Name of Work:- PROVN OF WORK SERVICES IN SMC ALONG WITH HARD STANDING FOR STORAGE FOR POL AND HYGIENE CHEMICALS ALONG WITH CONNECTED WORKS AT AF STN TEZPUR. | Sl. No. | Item Description | |
| 1 | Surface dressing n exc 15 cm deep in hard and dence soil, complete all as specified and as directed by Engineer-in-Charge. | | 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and as directed by Engineer-in-Charge. | | 3 | Removing to excavated, surplus spoil material exc. 1.50 km but n exc. 5 km away from MD Land and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and as directed by Engineer-in-Charge. | | 4 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm each layer, complete all as specified and as directed by Engineer-in-Charge. | | 5 | Materials and labour for plain cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and as directed by Engineer-in-Charge. | | 6 | Material and labour for, moorum/red bajri filling in floors or pavings, laid in layers not exc.25cm thick, spread, levelled and rammed including watering, complete all as specified and as directed by Engineer-in-Charge. | | 7 | Materials and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6), complete all as specified and as directed by Engineer-in-Charge. | | 8 | Materials and labour for plain cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary formwork, complete all as specified and as directed by Engineer-in-Charge. | | 9 | M & L for Acid resistant tiles 15mm thick vitreous ceramic including backing coat 15mm thick in cm (1:3), unglazed, set, jointed and pointed in chemical resistant mortar, resin type in floors and walls, complete all as specified and as directed by Engineer-in-Charge. | | 10 | Materials and labour for machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed or bedding layer of CM (1:6), complete all as specified and as directed by Engineer-in-Charge. | | 11 | Material and labour for RCC M25 (Design Mix) (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed. | | 12 | Material and labour for RCC M25 (Design Mix) (using 20mm graded crushed stone aggregate) as in slab supported on walls , beams and columns in floors , pillars, piers, posts and struts, complete all as specified and as directed. | | 13 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. for rough finished surface, complete all as specified and as directed. | | 14 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface, complete all as specified and as directed. | | 15 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface, complete all as specified and as directed. | | 16 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed. | | 17 | Use and waste of Formwork for fair finished surfaces concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed. | | 18 | Material and labour for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed. | | 19 | Material and labour for TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete as all specified and as directed. | | 20 | Material and labour for rendering CM (1:6) 15 mm thick on fair faces of brick work or concrete surfaces surface even and smooth without using extra cement, complete as all specified and as directed. | | 21 | Material and labour for Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick with WPC of top layer in Cement Mortar 1:4 on brick wall/cement block wall or concrete surfaces, surfaces finished even and smooth without using extra cement , complete all as specified and as directed. Note: WPC will be measured and paid separately under relevant item. | | 22 | Material and labour for applying 1 mm thick wall care putty on wall on internal new wall surfaces as per manufacturerer instruction, complete all as specified and as directed. | | 23 | Material and labour for applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes, complete all as per specified and as directed. | | 24 | Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening confirming Fe-290 (Gde E- 165) and fixing , complete as all specified and as directed. | | 25 | Material and labour for Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete as all specified and as directed. | | 26 | Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete as all specified and as directed. | | 27 | Material and labour for Welded steel wire fabric supplied and fixed complete to wood or steel members, complete as all specified and as directed. | | 28 | Material and labour for preparation of new plastered or unplastered surfaces and applying two coats of cement base paint over a coat of primer, complete as all specified and as directed. | | 29 | Material and labour for broken stone or boulders hardcore of gauge not exc.63 mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. | | 30 | Material and labour for 40mm thick plain cement concrete (1:2:4) type D2 (using 20mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed. | | 31 | Material and labour for 75mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, finshed the surface even and smooth without using extra cement, complete all as specified and as directed. | | 32 | Material and labour for 100mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, finshed the surface even and smooth without using extra cement, complete all as specified and as directed. | | 33 | Supply and fix PVC (SWR) floor trap, plain with grating,with diameter of outlet 75 mm, including jointing with solvent cement, complete all as specified and as directed. | | 34 | Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed. | | 35 | Supply and fix Bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule, complete as all specified and as directed. | | 36 | Material and labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – II , including ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed , complete as all specified and as directed. | | 37 | Supply and fix 15mm stop valve of PTMT any colour high pressure, scrwed for iron pipe (Min wt 90 gms), complete as all specified and as directed. | | 38 | Materials and labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and as directed. | | 39 | Materials and labour for galvanized steel tubing, medium grade, 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and as directed. | | 40 | Supply and fix Ball valves of 15 mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 142gms), complete as all specified and as directed. | | 41 | Materials and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) weighing 0.600kg/m ,work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as per architectural drawings and the directions of Engineer-in-Charge. | | 42 | Supply and fix Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete as all specified and as directed. | | 43 | Supply and fix 4.80mm thick tinted sheet glass and glazing in square exc 0.5 Sqm in each pan, complete all as specified and as directed. | | 44 | Supply and fix brass 2 levers mortice lock, vertical type, size 100mm, complete all as specified and as directed | | 45 | Material and labour for transparent acrylic sheets of 5 mm thickness (grade: clear/virgin quality) for fabrication of cabinet shutters/ sides/top as required. Acrylic sheet to be fixed on Aluminium/ Steel/CP fitting frame using approved quality adhesive, screws, corner brackets and necessary hardwares. All edges to be smooth finished, polished and free from sharp burrs.The cabinet shall include hinges, handles, magnetic catchers/lock, rubber buffers and necessary fittings complete.Installation shall be carried out true to level and alignment, ensuring proper opening/closing of shutters.All work shall be completed as per manufacturer guidelines and as directed by Engineer-in-Charge. | | 46 | Providing and fixing transparent glass panels of approved make and quality, 4.8 mm thick plain/frosted transparent glass, machine-cut to required size, edges properly polished, fixed in aluminium frame with rubber beading and glazing clips, including handling, cutting, wastage, transportation and complete installation as per site requirement, complete all as specified and as directed by the Engineer-in-Charge. | | 47 | Supply and fixing PVC Celuka Particle Board Partition using 18mm thick high-density PVC/WPC Celuka Board of approved make and shade, fixed over suitable PVC/Aluminium framing including horizontal and vertical members as per site requirement. The partition shall be rigid, waterproof, termite proof, borer proof and corrosion resistant, having smooth calibrated finish, suitable for office/hospital/administrative building use.Boards to be fixed using stainless steel screws, PVC solvent/adhesive, necessary corner angles, edge beading and finishing materials, ensuring proper line, level, plumb and alignment. All edges to be sealed with matching edge trim for neat appearance. Cutting, grooving, fitting and finishing shall be included, complete all as specified and as directed by the Engineer-in-Charge. | | 48 | Material and labour for pre cast RCC slab of type B1 1:2:4 ( using 20mm geaded stonev aggregate ) as in cover slab of drain supported on walls, complete all as specified and as directed. | | 49 | Material and labour for preparation of old wooden surfaces of any description over 10cm girth or width, not otherwise described and applyng one coats synthetic enamel paint, complete all as specified and as directed. | | 50 | Supply and fixing 300mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. | | 51 | Supply and fixing in repair's 20mm bore Stainless Steel drapery rods sheet of grade X02Cr19NilO (304 S2) , suitable for door/widows curtain with necessary fancy type dooms as approved by GE, and fitted to each end, new Stainless steel brackets sheet of grade X02Cr19NilO (304 S2) and fixed to wall, complete all as specified and as directed. | | 52 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed by the Engineer-in-Charge. | | 53 | Supply and fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240, complete all as specified and as directed by the Engineer-in-Charge. | | 54 | Material and labour for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), complete all as specified and as directed by the Engineer-in-Charge. | | 55 | Material and labour for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge. | | 56 | Supply and fixing Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified and as directed by the Engineer-in-Charge. | | 57 | Supply and Fix sink with drainage board made iof stainless steel 1mm thick sheet plugs, washers,waste pipe and waste coupling including a pair of cantiliver brackets embedded in wall with suitable size PCC (1:3:6) tyoe C-1 blocks and connecting union to pipe of overall size 915mm X 460mm & bowl size 410mmn X 330mm x 160mm , complete all as specified and as directed by the Engineer-in-Charge. | | 58 | Supply and fixing Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed by the Engineer-in-Charge. | | 59 | Material and labour for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3), complete all as specified and as directed by the Engineer-in-Charge. | | 