|
| 1 | Dismantling floor, stone, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed . |
| 2 | M&L for 25 mm thick PCC 1:2:4 Type B0 (12.5 mm Graded Stone Aggregate) as in sub floor etc., including roughening top surface to receive floor finish complete all as specified and directed. |
| 3 | M&L for non-skid coloured ceramic tiles of any shade any pattern of size (pattern consist of combination of two or more colour 7 to 8 -10 mm (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.Note: No extra cost shall be allowed for removing and refixing joinery and cutting of doors etc, any required during execution work |
| 4 | Material and Labour for glossy finish coloured Vitrified tiles 8-10 mm thick of area of each tiles not exceeding 0.42 Sqm but not exceeding 1.0 Sqm, of any shade of any pattern (pattern consists combination of two or more tiles ) as in vertical surfaces etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 10 mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and directed. |
| 5 | Material and Labour for Vitrified tiles 8-10 mm thick dark shade/double charged/ultracharged area of each tiles not exceeding 0.42 Sqm but not exceeding 1.0 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15 mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete all as specified and directed.Note: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work. |
| 6 | M&L for 10 mm thick Vitrified light shade coloured tiles, square/rectangular double polished, area of each tile n.exc. 0.36 Sqm, in floor including 15 mm thick screed bed in CM 1:4 etc.,set and jointed in neat cement slurry and pointed in white with pigment to match for laying floor finishes all as specified and directed . |
| 7 | M&L for 8 to 10 mm thick ceramic joint free coloured tiles, of size 600 x 100/ 150 mm, on vertical surface/Skirting over and including 10 mm thick rencering in CM 1:4 Laid and Jointed in neat cement slurry and pointed in white cement with pigment to match the shade of the Tiles, complete all as specified and directed. |
| 8 | M&L for 18 to 20 mm granite slab of any size for counter top and similar work over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and directed . |
| 9 | M&L for cut kota stone slab flooring 20-25 mm thick over cement screed bed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab including rubbing and polishing over 20 mm thick screed bed CM 1:4 complete all as specified and directed |
| 10 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc.complete all as specified and directed |
| 11 | M&L for precast cement concrete hollow solid blocks exc 10 cm width masonry type 1:3:6 (16 mm using aggregate as per IS 383) set in cement mortar 1:6 all as specified and directed |
| 12 | M&L for precast cement concrete solid building blocks or slabs 10 cm thick type C1, 1:3:6 (20 mm Aggregate) in walls set in cement mortar 1:4 all as specified and directed . |
| 13 | M&L for HCRM TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified |
| 14 | M&L TMT bars 5 mm and over upto and incl 10 mm dia in stirrups, spacers and binders cut to length bent to shape required including bending, hooking binding with and incuding MS wire not less than 0.9 mm dia complete al as specified and directed |
| 15 | M& L for use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat and rough finished surface of concrete all as specified and directed. |
| 16 | M&L for RCC 1:2:4 type B1 using 20 mm graded aggregate as in concrete for slab supported walls, landing ,canopies and shalfs all as specified and directed . |
| 17 | Taking down cement plaster alongwith tiles on brick or stone wall surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed. |
| 18 | M&L for rendering 15 mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement on any height complete all as specified and directed . |
| 19 | M&L for rendering 15 mm thick in cement mortar 1:4 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement on any height complete all as specified and directed . |
| 20 | M&L for rendering 10 mm thick in cement mortar 1:3 on other than fare face of brick work or concrete ceiling surfaces and finishing the surface even & smooth without using extra cement on any height complete all as specified and directed. |
| 21 | M&L for applying two coat of Distemper oil emulsion by Auto Roller over a coat of primer over 2 to 3 mm thick Birla putty punning including finishing by Sanding Machine and Auto Roller on new plastered surface / wall complete all as specified and directed .Make: Asian Paint (Tractor)/Berger paints (Bison super) |
| 22 | M&L for applying two coat of Distemper oil emulsion by Auto Roller over a coat of primer over 2 to 3 mm thick Birla putty punning including finishing by Sanding Machine and Auto Roller new plaster surface of ceiling complete all as specified or as directed . Make: Asian Paint (Tractor)/Berger paints (Bison super) |
| 23 | M&L for preparing old distemper and painted surfaces of walls including washing rubbing down and brooming down smoke soot mould mass and applying one coat of oil emulsion distemper on old surface complete all as specified and directed . |
| 24 | M&L for preparing old distemper and painted surfaces of ceiling including washing rubbing down and brooming down smoke soot mould mass and applying one coats of oil emulsion distemper old surface complete all as specified and directed . |
| 25 | M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick Birla putty punning including preparation of new plastered surface complete all as specified and as directed. Make:-Asian (Apex Ultima) paints/Berger (Whether coat long life) including necessary scaffolding . |
| 26 | M&L for preparing old external plaster surface of walls including washing rubbing down and brooming down mould mass and applying one coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick Birla putty punning complete all as specified and as directed. Make-Asian (Apex Ultima) paints/Berger (Whether coat long life) including necessary scaffolding upto 2nd floor. |
| 27 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each as in doors, windows & ventilators etc. and removal from site complete all as specified and directed . |
| 28 | Taking down door frame with shutter of area exc 1.50 but n exc 4.0 Sqm each and removing to store complete all as specified and as directed. |
| 29 | M&L Second class hard wood plain solid straight chowkat and frames wrought rebated/framed rebated on the solid rounded/chamfered,put together with glue,pinned at joints, complete all as specified and directed. |
| 30 | M&L for 2nd class hard wood plain cover fillets square rectangular or triangular in section bull nosed splayed chamfered or rounded on one edge or face sectional area exc 06 n.exc 13 Sqm complete all as specified and directed. |
| 31 | S& F cast brass powder coated Box type decorative door handle of 100 mm long complete all as specified and directed . |
| 32 | S & F in repair 35 mm thick IInd class HW plain framed flush shutter board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed. |
| 33 | S & F 35 mm thick IInd class hard wood glazed or skeleton shutters, open rebated and prepared to recieve glass, gauge etc. (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for securing glass etc,. Sizes of member of shutters as specified in SSR Part-I, section 8, clause 8.20 (a), complete all as specified and directed. |
| 34 | S&F of 4 mm thick sheet glass for window/ventilators ordinary quality and glazing with rubber beading/oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed. |
| 35 | S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and including dismantling of old mesh complete all specified and directed . |
| 36 | S&F in repair of parliament hinges cast brass bright polished and fixed complete all as specified and directed |
| 37 | M&L for 18/19 mm thick solid plywood grade BWR type BB over head rack work fixed with decorative mica with both sides adhesive and nails for working table/storage almirah/doors etc fitted in wall in any shape and in any direction etc to the required size and desire pattern and colour as specified and directed. |
| 38 | M&L 12 mm thick plywood grade BWR type BB fixed with adhesive and nails for almirah/doors etc fiited in wall in a any shape and in any direction etc to the reuired size and desired pattern and colour as specified and directed. |
| 39 | M&L for 0.9 mm thick decorative wooden based mica laminated type-I of surface finish colour pattern as approved fixed with approved adhesive as per manufactures instructions finished to approved site for working table /storage almirah etc and as directed . |
| 40 | M&L for prelaminated particle board 18/19 mm exterior grade prelaminated both side with decorative choice lamination fixed screw to timber or wooden frames as approved pattern complete all as specified and directed . |
| 41 | M&L for 2 nd class hard wood plain cover fillets square rectangular or triangular in section bull nosed splayed chamfered or rounded on one edge or face sectional area exc 06 to n.exc 13 Sqcm approved design complete all as specified and directed . |
| 42 | S&F for cast brass bright polished blank double action/automatic lock and release system box type butt hinges of size 100 mm to 125 mm long with decorative fancy type complete all as specified and directed . |
| 43 | S& F extruded brass polished box type decorative door handle of 125 mm long desired as approved pattern complete all as specified and directed . |
| 44 | S&F telescopic channel of size 600 mm ( when closed) stainless steel pairs chromium plated roller type heavy duty asper sample approved . |
| 45 | S&F cast brass magnetic door fanlight catch with 14 mm catch and fixed of approved pattern conforming to the sample approved . |
| 46 | S&F 2 levers brass locks for cub board grade I size 50 mm complete all as specified and directed |
