|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : COMPREHENSIVE MAINT/REPLACEMENT OF LT CABLE AND MISCELLANEOUS ITEMS FOR ZONE-I AND ZONE-II AT CANTT AREA UNDER GE (I) KANPUR Contract No : GE(I)/KAN/T-10 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, foundation filling of poles or stays and for rerouting of cables complete all as specified and directed. |
| 3 | Returning filling including spreading, leveling, watering and well ramming in layers not exc 25 cm each all as required complete all as specified and directed. |
| 4 | Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 5 | S&F in trenches 50/38 mm HDPE Double wall corrugated (DWC) Pipes for duct cable as per IS 16205 , smooth inner surface and a corrugated outer surface to provides strength and resistance to compression load while smooth inner surface ensures efficient flow all as required complete all as specified and directed. |
| 6 | S&F in trenches 63/50 mm HDPE Double wall corrugated (DWC) Pipes for duct cable as per IS 16205, smooth inner surface and a corrugated outer surface to provides strength and resistance to compression load while smooth inner surface ensures efficient flow all as required complete all as specified and directed. |
| 7 | S&F in trenches 90/76 mm HDPE Double wall corrugated (DWC) Pipes for duct cable as per IS 16205, smooth inner surface and a corrugated outer surface to provides strength and resistance to compression load while smooth inner surface ensures efficient flow all as required complete all as specified and directed. |
| 8 | M&L for pre cast cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) for foundation filling of poles or LT panels as mass concrete complete all as specified and directed. |
| 9 | M&L for pre cast cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) for foundation filling of stays complete all as specified and directed. |
| 10 | Demolition of cement concrete (un-reinforced) in ground, floors or pavings not exceeding 15 cm thick below or above ground level complete all as specified and directed. |
| 11 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floor / hard-standing, surface finished even and smooth without using extra cement to match with the existing surface complete all as specified and directed. |
| 12 | M&L for drilling manually in soft / loose soil under road / hard standing / culvert / nala of suitable bore for protection cable & pipe upto 80 mm bore complete all as specified and directed. Note: Depth of bore shall not be more than 1 Mtr from original ground level. |
| 13 | Supply and laying to wall or poles or fixing or passing through pipe, in replacement of 1100 volts grade heavy duty cable with XLPE insulated aluminium multistranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed 10 sqmm nominal cross section 4 core in service connections complete all as specified and directed. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification) |
| 14 | Supply and laying to wall or poles or fixing or passing through pipe, in replacement of 1100 volts grade heavy duty cable with XLPE insulated aluminium multistranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed 16 sqmm nominal cross section 4 core in service connections complete all as specified and directed. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification) |
| 15 | Supply and laying in trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 3.5 core complete all as specified and directed. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification) |
| 16 | All as per item No 14.00 above but cable of size 35 Sqmm 3.5 core complete all as specified and directed. |
| 17 | All as per item No 14.00 above but cable of size 50 Sqmm 3.5 core complete all as specified and directed. |
| 18 | All as per item No 14.00 above but cable of size 70 Sqmm 3.5 core complete all as specified and directed. |
| 19 | All as per item No 14.00 above but cable of size 95 Sqmm 3.5 core complete all as specified and directed. |
| 20 | All as per item No 14.00 above but cable of size 120 Sqmm 3.5 core complete all as specified and directed. |
| 21 | S&F in replacement of cable jointing kit for 1100 volt grade cable for straight through termination heat shrinkable type complete with jointing material and accessories suitable for XLPE/PVC armoured aluminium conductor cable of size 10 to 16 Sqmm 3.5/4 core complete all as specified and directed. |
| 22 | All as per item No 20.00 above but for 25 to 50 Sqmm size complete all as specified and directed. |
| 23 | All as per item No 20.00 above but for 70 to 150 Sqmm size complete all as specified and directed. |
| 24 | M&L Painting to existing steel pole structure of 09 mtr height including mild steel work like cross arms, clamps, pipe channel, bracing etc after cleaning and prepration of surfaces painting externally above painting depth with one coat of aluminum paint over a coat of aluminum primer including preparation of existing surfaces and marking pole numbers in 15 cm dia with approved colour in circular and making 03 Numbers & 02 Numbers of bands & strips with 30 cm wide fluorescent paint from bottom of pole to 1.5 mtr height of pole complete all as specified and as directed. Note : Cutting of bushes & tree branches upto 3 Mtrs height of pole shall be deemed included in quoted unit rate. |
| 25 | Supply in replacement to PVC insulated muiltistandard 3 core 1.5 Sqmm flexible copper conductor cable for making connection complete all as specified and directed. |
| 26 | Supply in replacement to PVC insulated muiltistandard 3 core 1.0 Sqmm flexible copper conductor cable for making connection complete all as specified and directed. |