60 | Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar, complete all as specified and as directed by the Engineer-in-Charge. | | 61 | Material and labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles (600x600)mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles, laid over screed bed or bedding layer 20mm thik in cement mortar 1:6 including Dismantling floor, hearth tiling including cement mortar bedding ( but not backing ), removing rubish of the purmises, complete all as specified and as directed by the Engineer-in-Charge. | | 62 | All as per Item No 61 here-in-before but vitrified tiles as in skirting (height of skirting 100mm cuts from tiles 600x600mm), complete all as specified and as directed by the Engineer-in-Charge. | | 63 | Supply and fixing in repair's MS cloth hook plate with six hook per plate fixed with screws to wall, complete all as specified and as directed. | | 64 | Material and labour for PCGI lead lined doors of (45mm thick door) Any come door with door frame 1.5mm thickness, lead door (16gauge) Double door. SS304 Bering Hinges 8nO Door closer 1No, mortice lock set 1 No,Cylinder 1 No, 'D' Handle-SS 304 19mm Dia 254mm 1 No, Hardware Nuts and bolts, Fisher Srew 1 No ,Concealed flush bolt up to 300mm 1 No, 3mm Double Set Gun Tape ino, Silicon Tube 1 No and door drop Set kick plate/ push plate, complete all as specified and as directed. | | 65 | Material and labour for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165, complete all as specified and as directed by the Engineer-in-Charge. | | 66 | Supply and fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed by the Engineer-in-Charge. | | 67 | Excavation over areas n. exc 1.5m deep and getting out in hard/dense soil, complete all as specified and as directed. | | 68 | Excavation over areas exc 1.5m n exc.3m deep and getting out in hard/dense soil, complete all as specified and as directed. | | 69 | Excavation over areas exc 3m n.exc.4.5m deep and getting out in hard/dense soil, complete all as specified and as directed. | | 70 | Excavation over areas exc 4.5m n.exc. 6m deep and getting out in hard/dense soil, complete all as specified and as directed. | | 71 | Removing to excavated, surplus spoil material exc.1.50 km but n exc. 5 km away from MD Land and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and as directed by Engineer-in-Charge. | | 72 | Material and labour for loose filling of broken stone or boulders of gauge 80 to 150 mm as in soakage pits, soakage wells , complete all as specified and as directed by the Engineer-in-Charge. | | 73 | Material and labour for Reinforced concrete pipes, class NP2, laid and jointed complete with collars as specified, complete all as specified and as directed. | | 74 | Material and labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate cement concrete bed to drain pipe including packing under and haunching against side of pipe for 150 mm bore of pipe, complete all as specified and as directed | | 75 | Supply and fixing PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints with solvent cement fixed to walls/flooor incluidng clamping complete all as specified and as directed. | | 76 | Supply and fixing 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed, complete all as specified and as directed. | | 77 | Material and labour for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed by the Engineer-in-Charge. | | 78 | Material and labour for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer, complete all as specified and as directed by the Engineer-in-Charge. | | 79 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed by the Engineer-in-Charge. | | 80 | Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including stove enamelled steel conduit complete with all fittings and accessories,fixed to walls/ceiling, including stove enamelled black steel junction box, with cover and outlets and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly ,complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc, complete all as specified and as directed. | | 81 | Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including stove enamelled steel conduit complete with all fittings and accessories,fixed to walls/ceiling, including stove enamelled black steel junction box, with cover and outlets and including 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 5 Amps socket outlet independent complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc, complete all as specified and as directed. | | 82 | Materials and Labour for point wiring with 4.0 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including stove enamelled steel conduit complete with all fittings and accessories,fixed to walls/ceiling, including stove enamelled black steel junction box, with cover and outlets and including 4.0 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 15 Amps socket outlet independent complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc,complete all as specified and as directed. | | 83 | Materials and labour point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core, drawn through and including PVC casing and capping not less than 20mm size complete with all fittings and accessories, fixed to walls/ ceiling, including sunk cast type pressed steel terminal boxes 1.25mm thick with 2.2 mm plastic laminated sheet (Hylem) top cover for mounting switches/ regulator etc including 1.5 Sqmm PVC insulated unsheathed multistranded (green colour) copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one 