|
| 1 | Dismantling of floor hearth or wall tiling including cement mortar bedding (not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 3 | M&L non skid ceramic coloured tiles not less than 8mm thick 1st quality (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface and over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L Non skid white ceramic tiles not less than 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed. |
| 5 | M&L Non skid white ceramic tiles not less than 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to over 15mm thick screed bed or bedding layer of CM 1:6 complete all as specified and directed. |
| 6 | M&L coloured glazed ceramic tiles of size (350x250x7mm/450x350x7mm) thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over including 10 mm thick cement plaster in cement mortar 1:4 complete all as specified and directed. |
| 7 | M&L vitrified ceramic tiles Light Shade not less than 10mm thick (square/rectangle) polished area of each tiles exceeding 42 sqm but not exceeding 1 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 8 | M&L 25mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in leveling coarse of flooring complete all as specified and directed |
| 9 | Taking down cement plastering on stone wall/brick wall etc including racking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 10 | Demolition of brick or stone masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 11 | M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 12 | M&L 15mm thick rendering on wall in CM 1:6 on brick/concrete surface and finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 13 | M&L 15mm thick rendering on wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 14 | Taking down chowkats or frames with shutters (without taking of shutters from the frame) of any description alongwith fittings not exceeding 1.5sqm each complete all as specified and directed. |
| 15 | Taking down chowkats or frames with shutters (without taking of shutters from the frame) of any description alongwith fittings exceeding 1.5sqm and not exceeding 4 Sqm each complete all as specified and directed. |
| 16 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 17 | S&F 35 mm thick 2nd class hard wood Plain framed, panelled shutters (any number of panels), with panel of timber flat on both sides (feather edged) or 12 mm thick BWP of veneered particle board medium density wood commercial face veneers fixed to chowkats complete all as specified and directed. |
| 18 | S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded fitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numbers complete all as specified and directed. |
| 19 | S&F framed work such as grills and gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe 410 (or) Fe-310-0 complete all as specified and directed. |
| 20 | Hacking out old broken glass (any thickness, size, quality or description) from wooden, steel, frame or stone, concrete or brick surrounds, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 21 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average with aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 22 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and directed. |
| 23 | S&F 4mm thick , plain sheet glass, selected quality and glazing with oil putty in squares exceeding 0.5 sqm in each pane complete all as per specified and directed. |
| 24 | S&F PVC Door frames of size 50mm x 47mm made of 5mm single side pr-laminated colour PVC sheet and edges will be painted to match with pre lam sheet reinforced with MS square tube, suppling and fixing in opening as per specifications and drawings complete all as specified and directed. |
| 25 | S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top and bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification and drawing complete all as specified and directed. |
| 26 | S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 27 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed. |
| 28 | S&F Butt hinges, medium weight cold rolled 100mm size ISI marked complete all as specified and directed. |
| 29 | S&F extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed. |
| 30 | S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as fixed in repairs complete all as specified and directed. |
| 31 | M&L applying two coats of synthetic enamelled paint over one coat of pink primer including preparation of new wood or wood based surfaces of any description not otherwise described over 10cm girth or width complete all as specified and directed. |
| 32 | S&F Anodised aluminium frame (Powder coated minimum thickness of powder coating 50 micron) for doors, window, partation wall with one or more rebates including joining cleat for fixing, rubber packing, anodised aluminum snap on beading for fixing glass panes in frame etc complete all as specified and directed. |
| 33 | S&F anodised aluminium (Powder coated minimum thickness of powder coating 50 micron) door shutter, aluminum section weighing 0.55 kg/ m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. |
| 34 | S&F anodised aluminium (Powder coated minimum thickness of powder coating 50 micron) window, ventilator shutters fixed type with out sash bar, aluminium sction weighing 0.55 kg per sqm incl necessary jointing cleats, glazing , clips, rubber packing, anodised aluminum snap, beading, screws etc, complete all as specified and directed. |
| 35 | S&F brass mortice lock vertical type 100mm size 4 levers complete all as specified and directed. |
| 36 | S&F door closer hydraulically regulated of cast iron body designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed complete all as specified and directed. |
| 37 | Dismantling Stone Slabs and tiles of any decription or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 38 | Rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed. |
| 39 | M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 40 | M&L 75mm thick PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in plinth protection/path finishing the surface even and smooth without using extra cement laid in bays including joint filling using sealing compound grade A complete all as specified and directed. |
| 41 | Dismantling boarding, fibre or pulp, insulation etc. in insulation boards slabs, blankets any thickness incl cover fillets complete all as specified and directed. |
| 42 | M&L 12mm thick prelaminated particle board, interior grade, prelaminated on both side with decorative choice lamination and fixed with screws to aluminium frame work complete all as specified and directed. |
| 43 | Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including supply & fixing of 4mm thick Non asbestos fibre cement building boards fixed or laid/inseted to timber/GI frame work complete all as specified and directed. |
| 44 | S&F 8 mm thick Gypsum board of size 600mm x 600mm as in ceiling fixed on GI frame work complete all as specified and directed. |
