pipe. complete all as specified and directed. |
| 55 | S&F GI tubing 50 mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 56 | All as per item no. 55 above but except pipe. complete all as specified and directed. |
| 57 | S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings including all fitting on walls/ceiling or laying in floors complete all as specified. |
| 58 | S&F 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings including all fitting on walls/ceiling or laying in floors complete all as specified. |
| 59 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete screwed for pipe complete all as specified and directed. |
| 60 | S&F in repair 50mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete screwed for pipe complete all as specified and directed. |
| 61 | S&F in repair 32mm dia and 90 cm long PVC waste pipe complete all as specified and directed. |
| 62 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified and directred. |
| 63 | S&F 500 ltrs capacity rotationally moulded polythene water storage tanks (cylindrical vertical with closed top) multilayers layers of approved make hoisted & fixed at position and dismantling of old tank complete all as specified and directred. |
| 64 | S&F in repair 20mm bore GI tank nipple suitable for HDPE water tank complete all as specified and directred. |
| 65 | M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed. |
| 66 | M&L Brick work with sub class 'B' brick staight or curved on plan to any radius in half brick thick wall built in CM 1:4 etc complete all as specificed and directed. |
| 67 | M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair without using extra cement and complete all as specified and directed. |
| 68 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) finished even & fair without using extra cement on brick/concrete surfaces complete all specified and directed. |
| 69 | M&L for rendering 10mm thick cement plaster in cement mortar (1:3) finished even & fair without using extra cement on brick/concrete surfaces complete all specified and directed. |
| 70 | M&L for preparation of new surfaces of wall and applying two coats of Oil bound distemper with roller complete over a coat of wall care putty (minimum thickness 1 mm) all as specified and as directed. |
| 71 | M&L for preparation of new surfaces of ceiling and applying two coats of Oil bound distemper with roller complete over wall care putty (minimum thickness 1 mm) all as specified and as directed. |
| 72 | M&L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint with roller over a coat of wall care putty (minimum thickness 1 mm) complete all as specified and as directed. |
| 73 | M & L for complete removal of existing treatment from walls applying a coat of primer and applying two coats of Oil Bound distemper with rich matt finish with roller over a coat of wall care putty (minmum thickness 1mm) complete all as specified and directed. |
| 74 | M&L for preparation of old surfaces of ceiling and applying one coat of Oil bound distemper with roller complete all as specified and as directed. |
| 75 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified and as directed. |
| 76 | S&F in repair vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets, waste pipe and coupling of suitable size complete all as specified. |
| 77 | S&F in repair vitreous china wash hand basin (flat black) white of size 550x400mm with pedestal excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets, waste pipe and coupling of suitable size complete all as specified. |
| 78 | S&F in repair 15mm dia brass chromium plated centre hole mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including connection pipe complete all as specified and directed. |
| 79 | S&F in repair 15mm dia wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. |
| 80 | S&F in repair 15mm dia wall mixer non telephonic type chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. |
| 81 | S&F in repair angle valve 15mm bore dia brass chromium plated fancy type, screwed down, new high pressure with lever type , chromium plated for iron pipe or unions complete all as specified and directed. Make : Shakti |
| 82 | S&F in repair brass CP bib taps long body 15mm bore with lever type handle complete all as specified and directed . |
| 83 | S&F in repair 15mm dia Pillar taps fancy type, cast copper alloy, with lever type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 84 | S&F in repair brass CP 2 in 1 bib taps 15mm bore with lever type handle complete all as specified and directed . |
| 85 | S&F in repair arcylic glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed . |
| 86 | S&F in repair 5.5mm thick sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed. |
| 87 | S&F in repair 600x450mm frameless bevelled edge of 5 mm thick selected quality glass for wall and fixed with wooden plugs and 04 Nos CP brass screw and cup washer complete all as specified and directed. |
| 88 | S&F in repair brass chromium plated soap dish fancy type fixed to wall with CP brass screws complete all as specified and directed. |
| 89 | S&F in repairs chromium plated brass overhead shower rose 150 mm size swivel type with 225mm long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed . |
| 90 | S&F in repair Brass chromium plated toilet paper holder fancy type with flap fixed to wall with CP brass screws of standard size complete all as specified and directed. |
| 91 | S&F in repair brass chromium plated health faucet with 1.0 mtr SS flexile pipe 15 mm dia fixed to angle valve complete all as specified and and directed as per sample approved by GE . |
| 92 | S&F in repair vitreous pedestal pattern (European type) water closet pan white cast iron P or S trap type including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe complete all as specified and directed. |
| 93 | S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 94 | S&F in repair brass chromium plated steel tubular towel rail 20mm dia 'D' type 60cm long between flanges including a pair of CP brass bracket, complete all as specified and directed. |
| 95 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including supply and fixing 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed. |
| 96 | S&F in repair 100mm bore cast iron 'P' Traps complete all as specified and directed. |
| 97 | S&F in repair brass chromium plated grating 100 mm dia with or without waste hole, complete all as specified and directed |
| 98 | S & F in repairs plastic water closet seat cover white (Heavy duty), closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device suitable for existing WC complete all as specified and directed. |
| 99 | S&F in repair 15mm dia sink mixer chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. |
| 100 | S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet minimum 1 mm thick overall size 90x90x25cm including taking out old plate rack complete all as specified. |
| 101 | S&F in repair sinks made of stainless steel 1 mm thick in kitchen with plugs, washers including coupling and waste pipe, fixed in RCC slab in kitchen and connecting to trap, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 102 | S&F in repair brass chromium plated magic eye complete all as specified and directed |
| 103 | S&F repair stainless steel peg set of 5 peg, 45 cm long fancy with SS plate type fixed with wooden gitties and brass screws , complete all specified and directed. |
| 104 | S&F in repair chromium plated steel door lock sturdy metal chain suitable for all types of doors heavy duty simple to use and easy to fit permits the door to be slightly open while allowing viewing & ventilating including all fittings complete all as specified and directed. |
| 105 | Taking down door/window frames with shutters with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each complete all as specified and directed. |
| 106 | Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) all as specified. |
| 107 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 108 | S&F fibre glass reinforced plastic (FRP) door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulde with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & a complete all as specified. |
| 109 | S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) moulded door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specified and as directed. |
| 110 | S&F 100 mm Stainless steel butt hinges medium weight cold rolled fixed to doors with SS screws complete all as specified and directed. |
| 111 | S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 112 | S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed. |
| 113 | Taking down rolling shutters incl hood and cover complete complete all as specified and directed. |
| 114 | M&L Framed work such as grills,gratings with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 115 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe.290.Gde-E-165 complete all as specified and directed. |
| 116 | S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 117 | M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints,including fixing in wall with screw/ hold fast / cement concrete complete all as specified and directed. |
| 118 | S&F 2nd class hardwood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 119 | M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass/guage etc. (with sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass /wire cloth complete all as specified and directed. |
| 120 | S&F mild steel work as in hold fast of flat iron and similar articles conforming to Fe-410-0 complete all as specified and directed. |
| 121 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed. |
| 122 | S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed. |
| 123 | S&F anodised aluminium barrel tower bolt extruded sections 200 mm size complete all as specified and directed. |
| 124 | S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed. |
| 125 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 126 | M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface complete all as specified and directed. |
| 127 | M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface complete all as specified and directed. |
| 128 | Dismantling boarding and description (board/plywood) fixed in any position with screw, complete all as specified and directed. |
| 129 | M&L for 18 mm thick 100% Solid WPC (Wood Polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed.Note : Material test certificate and authentication should be provided by the manufacturing company. |
| 130 | M&L for 18 mm thick 100% Solid WPC (Wood Polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed.Note : Material test certificate and authentication should be provided by the manufacturing company. |
| 131 | S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. |
| 132 | S&F of stainless steel handles 100 mm size for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox ) |
| 133 | S & F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils size 8\\" with necessary telescopic channel, fixing clips and channels etc. complete all as per specified and directed. |
| 134 | S & F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary telescopic channel fixing clips etc. complete all as per specified and directed. |
| 135 | S & F chrome plated stainless steel wire basket (Jar basket) pull out type, size 536 x 500 mm with necessary telescopic channel fixing clips etc. complete all as per specified and directed. |
| 136 | S & F chrome plated stainless steel wire basket (Thali basket) pull out type, size 380 x 500 mm with necessary telescopic channel fixing clips etc. complete all as per specified and directed. |
| 137 | S & F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 mm with necessary telescopic channel fixing clips etc. complete all as per specified and directed. |
| 138 | S & F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 mm with necessary telescopic channel, fixing clips etc. complete all as per specified and directed. |
| 139 | S & F chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary telescopic channel fixing clips etc. complete all as per specified and directed. |
| 140 | S & F chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary telescopic channel, fixing clips etc. complete all as per specified and directed. |
| 141 | S&F in repair Magnetic Catcher of standard size and quality as in kitchen cabinet all as specified and directed. |
| 142 | S&F in repair 40mm dia cupboard knobs fixed with nuts, screw and washer of mild steel, bright finished, complete all as specified and directed. |
| 143 | S&F in repair Stainless steel sink with draining board, made of stainless steel 1 mm thick for kitchen or laboratory with plug, washers waste pipe and coupling, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed. Please Enable Macros to View BoQ information |