| 47 | M&L for French polishing on surface of any description width or girth including cleaning and preparing the surface with a coat of wood filler on new work and two or more coats till the desired finish is obtained complete all as specified and directed |
| 48 | S&F knobs for cub board fixed in nut screw and washers of brass complete all as specified and directed |
| 49 | S&F colour powder (thickness of powder coat 50 micron) coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed |
| 50 | S&F for anodised aluminium colour powder (thickness of powder coat 50 micron) coated window ,ventilator of sliding shutter,side hung type without sash bars of sections weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing aluminium snap beading screws anodised aluminium fittings such as peg stays 150 mm longs 01 nos with hinge type B-21, 100 mm long (2 nos) and suitable handle 01 Nos complete all as specified and directed. |
| 51 | M&L for aluminium grill (anodised transparant or dyed/coloured to required shade according to IS 1868 with minimum anodic coating coating of grade AC 15 ) approved design /pattern, with approved standarard section and fixed to existing window frame with CP brass stain less steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed . |
| 52 | S&F for powder coated aluminium (minimum thickness of powder coating 50 micron)work for doors and partions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make confirming to IS ;1285 fixed with dash fasteners of required dia and size ,or with fixing clips or expension hold fasteners for filling of gaps at junctions,i,e at top,bottom and sides with required EPDM rubber/neoprene gasket etc, support the frames including necessary filling up of tc aluminium sections shall be smooth rust free straight mitred and jointed mechanically whatever required including cleat angle,aluminium snap beading for glazing/panelling C.P brass / stainless steel screw, including all necessary hardware fittings partion/ doors complete all as directed . |
| 53 | S&F for 6 mm thick toughened glass or opaque pane required colour and size but including all necessary hardware fittings partitions,doors /windows complete all as directed . Make: Saint gobin/Modiguard |
| 54 | S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification and drawing mentioned in SSR complete all as specified and directed . |
| 55 | S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness and size 19 x 19 mm for stiles and 15 x 15 mm for top and bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5 mm thick heat moulded PVC `C' channel of size 30x50 mm forming styles and 5 mm thick 75 mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10 mm (5 mm x 2) thick 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings and complete all as specified and directed . |
| 56 | S&F for 100 mm extruded brass handles, fabricated type polished |
| 57 | S&F for brass 100 mm long Butt hinges Type-21 with galvanised mild steel screws complete all as specified and directed. |
| 58 | S&F in repair of brass barrel tower bolts, 100 mm long complete all as specified and directed. |
| 59 | S&F in repair of brass flush bolt type 2 tower bolts, 100 mm long fixed flush complete all as specified and directed . |
| 60 | S&F in repair of aluminium die cast of door closer hydraulically regulated designed No 3 universal type suitable for door shutter size of 850 mm to 1000 mm in width weight between from 61 to 80 kg and fixed all as specified and directed |
| 61 | S&F in repair decorative end brackets for curtain rod 25 mm dia fancy type as directed. |
| 62 | S&F stainless steel Decorative curtain rod 25 mm dia with bracket and fixed in repair all as specified and directed. |
| 63 | S&F in repairs 250 mm brass sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 64 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or grith and applying two coats of melamine finish (Approve design colour) paint over a coat of pink primer complete all as specified and directed . |
| 65 | S&F for Godrej cylindrical lock for main and internal doors 6 cm back set suitable for left /right handed &inside /out side opening with lock and three keys complete all as specified and directed. |
| 66 | S&F in repair 1000 ltrs rotational moulded polyethylene three layered with EPI coated storage tanks (cylindrical vertical with closed top) hoisted and fixed with all necessary fittings in position including taking down existing water tank of 500 to 1000 ltrs capacity or removing of existing RCC old tank complete all as specified and directed . |
| 67 | S&F 25 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed . |
| 68 | Taking up or down existing steel tubing/PPR pipe of 15 mm dia bore of any grade and connections including making good the disturbed surfaces complete all as specified and directed . |
| 69 | Taking up or down existing steel tubing/PPR pipe of 20 mm dia bore of any grade and connections including making good the disturbed surfaces complete all as specified and directed . |
| 70 | S&F for 20 mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling,laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including water tighteness test etc., complete all as specified and directed. |
| 71 | S&F for 25 mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling, laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including water tightness test complete all as specified and as directed. |
| 72 | S&F in repair 15 mm dia bore CP Bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed . |
| 73 | S&F in repair 15 mm dia bore CP two in one bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed . |
| 74 | S&F in repair 15 mm dia bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed . |
| 75 | S&F of bevelled frameless wall mounted mirror,silver colour of size 600 x1500 mm fixed with wall bolting arrangement of good finish complete all as specified and directed. |
| 76 | S&F in repair PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and directed . |
| 77 | Supply and fix in repair 15 mm dia bore pillar tap swan neck cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed . |
| 78 | S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 Kg per Sqcm fixed to wall or floor etc including fittings complete all as specified and directed . |
| 79 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed. |
| 80 | S&F in repair stainless steel towel rail of 20 mm dia 'D' type, 60 cm long between flanges complete all as specified and directed . |
| 81 | S&F in repair 100 mm dia cast iron floor trap with grating including jointing to waste pipe in run lead fixed in concrete type B1 (1:2:4) using 20 mm size aggregate complete all as specified and directed |
| 82 | S&F for glass shelf assembly consist of 5.5 mm thick sheet glass shelf 12 cm wide with cromium plated bracket guard and railing 60 cm fixedl with screws and making good surface of wall complete all as specified and directed . |
| 83 | S&F for 125 mm fancy type shower rose brass chromium plated with CP arms for 15 mm bore GI pipe complete all as specified and directed . |
| 84 | S&F for brass chromium plated bottle trap of 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or fixed complete all as specified and directed . |
| 85 | Supply only 32 mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed . |
| 86 | S&F CP Health Faucet, (CP body) mild syteel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position of any description, complete as all specified and directed. |
| 87 | S&F for Soap Dish, single, as approved, fixing with Brass Chromium Plated Screws including taking down unserviceable Soap Dish of any description, complete as all specified and directed. |
| 88 | Supply and fix vitreous china premium 1st quality washdown water closet wall hung single piece EWC white /ivory/off white (closed pattern including all necessary accessories with PP soft close seat cover, hinges, Dual flush cistern, fitting all specified and directed. |
| 89 | Supply and fix table top wash hand basin with fixing acessseries size 595 x 445 x 135 mmall as directed. Make: Jaquar cat part No JDS-WHT-25931/Equivalent in Parryware/Cera |
| 90 | Supply and fix single lever basin mixer without pop up waste system with 450 mm long braided hoses all as specified and directed. Make: Jaquar cat part No VGP-81051B/Equivalent in Parryware/Cera |
| 91 | Supply and fix Single lever 3 inlet Divertor Exposed parts Consisting of Operating lever, wall flange and button only suitable for pattern like Jaquar Cat No. ALD-CHR . Make: Jaquar Cat No.ALI 85193 NK/Eqivalent in Parryware/CERA. |
| 92 | Supply and fix Concealed Body for 3 inlet Single lever diverter Cat part No ALD 193 of Jaquar/Equivalent in Parryware/CERA with button assembly cartridge sleeve but without Exposed parts |
| 93 | Supply and fix brass chromiuim plated wall mounted handle triple lever wall mixer with crutch and 5 function for hand shower with 1.5 meter chrome flexible tube Cat part No Jaquar ALTON GRC 3795/Equivalent in Parryware/CERA suilatbe for diverter complete all as specified and directed |
| 94 | Supply and fix 12 mm thick toughtened glass, crystal polished in squares exceeding 0.5 Sqm in each pane as door with locking arrangemnt on pivot hanging,working table top fixed and smilar work etc,.with adhesive of high quality complete all as specified and as directed . Make : Modiguard / Saint Gobain |
| 95 | S&F for extruded brass handes of 600 mm long fabricated type(25 mm dia) polished / high glossy including all necessary fittings and fixture complete all as specified and directed . |
| 96 | Cutting for removing existing branch pices drain or pipe of 150mm making good to walling and rendering cutting out branch channel and making good benches complete all as specified and directed. |