| 45 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 46 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 47 | S&F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof, fixed with self tapping screws as specified complete all as specified and directed. |
| 48 | Dismantiling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 49 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 50 | M&L applying two coats of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width complete all as specified and directed. |
| 51 | Dismantling unframed timber scantling 40 sqcm and over in section framed in any position complete all as specified and directed. |
| 52 | M&L 2nd class soft wood, clean sawn as in scantling complete all as specified and directed. |
| 53 | Dismantiling of water tanks of capacity exceeding 500 and not exceeding 1000 ltrs including all necessary fittings complete all as specified and directed. |
| 54 | Dismantiling of water tanks of capacity exceeding 250 and not exceeding 500 ltrs including all necessary fittings complete all as specified and directed. |
| 55 | S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks triple layer made (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed. |
| 56 | S&F 1000 ltrs PVC rotational moulded polyethylene water storage tanks triple layer made (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed. |
| 57 | S&F 18/19mm thick veneered decorative plywood, grade 1(with BWR Rasin) with decorative face veneers on both faces; fixed with screwa to the timber frame work as in shelves/ kitchen cupboard/almirah shutters including all fittings complete all as specified and directed. |
| 58 | Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 59 | M&L 25mm outer dia 3-layer PPR polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.complete all as specified and directed. |
| 60 | Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 61 | M&L 32mm outer dia 3-layer PPR polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PPR plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 62 | Cutting chases, pinning in making good to facings where reqd and pointing in cement mortar 1:3 to ends or edges of shelves, for water tubing etc and making good, cutting exceeding 10cm girth but not exceeding 20cm girth in stone walls complete all as specified and directed. |
| 63 | Lagging to 20 to 32mm dia pipe used in internal water supply or plumbing all around with 25 mm thick bonded mineral wool performed \\"SNAPON\\" pipe section density 144 Kg/Cum conf to IS-9842 including chicken mesh wire neeting 25 gauge, 20mm mesh complete all as specified and directed. |
| 64 | S&F 32 mm dia PPP-R gate valves (Brass inserted) as per requirment of the site complete all as specified and directed. |
| 65 | S&F 32 mm dia PPP-R Ball valve (Brass inserted) as per requirment of the site complete all as specified and directed. |
| 66 | S&F in repairs 15mm dia Bib taps cast copper alloywith fancy type chromium lated crutch or butterfly handle screwed down, scewed for iron pipes or for brass ferrule complete all as specified and directed. |
| 67 | S&F in repairs 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori complete all as specified and directed. |
| 68 | S&F in repairs 15mm dia Brass CP mixer (Wall/Basin/Sink) fancy type chromium plated for mixing hot and cold water screwed down for iron pipe complete all as specified and directed. |
| 69 | S&F in repairs 15mm PVC connection 450mm long with PTMT nuts of superior quality complete all as specified and directed. |
| 70 | S&F in repairs harrison rail/curtain rails, mild steel chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 71 | S&F in repairs sink with drainage board made Stainless steel sink1mm thick kitchen or laboratory with plugs, washer and wastes pipe, including bedding in cement mortar on dwraf wall or including fixing cantilever brackets and connecting union pipe, over all size 915x 460 mm bowl size 410mm x330mm x160mm complete all as specified and directed. |
| 72 | S&F in repairs Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets &32mm waste cuppling complete all as specifed and directed. |
| 73 | S&F in repairs Vitreous China wash down Water closet pan (pedestal pattern) with plastic water closet seat cover jet spray closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) complete all as specified and directed. |
| 74 | S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect complete all as specified and directed. |
| 75 | S&F in repairs Vitreous China Water closet (Squatting pattern) \\"Orissa Pattern\\" size 580x 440 mm white with 'P' or 'S' trap, front or back inlet and foots rests any pattern (excluding flusing cistern and flush pipe) complete all as specified and directed. |
| 76 | S&F in repairs 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern complete all as specified and directed. |
| 77 | S&F 600x450 bevelled edged looking mirror 2mm thick of selected quality glass, mounted on 4 mm thick PVC sheet and with aluminnium frame work fitted with chromium plated brass screws and cup washers including taking old one complete all as specified and directed. |
| 78 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 79 | S&F in repairs tubular towel rail aluminium anodised 20mm dia, D type, 60 cm long with brackets complete all as specified and directed. |
| 80 | Demolition of re-inforced cement concrete as in beam /Slab and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 81 | M&L RCC Nominal mix 1:2;4 type B-1 (using 20mm graded crushed stone aggregate) for slabs supported on walls and the like any thickness and in shelves complete all as specified and directed. |
| 82 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as per specified and directed. |
| 83 | M&L TMT steel bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 84 | Dismantiling of cement asbestos /CI/PVC pipe of size 100mm dia and Above complete all as specified and directed. |
| 85 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 86 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls and floor complete all as specified and directed. |
| 87 | S&F110mm PVC (SWR) bends with or without access door complete all as specified and directed. |
| 88 | S&F75 mm PVC (SWR) bends bends with or without access door complete all as specified and directed. |
| 89 | M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 90 | S&F in repairs Pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 91 | S&F in repairs Chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 92 | S&F in repairs Viterous China urinal, bowl type flat back, size 465x355x265mm white (minimum) with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, fixed in repairs, complete all as specified and directed. |
| 93 | S&F in repairs toilet paper holder, vitreous china, box type, coloured complete all as specified and directed. |
| 94 | S&F in repairs Soap dish Vitreous China white, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 95 | Note :-An amount of Rs. 37260.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |