|
| 1 | Surface dressing soft /loose soil n exc15 cm deep and removal of scrabs and clearing site, complete all as specified and directed. |
| 2 | Rough excavation not exceeding 1.5 m deep and getting out soft/ loose soil, complete all as specified and directed. |
| 3 | Excavation in trenches in soft /loose soil,n exc 1.5m wide and n exc 1.5m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 sqm on plan and n exc 1.50m in depth, complete all as specified and directed. |
| 4 | Returing filling in including spreading, levelling, watering & well ramming in layers not exc 25cm, complete all as specified and directed. |
| 5 | Removing excavated material nexc 250m and n exc 500 m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed. |
| 6 | M&L for hard core with broken stone or boulders of gauge 63 mm but n exc.100mm, deposited spread and levelled in layers n.exc 15 cm thick water and rammed true surface, complete all as specified and directed. |
| 7 | M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in foudnation, subbase filling and mass concrete, complete all as specified and directed |
| 8 | M&L for reinforced cement concrete (nominal mix) Type-B-1 (1:2:4) using 20mm graded crushed stone aggregate) as in foundation raft,footings, foundation beam , plinth beams , bases for columns etc complete all as specified and directed |
| 9 | M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (using 20mm graded crushed stone aggregate) Slabs supported on walls, lintle beams and columns in , roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste of forwork, complete all as specified and directed. |
| 10 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish, complete all as specified and directed. |
| 11 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, fair finsh, complete all as specified and directed. |
| 12 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floor and beam etc., fair finsh, complete all as specified and directed. |
| 13 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed |
| 14 | Description all as per serial item No 13 here-in-before, but 6 to 8mm dia as in stirups, spacers and binders, complete all as specified and directed. |
| 15 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc., complete all as specified and directed. |
| 16 | M & L for rendering 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 17 | M & L for preparation of newly plastered surfaces of walls and applying two coats of white wash , complete all as specified and directed. |
| 18 | M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.Note :- Reinforcement where provided shall be measured and paid seprately. |
| 19 | M & L for rendering 15mm thick in CM 1:4 on stone masonry / brick surface finished even and smooth without using extra cement with and including liquid water proofing admixture as per manufacturer instructions, complete all as specified and directed. |
| 20 | Material and labour for preparation of new surface externally of wall and applying 1 to 2mm wall care puty and Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over a coat of 2mm thick plaster of paris putty to make plastered surfaces even and smooth, complete all as specified and directed. |
| 21 | S&F mild roof structural steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlines and fastening including distance pieces etc., complete all as specified and directed. |
| 22 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer, complete all as specified and as directed. |
| 23 | S&F mild steel work in plates (plain) channels, squares cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, complete all as specified and as directed. |
| 24 | S&f mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed both ends each screwed end to be fitted with washers and one hexagonal square nut, n exc 30cm long dia of neck n exc12mm, complete all as specified and as directed. |
| 25 | S&F Pre-painted nainital pattern galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws,Including Dismantling plain or corrugated sheet of any gauge and thickness of roof covering etc., complete all as specified and directed. |
| 26 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws,Including Dismantling plain or corrugated sheet of any gauge and thickness of roof covering etc., complete all as specified and directed. |
| 27 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed |
| 28 | S & F of Powder coating of any colour (Thickness of powder coating not less than 50 micron ) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as door stopper (1 No.). hinges type B-21 125mm long (3 Nos.) suitable handles including Mortice locking arrangment including frosted glass in upper pane and ACP sheet in lower Pane .) for each shutter, complete all as specified and directed. |
| 29 | S&F Powder coating of any colour (Thickness of powder coating not less than 50 micron ) Anodised aluminium window and ventilator shutters fixed/sliding/side Hung type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle , locking arrangement, Necessary Butt Hinges, Tower Bolts etc., complete all as specifried and directed. |
| 30 | S&F 5.5 mm thick sheet glass Plain/Tinted of selected quality and glazing with aluminium and rubber beading in squares/rectangular window panes etc with complete fittings and fixtures, complete all as specified and as directed |
| 31 | S&F khatamband pattern false ceiling, design as approved by GE with ornamental wood work made out of 1st class soft wood (Deodar) including fillets/cornices and 12mm thick BWR plywood and finally finishing with french polish (Two or more coats) including dismantling wall and ceiling boards (fibre, pulp, insulation, etc.), complete all as specified and directed. |
| 32 | S&F 10-12mm thick 4 inch complete knot free polished with P U material glossy finish 1st class softwood wooden(Australian) panelling fixed with tounged and grouted a wall panelling and including fillets/cornices and 9mm ply wood fixing on wall, complete all as specified and directed. |
| 33 | M&L for plain cement concrete Type B-1 1:2:4 (Using 20mm graded crushed stone aggregate ) 50 MM thick, as in sub base, complete all as specified and directed. |
| 34 | Supply and installation of 100% EPDM Rubber Gym flooring tiles 500x500x30mm thick multicolour pigment ,with anti-skid surface,heavy duty ,weather resistance,fixed with proper bonding/adhesive, complete all as specified and directed. |
| 35 | M&L for walling of random rubble masonry built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted and pointing flush the surface in contact with earth in the same mortar as the work proceeds including necessary weep holes at 2m centre to centre as in retaining wall, complete all as specified and directed. |
| 36 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4, complete as specified and directed. |
| 37 | M&L for rubber moulded chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments laid over and including 20mm thick screed bed or bedding layer in cement mortor (1:6) and 75 mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate), set, jointed and pointed in neat cement slurry including demolition/ Dismantling of tiles and rubish of the material, complete all as specified and directed. |
| 38 | M&L for plain cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25, complete all as specified and directed. |
| 39 | S&F 35mm thick second class clean swan softwood fixed in wall as in shelves including all fiting and fixture as per site requirment without any extra cost, complete all as specified and directed. |
| 40 | S&F 25mm thick second class clean swan softwood making aesthetic design fixed with nails in any situation as in eaves board selected including preparation of surfaces and applying two coats of synethetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 41 | M&L for Making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match it as per the existing surface of wall/ceiling etc. for the following, complete all as specified and directed. |
| 42 | One light point / fan point wiring system controlled by one way switch complete ., complete all as specified and directed. |
| 43 | One 3/5 pin type 5 Amp socket outlet point fixed on same board and controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 44 | Description all as per serial item No 41 here-in -before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete .l, complete all as specified and directed. |
| 45 | Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module , complete all as specified and directed. |
| 46 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed. |
| 47 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module , complete all as specified and as directed. |
| 48 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modula, complete all as specified and directed. |
| 49 | Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body, complete all as specified and directed. |
| 50 | Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete fitting, complete all as specified and directed. |
| 51 | Supply and fixing of LED street light fitting for buildings of rated capacity 35 Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 52 | S & F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 4/6 way type 220 volt AC supply system with IP-43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface,complete all as specified and directed. |
| 53 | Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. |
| 54 | Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. |
| 55 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 10 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes, complete all as specified and directed. Please Enable Macros to View BoQ information |