|
| 1 | Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed withearth around, in layers not exceeding 25 cm in hard/dense soil all as specified and as directed. |
| 4 | M&L for removing excavated material (any type of soil) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed |
| 5 | M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders all as specified and as directed. |
| 6 | M & L for providing 100 mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors all as specified and as directed. |
| 7 | M & L for providing 75 mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors all as specified and as directed. |
| 8 | M&L for providing 50mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) as in floor/paving etc including finishing cement concrete surface even and smooth without using extra cement all as specified and as directed. |
| 9 | M&L chequered Cement concrete tiles 30cmx30cmx25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed all as specified and directed. |
| 10 | Dismantling structural steel work of any description and in any position etc all as specified and as directed. |
| 11 | Dismantling existing fencing posts (Steel post) of any description including embedded portion inside the ground, each n exc 0.5 cu. m, getting out and removing soil / debris to a distance not exceeding 500m etc complete all as specified and as directed. |
| 12 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed. |
| 13 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 14 | M&L formwork for rough finished flat surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams, etc complete all as specified and directed |
| 15 | Dismantling of chain link fencing of any gauge and size not exceeding 4 Kg/ Sqm complete all as specified and as directed. |
| 16 | M&L for digitally printed Glazed ceramic tiles (design as approved by Enge-in-Charge) in vertical surfaces at any size not less than 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and directed |
| 17 | Supply and fixing of 25mm thick EPDM flooring (19mm SBR + 6mm EPDM) for children play area with approved colour and pattern complete all as specified and as directed.Note :1. The work includes thorough preparations of the sub-base, ensuring the exisiting PCC/concrete surface is clean, dry, levelled and free from dust, oil, grease and loose particles, and making good all undulations prior to application.2. The SBR base layer shall be formed by mixing graded recycled rubber granules (1-4 mm size) with approved polyurethane binder, laid evenly over the prepared surface, properly levelled, compacted and finished to achieve the required thickness of 19 mm.3. Over the base layer, the EPDM top layer of 6 mm thickness shall be laid monolithically using colored EPDM granules mixed with PU binder, spread uniformly and finished smoothly with trowel to obtain a seamless,dense, anti-skid and shock-absorbent surface. the surface shall be free from undulations, cracks, joints, air pockets or imperfections. |
| 18 | Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed. |
| 19 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in hard/dense soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm on plan and getting out complete all as specified and directed |
| 20 | M&L for returning filling in hard/dense soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed |
| 21 | M& L for precast cement concrete block masonry with solid blocks using PCC 1:3:6, type C1(using 20mm graded stoneaggregate), exc. 10cm in width, set in CM 1:6 all as specified |
| 22 | PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in filling, foundation and mass concrete |
| 23 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 24 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:4 all as specified and as directed. |
| 25 | Material & Labour for preparing newly plastered wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and as directed. |
| 26 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290, Gde-E-165 all as specified and as directed |
| 27 | S&F for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 28 | M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide /zinc chrome primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 29 | M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide /zinc chrome primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