3 pin 5 amps switch socket combination on independent board, complete all as specified and as directed by the Engineer-in-Charge. | | 84 | Supply and fixing modular switch flush type single pole one way 5Amp, complete all as specified and as directed by the Engineer-in-Charge. | | 85 | Supply and fixing wall mounting fan 400 mm sweep, 1380 RPM rated speed with minimum air delivery 75 cmm AC single phase 230/240 volts , complete all as specified and as directed by the Engineer-in-Charge. | | 86 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep , heavy duty with, blades, and frame and louvers including cutting of walls for fixing of exhaust fan and make good disturbed surface, complete all as specified and as directed by the Engineer-in-Charge. | | 87 | Supply and fixing ceiling rose ,3phase /PVC /Polycarbonate ,isolate body, complete all as specified and as directed by the Engineer-in-Charge. | | 88 | Supply and fix flame proof rotary type switch with termination box in LM6,16amp single pole 250V, complete all as specified and as directed by the Engineer-in-Charge. | | 89 | Supply and Fix flame proof Ceiling fan with regulator,1200 mm sweep, 48 inch , single phase, complete all as specified and as directed by the Engineer-in-Charge. | | 90 | Supply and Fix flame proof Exhaust fan, 300 mm sweep, 12 inch, single phase, complete all as specified and as directed. | | 91 | Supply and Fix flame proof 5Amp switch socket, complete all as specified and as directed. | | 92 | Supply and Fix flame proof 15Amp switch socket, complete all as specified and as directed. | | 93 | Supply and Fixing LED light fitting 1x18/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size., complete all as specified and as directed by the Engineer-in-Charge. | | 94 | Supply and Fix 100 mm dia.,cast aluminium body LM6, flame proof,weather proof, junction box 4 way terminal with 4 number of 3/4 ET cable entry, protection type Ex-D,Zone 1 & Zone 2,IP-55,Gas Group IIB,Temp Class T6, complete all as specified and as directed. | | 95 | Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including stove enamelled steel conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring, complete including Steel Conduit with fittings etc, removing old materials from site and making good disturbed surfaces of walls, floors etc., complete all as specified and as directed. | | 96 | Supply and Fix flame proof, weather proof enclosure for MCB Distribution Board Single Phase and Neutral, 6 Way with incoming & outgoing terminals chamber, bus bar chamber comprising of 02(Two) Nos. copper bus bars of suitable rating,separate MCB chambers suitable for accommodating 05 (Five) Nos. one number incoming MCB 2P 32A and four number outgoing MCB single pole 6/10 Amp 'C' curve,enclosure made of cast aluminium alloy LM6, weather proof IP65, finished inside and outside with light grey epoxy powder coating, including cable glands, terminals, hardware and mounting arrangement , complete all as specified and as directed. | | 97 | Supply and fix miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA,'C' curve, 6 to 32 Amps, complete all as specified and as directed. | | 98 | Supply and fix miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA,'C' curve, 6 to 32 Amps, complete all as specified and as directed. | | 99 | Material and labour for galvanised steel (Gl) tubing medium grade of dia 40mm with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back- nuts, diminishing pieces, caps, plugs and unions, etc.) and laying in trenches, etc., also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. The rates also include cutting through walls, floors, etc. and their makin good. | | 100 | Material and labour for galvanised steel (Gl) tubing medium grade of dia 25mm with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back- nuts, diminishing pieces, caps, plugs and unions, etc.) and laying in trenches, etc., also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. The rates also include cutting through walls, floors, etc. and their makin good. | | 101 | supply and fixing of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends of size 40 mm dia for iron pipe and fixed | | 102 | supply and fixing of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends of size 25 mm dia for iron pipe and fixed | | 103 | M & L for drilling hole in the existing 150 mm dia CI/DI/PPR pipe & includimg clamp with nuts ,bolts ,washers ,GI fitting and ferrule arrangment including excavation ,return filling ,removing of soil complete all as specified and directed by Engr-in-charge. | | 104 | Excavation in trenches n.exc. 1.5m wide and n.exc1.5m depth for foudation,trenches for laying of cables/pipe line etc. and getting out in soft/loose soil. | | 105 | Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point. | | 106 | Returning, filling in, incl. spreading, levelling, watering and well ramming in layers not exc 25cm in type of soil. | | 107 | M&L for Construction of brick massonry valve pit chamber of inner dimension 120x120x120 cms suitable for sluice valves upto 100mm size, with PCC 1:4:8 type D-2 for foundation, brick work in cm 1:6 rendering 1:4, 15mm plastering, coping in PCC 1:2:4 type B-1, incl necessary earth work, including MS sheet cover of thickness 3.15mm on 50x50x6.0 mm angle iron framework including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement including demolished old valve pit complete all as specified and directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
|