| 97 | Supply and fix Toilet paper Roll Holder with flat recessed type stainless steel complete all as specified and directed . Make:Jaquar 1151N/equivalent in Parryware/CERA |
| 98 | Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110 mm dia fixed to wall complete all as specified and directed. |
| 99 | Supply and fix PVC (SWR) bends 110 mm with access door complete all as specified and as directed. |
| 100 | Supply and fix in repairs 110 mm PVC (SWR) branch piece, single (Single Y) equal or unequal all as specified and as directed. |
| 101 | Supply and fix in repairs 110 mm PVC (SWR) Junction , single T (Single TY) equal or unequal all as specified and directed. |
| 102 | S&F liquid soap container of PTMT fixed with including chromium plated brass screws and wooden plastic cleats (Min weight 105 gms) complete all as specified and directed |
| 103 | Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.Make: Sandhu/Everest |
| 104 | S&F for vitrous china urinal bowl type or half installed pattern ,basin size 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe and including connections to flushing pipe and out going pipes fixed to wall complete all as specified and directed |
| 105 | Removal of debris to a distance exc 1.5 Km but n. exc. 5 Km and depositing out side the MD land and as directed . |
| 106 | S & F mild steel work as in joist , channel, Tee sections, angles fixed independently with out connecting plates conforming to Fe-410 W or grade E-250 quality -A complete all as specified and directed. |
| 107 | M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10 cm in width or girth all as specified and directed. |
| 108 | M&L for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping, screws / J hooks or welding complete all as specified and directed . |
| 109 | M&L in repair for roofing tiles of mangalore pattern interlocking laid dry and at side jointed including applying of one coat of exterior antifungal paint approved colour and dismantling of tiles complete all as specified and directed. |
| 110 | M&L in repair for ridge or hip tiles to suit mangalore pattern roofing tiles bedded and jointed with lime mortar 1:3 or cement mortar in CM 1:6 including applying of one coat of exterior antifungal paint approved colour complete all as specified and directed. |
| 111 | Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI up to1200mm length adjusting level fixed to roof slab by means of cleats made out of FI 40 x 3 mm size 60 cm long and expansion holdfast 12.5mm dia 40mm long with and including PVC profile ceiling insulating panels with EPS stuck to 1mm plain PVC sheet laminated any pattern and any shade of 10 mm thickness and any colour suitably placed in false ceiling grid made of aluminium /GI/ MS complete all as specified and as directed. |
| 112 | M&L for designed false ceiling with 12 mm thick size 1.2 m x 1.80 m Pop Gypsum board sheets fixed with machine screws as per manufacture instructions and including G I channel 22 guage thick grid work main joints placed at 1.20m centre to centre cross joints placed at 450 mm centre to centre, hanging with 22 gauge GI strip suspenders from roof 'J' hooks bolts and nuts etc and treating the Gypsum board with thin layer of Gypsum with gypsum and hydrous binder and prepare the surface till smooth surface is achieved and applying two coat of oil boud distemper of any patterrn and design over a coat of texture primer on ceilings sheets all complete as required as per manufacture's instructions and directed. Notes:-a) The pattern and design shall be as directed by Engineer in charge during the execution of work.b) The exposed surface of the false ceiling shall be joint less even and smooth to receive two coats of oil bound distemperc) The Gypsum board (Pop)/sheets shall be fixed with suitable screws below the grid and shall not be placed over the grid. |
| 113 | All as per item no.112 here-in-before but curved, sunken or raised mouldings surfaces of ceiling complete all as specified and directed . |
| 114 | M&L for Insulated wall lining consisting of WPC/ PVC Insulated Panel having expanded polystyrene Lowers type projection 25 mm sheet (EPS/WPC)stuck to 2 mm thick, any colour sheet duly fitted into the wall as specified and directed. |
| 115 | M & L for point wiring with PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade, FRLS of size 1.5 Sqmm drawn in and including PVC rigid conduit of size not less than 20 mm dia with accessories (concealed) including modular metal flush box of suitable size with inner and outer white plastic plate (same make of switch and socket) including continues 1.5 Sqmm copper conductor (multistranded) PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified conforming to IS-694 for One light point controlled by one switch 6 Amps |
| 116 | All as per item no.115 here-in-before but for One light point controlled by two, two way switches 6 Amps. |
| 117 | All as per item no.115 here-in-before but for One call bell point controlled by one bell push 6 Amps |
| 118 | All as per item no.115 here-in-before but for One fan/ exhaust point controlled by one switch 6 Amps |
| 119 | All as per item no.115 here-in-before but for One 3 pin socket outlet 6 Amps on Independent board |
| 120 | All as per item no.115 here-in-before but for One 3 pin socket outlet 6 Amps on same board |
| 121 | All as per ser item no 115 but here-in before but with 4 Sqmm PVC insulated copper conductor including 4 Sqmm PVC copper conductor used as earth wire for power point /AC point on independent board |
| 122 | Supply and fixing of Modular Switch, one way, 6 Amps complete all as specified and directed |
| 123 | Supply and fixing of Modular Switch two way, 6 Amps complete all as specified and directed |
| 124 | Supply and fixing of Modular Switch socket outlet 3 pin 6 amp flush type 3 module complete all as specified and directed |
| 125 | Supply and fixing of Modular Switch socket combination 16 Amps 6 pin flush type 3 module complete all as specified and directed |
| 126 | Supply and fixing of bell push Modular type complete all as specified and directed |
| 127 | Supply and fixing of call bell multi pupose musical complete all as specified and directed |
| 128 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 129 | Supply and fixing LED lights fitting mirror type 2' x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 130 | Supply and fixing Opal Globe glass with Nickel finishing wall mounted Fancy light fitting Cat No. E-27 LED 7W of Havells / Equivalent in Phillips / Crompton, 220V, AC with driver ,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 131 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers , holders ,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 132 | Supply and fix Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200 with Copper winding of sweep 300 mm all as specified and directed. |
| 133 | Supply and fixing of ceiling rose in poly carbonate 3 plates flush type 6 amps, 250 volts AC complete all as specified and directed. |
| 134 | Supply and fixing ceiling fans complete with blades ,down rods , remote controlled electronic regulator and accessories ,230V, 1200 mm sweep, Min air delivery 210 CFM with service valve 6.00 BEE, Five star rated with brushless direct current motor (BLDC) all as specified and directed. |
| 135 | S&F Fan regulator Modular type two module type 250 volts AC complete all as specified and directed. |
| 136 | Supply and fixing MCB, SP 6-32 Amp rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all specified and directed. |
| 137 | Supply and fixing MCB, SPN 40 Amp rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all specified and directed. |
| 138 | Supply and fixing sheet metal enclosure distribution board (DB), when MCB to be used, dust and vermin proof, single pole and neutral (SPN) 8 way with 200 Amps rated copper bus bar double door protection, neutral bar, earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed. |
| 139 | Material and labour for submain wiring using two run of sinlge core PVC insulated cable(FRLS) 6 Sqmm copper conductor multi stranded and 6 Sqmm copper conductor insulated cable (FRLS) as earth wire drawn through and including PVC rigid conduit of size not less than 25mm dia with accessories (concealed) complete all as specified and directed |
| 140 | Material and labour for Earthing complete with galvanised steel earth plate electrode 600 × 600 × 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 in SSR Part 1 connected to earthing test point all as specified and directed including testing on completion |
| 141 | Supply and install 2 TR Capacity Air Conditioner ,BEE 5 star rating Hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality (inverter type ) including provision of suitable bracket fixing arrangements ,required copper pipe and insulation as per site requirement and as specified and directed. |
| 142 | Supply and fix Voltage stabilizer 5 KVA for automatic operation , single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilizer at 230 V with accuracy of +/- 2.5% model No VG 500 of Make V Guard /Equivalent in Havells/Havells /Bajaj/Crompton. |
| 143 | Taking down carefully (copper/aluminium) point wiring complete of any type (batten/surface conduit or concealed) for light point , bell point socket point or power point complete with all fitting such as switches , sockets pendents regulators etc.,complete and making good disturbed surfaces of wall , floor or ceiling with plaster or tiles or roof treatment etc., and finishing the surfaces with distemper/white washing/colour washing tpo match with the existing surface all as specified and directed. |
| 144 | Schedule of Credit (Minus) Rs.10973.00 NOTE: Bidder shall insert credit amount of Rs.10973.00 as rate in Green field under Col-13. Please Enable Macros to View BoQ information |