| 27 | Supply in replacement to PVC insulated muiltistandard 3 core 2.5 Sqmm flexible copper conductor cable for making connection complete all as specified and directed. |
| 28 | Supply in replacement to Insulation tap in length 18 Mtr with 2 Inches width suitable for 440 working voltage ISI marked complete all as specified and directed. |
| 29 | Supply & fixing PVC insulated sheathed aluminium conductor armoured cable with inner sheathing for service connection size 10 Sqmm 2 core 1100 Volt complete all as specified and directed. |
| 30 | Supply & fixing PVC insulated sheathed aluminium conductor armoured cable with inner sheathing for service connection size 6 Sqmm 2 core 1100 Volt complete all as specified and directed. |
| 31 | Supply, errecting and installation of steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) duly painted with two coat of black bituminous paint through out, internally and externally up to planning depth and painting remaining portion of pole with two coat of aluminium paint to the entire exposed surfaces over one coat of red oxide primer making/painting three Nos circular strips each of 30 cm wide with one yellow and 02 Nos black colour strip synthetic enamel paint and marking pole number with black paint complete all as specified and directed. (Note : Excavation, earth work, PCC work shall be measured and paid separately under respective items) |
| 32 | M&L for cross arms, bracings, supports, clamps and back plates fabricated from steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape ors size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of alumn paint complete all as specified and directed. |
| 33 | Supply and fix bus bar chambers 300 mm long iron clad with 4 Nos 200 Amp rated copper strips complete fixed flush wall and making good the disturbed wall surfaces all as a required at site complete all as specified and directed. |
| 34 | All as per item No 32.00 above but with 2 Nos 100 Amp complete all as specified and directed. |
| 35 | M&L for repair & welding of LT feeder pillar box / APFC panel front / rear door and locking arrengement with lock & key including minor parts such as hinges, screw, nuts & bolts, gaskets etc including paint patch work making good as per existing colour complete all as specified and directed. |
| 36 | Supply & fix in replacement of front and rear door of LT feeder pillar box according to existing feeder pillar box size made up of 3.15 mm thick MS sheet with two coat of existing feeder pillar box colour paint over one coat of red oxide primer complete all as specified and directed. |
| 37 | Supply, installing, testing and commissioning outdoor type LT feeder piller box double door type (Safety Centre) of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double, front side openable, type IP-54 protection made of CRCA sheet 3.15 mm thick of outer panel and 2.00 mm thick inner compartment of panel size as per IS and having proper locking arrangement in front side door suitable for 440 volts, 50 Hz, 3 phase 4 wire system including cable glands of suitable size for incoming and outgoing cables and comprising with and including following accessories and mounted on PCC Plat form min 45 cm from ground level and PCC 1:3:6, 100 mm thick, 0.5 m all round the panel board including disconnecting cable from old unsv LT feeder piller box with MCCB, MCB, main switch, busbar and dismantling the same complete with the following items housed in :-BUSBAR :- 400 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of copper busbar).INCOMING:- (i) 4 pole MCCB of capacity 250 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 36 KA with overload adjustability with rotary handle- 01 No. (ii) Digital multifunctinal meter V, A, F, kW, KVA, kWh, kVAh, kVArh, THD, Neutral current, Max Demand (with RTC),- 01 No.(iii) Indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE, BLUE) -01 set(iv) CT (200/5A) -03 Nos OUTGOING:- (a) 4 pole MCCB of capacity 100 Amp, breaking capacity 25 KA with themal magnetic release adjustable type - 04 Nos(b) MCCB 4 pole of capacity 63 Amp breaking capacity 25 KA with thermal magnetic release, adjustable type with rotary handle - 01 Nos(NOTE: Rate quoted shall be deemed to be inclusive of replacement of all cable lugs, by removing damaged part of cable and taking out cable from loop to required length including necessary earth work as per site requirement or as directed by Engr-in-charge) |
| 38 | Supply,installing, testing and commissioning outdoor type LT feeder piller box double door type (Safety Centre) of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double, front side openable, type IP-54 protection made of CRCA sheet 3.15 mm thick of outer panel and 2.00 mm thick inner compartment of panel size as per IS and having proper locking arrangement in front side door suitable for 440 volts, 50 Hz, 3 phase 4 wire system including cable glands of suitable size for incoming and outgoing cables and comprising with and including following accessories and mounted on PCC Plat form min 45 cm from ground level and PCC 1:3:6, 100 mm thick, 0.5 m all round the panel board including disconnecting cable from old unsv LT feeder piller box with MCCB, MCB, main switch, busbar and dismantling the same complete with the following items housed in :-BUSBAR :- 600 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of copper busbar).INCOMING:- (i) 4 pole MCCB of capacity 400 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 36 KA with microprocessor release type with overload adjustability - 01 No. (ii) Digital multifunctinal meter V, A, F, kW, KVA, kWh, kVAh, kVArh, THD, Neutral current, Max Demand (with RTC),- 01 No.(iii) Indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE, BLUE) -01 set(iv) CT (200/5A) -03 Nos (v) Square type heavy duty capacitor 440 V,10 KVAr conforming to IS 13340-1993 incl suitable fixing and paralell connection with the commercial line Outgoing: (a) 4 pole MCCB of capacity 250 Amp, breaking capacity 25 KA with microprocesser release adjustable type-3 Nos (b) MCCB 4 Pole of capacity 125 Amp breaking capacity 25 KA with microprocessr release, adjustable type- 1Nos. (Note) : Rate quoted shall be deemed to be inclusive of replacement of all cable lugs by removing damage part of cable and taking out cable from premises shall be carried out by the Engr-in-Charge or rep of GE (I) Kanpur has detaild by GE |
| 39 | S&F in replacement of MCCB 4 Pole 415 Volts 3 phase 630 Amps adjustable type breaking capacity 50 KA, complete all as specified and directed. |
| 40 | All as per item No 38.00 above but MCCB 400 Amps 36 KA complete all as specified and directed. |
| 41 | All as per item No 38.00 above but MCCB 250 Amps 36 KA complete all as specified and directed. |
| 42 | All as per item No 38.00 above but MCCB 200 Amps 36 KA complete all as specified and directed. |
| 43 | All as per item No 38.00 above but 160 Amps 36 KA complete all as specified and directed. |
| 44 | M&L in replacement of Air termination ,single pointed aluminium rod 12 mm dia 300 mm long complete all as specified & directed. |
| 45 | M&L in replacement of test point terminal block made of gun metal or phosphorus bronze size 75x 75x 25 drilled and screwed including 3 nos hex head screw complete all as specified & directed. |
| 46 | M&L in replacement of Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc for roof conductors and down conductors above ground complete all as specified & directed. |
| 47 | M&L in replacement of Galvanised iron strip 32x6 mm buried in ground for necessary connection complete all as specified & directed. |
| 48 | M&L in replacement to Unsv of heavy duty saddle type porcelain type insulator for holding to GI / copper strip with bronze nuts bolts and washers etc all as site requirement complete all as specified and directed. |
| 49 | Cleaning of transformer of size 63 KVA to 315 KVA outer surface suitable for painting and painting with two coat of synthetic enamel paint by spray machine of light grey colour or as directed including transformer accessories such as radiator, conservator tank, marshalling box and incl writing SM No/size/ feeder name etc complete all as specified and directed. |
| 50 | All as per item No 48.00 above but of transformer of size 315 KVA to 750 KVA complete all as specified and directed. |
| 51 | M&L for marking/writing feeder names/ SM No / MES No for HT/LT Electrical Eqpts like VCB, Tfrs, LBS / RMU/panels etc with synthetic enamel paint of approved colour complete all as specified and directed. |
| 52 | M&L for earthing with GI plate electrode of size 60cm X 60cm X 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including GI strip of size 32x6 mm up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of brass and protected by light grade 40mm dia upto 7.5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover 50mm thick and PCC chamber pit with PCC 1:2:4 type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down old unserviceable and making test point and all connections complete all as specified & directed by Engr-in-charge. |
| 53 | S&F On load change over switches in open execution as per required make 4 pole4 15 V, 50 Hz 250A conform to IEC 947-3, EN-60947 AC 23 A front operated complete all as specified & directed. |
| 54 | All as per item No 52.00 above but in sheet steel enclosure of rating 400 Amp complete all as specified and directed. |
| 55 | Detection of any type of fault in HT underground Line (laid in soil at plane area or forest area) with the help of Cable fault locator machine. Cable fault locator with carring vehicle will be brought by the cable fault detection agencies. Span of faulty cable will be trace out by the agencies by meggering HT cable complete all as specified and directed. Note : 1. Detection of fault in one span of length will be measured as one Job either machine placed from one side or both side of the cable. 2. Technicians will be employed by the working agencies. 3. Earth work and taking out will be measured and paid seperately. 4. Material for repair and replacement measured and paid saperately. 5. One job shall be measured if the fault has successfully identified by the fault locator machine or removing moisture in the cable if required. |
| 56 | M&L for painting to LT Panel/steel structure such as cross arms, clamps, pipe channel, bracing ( both side will be considered as one unit) etc after removing ,scraping cleaning etc to old paint using shyenthic enamel paint applying two coat (one as finishing ) over one coat of red primer oxided by paint spray gun including marking/ written indication sign/ words in diffrent colour etc complete all as site required and directed. Note : Paint colour shall be approved by Deptt. |
| 57 | Supply and errect in true vertical position LT electric pole, Octogonal Pole, hot deep galvanised, with base plate of 220x220x12 mm thick, 07 Mtrs Long, top dia 70mm, bottom dia- 135mm, thickness of sheet- 3 mm, including Single arm GI bracket, inbuilt cable junction box with door, connection plate, MCB 6A, duly connecting existing LT UG cable, cable lugs, work included necessary earth work and RCC foundation as per manifacturers recommendation complete all as specified and as directed . Note: Earth work, PCC foundation as per manufacturer recommendation included in the unit rate. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
