|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : SPL REPAIR TO BLDG NO P-01 (08 QTRS) JCOS MD ACCN OF DSC LINE OF 8 RAJ RIF UNDER GE (I) KANPUR Contract No : GE(I)/KAN/T-139 OF 2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 3 | Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete complete all as specified and directed. |
| 4 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | M&L for cement concrete Type D2 (1:4:8) (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | M&L for sand filling under floor or in foundation including watering and in consolidation complete all as speified and directed. |
| 7 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 & ISI Marked of 80 mm thickness M-35 Grade with grey cement and pigment (Red & yellow) complete all as specified and directed. |
| 8 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path / plinth protection / sub base finished the surfaces even & fair complete all as specified and directed. |
| 9 | Demolition of reinforcement cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 10 | M&L for Nominal mix Type B0 (1:1.5:3) (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors,chajjas, balconies, canopies, deck slabs and in shelves blocks etc and the like complete all as specified and directed. |
| 11 | S&F Formwork to side and soffits of floor and roof beam, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhang,chajjas etc. also splays between floor and roof beam etc. for flat rough finished surface of concrete complete all as specified and directed. |
| 12 | Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed. |
| 13 | M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 14 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 15 | M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling /sub base of flooring complete all as specified and directed. |
| 16 | M&L for 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 17 | M&L, Non-skid ceramic coloured tiles, 7 to 8 mm thick (square/rectangular) of size 400 x 400 mm , as in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 18 | M&L for 600 x 600 mm size 8 to 9mm thick Non skid Ceramic tiles of approved colour as in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement match with shade of tiles complete all as specified and directed. |
| 19 | All as per item No 17.00 above but as in skirting & including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 20 | M&L for glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 21 | S&F of 12 mm thick Stepping tiles as in treads, riser & landings of steps/ aproach, size of tiles / stone shall be 1200mm x600mm from which suitable size landing of steps/ approach shall be cut and applied as per site requirements fixed with Tile adhesive as per manufacturer instruction complete all as specified and directed. |
| 22 | M&L 14-16mm thick Granite (of any type) work (table rubbed and polished) in cooking flatforms, window jambs and cills and like in CM 1:4 including pointing in white cement (1:2) using marble dust & pigment to match with shade of granite and rounding and polishing of edge complete all as specified and directed. |
| 23 | Dismantiling of loose concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling and also remove any existing treatment on RCC surface by rubbing, scrapping etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins ( manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusing necessary form work & scaffolding up to Three storey complete and surface of guniting to be finished fair and even with and including 10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractor on this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separately. |
| 24 | M&L for Mild Steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as directed and specified. |
| 25 | M&L for welded steel wire fabric weight n exc 2 Kg/sqm complete all as specified and directed. |
| 26 | Taking down cement plaster on wall & ceiling including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 27 | M&L for 12mm thick ready to use cement based plaster (Ready mix plaster ) with high quality polymer additive and well graded sand and fillers over wall of brick, stone or concrete including preparing the surfaces clean and made free from dirt,oil grease,concrete sealer or curing compound using a wire brush of mopping. Dampen the surface with clean water. water to be mixed/ preparation of mortar to be done as per manufacturer instruction complete all as specified and directed |
| 28 | All as per item No 26.00 above but 5mm thick on ceiling complete all as specified and directed. |
| 29 | M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 30 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 31 | Supplying and Applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed.Note : The Coverage is to be strictly maintained for film formation. |
| 32 | M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper over a coat of primer & over applying a coat 1 mm of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed. |
| 33 | M&L for preparation of newly plastered surfaces of walls applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and then applying two coats of exterior weather proof anti algae 100% acrylic emulsion over and including a coat of exterior water based primer complete all as specified and directed. (Make : Ist quality of approved make as specified). |
| 34 | Complete removal of any existing treatment using electric drywall orbital sander and applying a coat of 1mm thick wall care putty on wall and rubbing the surface with sander to achieve a smooth surface and sharp straight edges etc.and applying two coats of oil bound distemper (any colour) complete all as specified and directed. |
| 35 | Taking up or down 40 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed. |
| 36 | S&F GI steel tubing 40 mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed. |
| 37 | M&L for cement concrete (1:2:4) Type B0 (using 12.5mm graded stone aggregates), laid in slope towards drainage out spout pipe mixed with waterproofing compound as per manufacturer instructions drainage spouts shall be provided integrally while laying PCC.Fixing of spout shall be done with same PCC as in this item complete all as specified and directed. |
| 38 | M&L preparation of newly plastered surfaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 1.50N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet as per manufacturer's instructions complete all as specified and directed.Note:The contractor shall submit a gurantee of 10 years from the date of completion of work for waterproofing treatment alongwith manufacturer's gurantee. The amount of Rs. 40 ( Forty ) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(I) Kanpur against guarantee money. 2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work. |
| 39 | M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as reqd complete all as specified and directed. |
| 40 | Taking up or down steel tubing and connections of 15 mm bore including fittings of any type and material complete all as specified and directed. |
| 41 | Taking up or down 20 mm dia steel tubing and connection including removal of fittings of any type and material complete all as specified and directed. |
| 42 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 43 | Supplying and laying of 16 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11with all fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 44 | S&F GI steel tubing 20mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed. |
| 45 | S&F in repair 15mm bore bib tap long body, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. |
| 46 | S&F repair 15mm bore angular stop valve chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 47 | S&F repair 15mm bore angle valves,fancy type two way chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 48 | S&F 15 mm bore, brass CP wall mixer (2 in 1) for mixing hot and cold water including provn of overhead shower with 115mm long bend pipe, connected legs and flages including all other connected accessories screwed down for iron pipe complete all as specified and directed. |
| 49 | S&F in repair 15 mm bore, brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed. |
| 50 | S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipes, pedestal & brackets complete all as specified and directed. |
| 51 | S&F 15mm bore PVC connection 600mm long heavy duty with brass fly nut and warsher for hot and cold water complete all as specified and directed. |
| 52 | S&F in repair 10 ltrs capacity low level PVC dual flushing cistern, valveless, syphonic type, white,with inlet,ball float and handle including brackets complete all as specified and directed. |
| 53 | S&F in repair vitreous china wash down water closet pedestal pattern white with plastic seat cover (excluding fixing of bolt of flushing cistern and flush pipe) including all fitting complete all as specified and directed. |
| 54 | S&F for 15 mm bore sink mixer chromium plated with swinging spout (wall mounted model) with connecting legs and wall flanges complete all as specified and directed. |
| 55 | S&F Soap dish, chromium plated incl fixing with connected accessories complete all as specified and directed. |
| 56 | S&F in repair glass shelf chromium plated grills & toughened glass base complete all as specified and directed. |
| 57 | S&F wall mounted towel rack chromium plated 600 mm including fixing with connected accessories complete all as specified and directed. |
| 58 | S&F PTMT cabinet Mirror of size 400 x 500mm incl required accessories complete all as specified and directed. |
| 59 | S&F in repair Towel ring chromium plated dia not less than 15 cm with mounting brackets complete all as specified and directed. |
| 60 | S&F 15 mm dia & 1m long flexible SS braided cord health faucet incl chromium plated wall hook fixed to wall complete all as specified and directed. |
| 61 | S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 62 | S&F in repair stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed. |
| 63 | Dismantling water tanks and remove to store capacity exc 250 ltrs and n exc 500 ltrs complete all as specified and directed. |
| 64 | S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover, float valve, tank adaptor etc including GI nipple of suitable size complete all as specified and directed. |
| 65 | Taking down 75/ 110 mm dia rain water pipes, any pattern with all fittings complete all as specified and directed. |
| 66 | S&F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling complete all as specified and directed. |
| 67 | S&F PVC (SWR) bends 110 mm bore complete all as specified and directed. |
| 68 | Dismantling of 75 to 100 mm dia CI pipes/fittings jointed in cement mortar fixed to wall or laid in trenches and taking out if required complete all as specified and directed. |
| 69 | Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid in floor/trenches complete all as specified and directed. |
| 70 | Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed. |
| 71 | Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid in floor/trenches complete all as specified and directed. |
| 72 | Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed. |
| 73 | S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B1 (using 12.50 mm graded stone aggregate) complete all as specified and directed. |
| 74 | S&F cast iron branch pieces 100mm bore, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 75 | S&F cast iron branch pieces 75mm bore, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 76 | S&F 100mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 77 | S&F 75mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 78 | S&F CI vent cowl of size 75mm / 100 mm dia complete all as specified and directed. |
| 79 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 80 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm including making good dismantled portion by brickwork, concrete (1:2:4) or CM(1:3) and plastering complete all as specified and directed. |
| 81 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm including making good dismantled portion by brickwork,cement concrete (1:2:4) or CM(1:3) and plastering each complete all as specified and directed. |
| 82 | S&F mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 complete all as specified, making good disturbed portion to match existing surface complete all as specified and directed. |
| 83 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet & reinforced with MS square tube and fixing in opening as specification & drawing, complete all as specified and directed. |
| 84 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome complete all as specified and directed. |
| 85 | Fabrication / fixing / supplying of prelaminated HDHMR door shutter of 30mm thick made from exterior grade high density fiber HDF) homogeneous board of lignocellulosic fibrous material – specifically “plantation timbers” like eucalyptus, processed through drum de-barker system to remove slug, mud, sand grit bark & bad fibre, to remove the big fiber and glue lumps pass through the z shifter. Manufactured with homogeneous core, without layers by the mat forming technology, bonded through inhouse prepared glue, continous european pressed by 192 cylinder to control multipoint pressure and tempeture for uniform density profile across length & width, european resin blow line blending for uniform distribution of resin with fibre. Online blow detector, online thickness calibration for uniform thickness control, termite and borer resistance, router exterior grade product with high moisture resistance, calibrated as per grade IS : 12406 : 2003 & ecomarked labelling by ISI for environmental friendly as per norms of ministry of environment,IGBC membership & FSC certified. Supplying & fixing in the frame at site using stainless steel butt hinges of size 100mm 3nos, 200mm SS Handle-2Nos and 150mm SS Tower bolt-2 Nos each door complete all as specified and directed. |
| 86 | S&F for 30mm thick plain WPC factory made wire mesh solid door shutter (confirming as per Is 4020) with density not less than 600 KG/Cum Manufactureed by an ISO 9001-2015 certified company. The door to be pannened with SS mosquito mesh (Wire cloth used shall be of 0.36 mm nominal dia and average width of aperture 1.40mm) for additional strength and safety purpose Door should be fixed with SS hinges and SS screw Door should be water proof fire retardant and having screw holding capacity complete all as per manufacturer specification and drawings and as per direction of EIC and supplying & fixing in the frame at site using stainless steel butt hinges of size 100mm 3nos, 200mm SS Handle-2Nos and 150mm SS Tower bolt-2 Nos each door complete all as specified and directed.Note : Wire cloth used shall be of 0.36 mm nominal dia and average width of aperture 1.40mm and should not paid separately. |
| 87 | S&F 150mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 88 | S&F 150 mm stainless steel barral tower bolt of extruded section fixed with SS screws etc complete all as specified and directed. |
| 89 | S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed. |
| 90 | S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 91 | S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 92 | S&F 300 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 93 | S&F 75mm long stainless steel door stopper of double legged with rubber shoes in bottom complete all as specified and directed. |
| 94 | S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 95 | S&F MS 125mm Butt hinges, heavy weight, cold rolled mild steel fixed into MS frame for caging work etc throgh spot welding complete all as specified and directed. |
| 96 | S&F Pre-Painted steel windows & ventilators with Guard bars & wiremesh shutter. the frame and shutter section should be cut to length and miter joined with corner brackets made of Polypropylene. Mullion section should be joined using nut and bolts. 4mm thick clear float glass to be provided using EPDM gasket all around glass incl all necessary accessories required complete all as specified and directed. Ref TD - CELZ/C-TD/102 sheet 1/1 and 1/2.Note : Net opening will be measured for payment purpose no extra payment will be made for glass or wiremesh. |
| 97 | S&F stainless steel curtain rods of 25mm dia as in doors/ windows SS brackets fancy type including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. |
| 98 | Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed. |
| 99 | Fabrication / Fixing /Supplying of plain HDHMR Board 18mm thick for kitchen, wardrobe shutter made From Exterior Grade High Density Fiber (HDF) Board Of Lignocellulose Fibrous Material – Specifically “ Plantation Timbers” Like Eucalyptus, Processed Through Drum De-Barker System To Remove Slug, Mud, Sand, Grit Bark And Bad Fibre, To Remove The Big Fiber And Glue Lumps Pass Through The Z Shifter Manufactured With Homogeneous Core Without Layers By The European Mat Forming Technology, Bonded Through In house Prepared Glue, Continuous European Pressed By 192 Cylinder To Control Multipoint Pressure And Temperature From Uniform Density Profile Across Length & Width, European Resin Blow Line Blending For Uniform Distribution Of Resin With Fibre, Online Blow Detector, Online Thickness Calibration For Uniform Thickness Control, Having Density Of 850kg/M³, Termite And Borer Resistance, Router Exterior Grade Product With High Moisture Resistance, Calibrated As Per GRADE I IS : 12406 : 2003 & ECOMARKED LABELLING BY ISI FOR ENVIRONMENTAL FRIENDLY AS PER NORMS OF MINISTRY OF ENVIRONMENT, IGBC MEMBERSHIP & FSC CERTIFIED complete all as specified and directed. |
| 100 | M&L 150mm size stainless steel handles of design approved by GE complete all as specified and directed. |
| 101 | S&F of continuous piano hinges brass bright finish or electro galvanished width of flaps when open in 30 mm complete all as specified and directed. |
| 102 | S&F Magnetic catcher heavy duty of approved quality in cupboard / wardrobs including fixing with necessary screws complete all as specified and directed. |
| 103 | Dismantling of terracing tiles/brick tiles single layer on roof,laid bedded and pointed in any mortar complete all as specified and directed. |
| 104 | Demolition by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 105 | M&L for cement concrete type B0 (1:2:4 ) (using 12.5 mm graded stone aggregate) as in padding and coping, incl hunching, benching etc complete all as specified and directed. |
| 106 | M&L for 10 mm thick in CM(1:3) rendering on fair faces concrete surfaces / roof top mixed with liquid water proofing compound finished even & smooth without using extra cement complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 107 | Supply only integral water proofing compound complete all as specified and directed. |
| 108 | M&L preparation of newly plastered sufaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 1.50 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet, the PU coating is to be continued 150mm up the parapets or walls and 100mm into the rainwater pipes. The final coat of Polyurethane coat is to be sprinkled with a micron layer of clean sand if the roof is non-accessible type. For Accessible roof type Roof tiles to be provided.complete as per manufacturer's instructions complete all as specified and directed.Note:The contractor shall submit a gurantee of 10 years from the date of completion of work for waterproofing treatment alongwith manufacturer's gurantee. The amount of Rs. 40 ( Forty ) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(I) Kanpur against guarantee money. 2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work.3. Cost of providing roof tiling will be paid under respective item. |
| 109 | M&L for cool roof ceramic tiles of size 300 x 300mm / 400 x 400 mm, thickness - 8mm of Approved shade, tiles should be anti-skid and have SRI value of more than 90 tiles should be laid on roof using tile adhesive of approved make as per manufacturers instructions complete all as specified and directed.Note : Cost of Tile adhesive shall deemed to be inclusive in the Item. |
| 110 | M&L for grouting using SC Apcorep Injection Grout LV grout.The detail procedure of inject grouting as under:(i) Drilling of 12mm dia holes upto 40mm depth and provide PVC nozzles/ entry ports over grid@ 1m c/c or less depending upon situation.(ii) Before injecting the grout compressed air to be blown to remove all dist and dirt.(iii) Grouting at pressure of 5kg/sqcm to be don till refusal/ rejection or appearance of grout from adjacent nozzle.(iv) Observe the cracks and make V groove along.(v) Nozzles and V groove shall be filled with polymer based mortar. |
| 111 | Removing of demolished meterial to a distance of exc 100m and n exc 200m or under, beyond the lead included in the rates, including loading, unloading complete all as specified and directed |
| 112 | M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of zink chrome red oxide primer complete all as specified and directed. |
| 113 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 114 | S&F in repair 20 mm dia Gun metal globe or gate valve with iron wheel head, screwd both ends for iron pipe complete all as specified and directed. |
| 115 | M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and directed. |
| 116 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete alll as specified and directed. |
| 117 | S&F in repairs chromium plated shower rose 125mm size incl shower arm casted 190 mm long flat shape for wall mounted showers with flange incl fixing to steel pipe or union complete all as specified and directed. |
| 118 | M&L IInd class hard wood for plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed etc all complete all as specified and directed. |
| 119 | M&L for applying two coats of synthetic enamel painting over and including a one coat of pink primer over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed. |
| 120 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed. |
| 121 | M&L for point wiring for one light/fan/bell/exhaust fan point/ controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed. |
| 122 | All as per item No 120.00 above but upto ceiling height and on surface at ceiling complete all as specified and directed. |
| 123 | All as per item No 120.00 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 124 | All as per item No 120.00 above but for one socket outlet 5 amps on indipendent board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 125 | All as per item No 120.00 above but for one socket outlet 5 amps on same board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 126 | M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed. |
| 127 | S&F switch modular type one way 1 module 16 amps 230 Volts complete all as specified and directed. |
| 128 | M&L for socket 6 amps modular type 2/3 pin combined 2 module , 230 volts complete all as specified and directed. |
| 129 | M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and directed. |
| 130 | M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed. |
| 131 | S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed. |
| 132 | M&L for bell push modular type 1 Module one way 6 amps 240 volts complete all as specified and directed. |
| 133 | M&L for bell electric heahy duty Ding Dong type 230 volts single pole complete all as specified and directed. |
| 134 | S&F of LED Aluminium batten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95 ,THD<20% ,Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures. |
| 135 | S&F LED in repair wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W complete all as specified and directed. |
| 136 | S&F PDC Housing LED Bulkhead 10 watt luminaire with opal diffuser, equipped with 2kV in- built surge protection with IP 65 protection rating complete all as specified & directed. |
| 137 | S&F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, complete with one MCCB 4 pole 415 Volts 125Amps rating with rupturing cap 16 KA of the same make as of VTPN distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed. |
| 138 | Supply and fix sheet metal enclosure MCB distribution board, 8 way double door with IP-43 protection with 200 Amp rated bus bar complete all as specified & directed. |
| 139 | S&F amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 140 | S&F amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) 40 to 63 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 141 | M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 Sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 142 | All as per item No 140.00 above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 32 mm dia complete all as specified and directed. |
| 143 | Supply and fixing of Exhaust Fan AC single phase 230/240 volts of size 300mm sweep with louvers. (including cutting holes) complete all as specified and directed. |
| 144 | Supply and fixing Exhaust Fan high quality engineering plastic, resistant to colour change with anti- statio properties (ventil air) 250 mm sweep 35 watt ,1200 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, grouting of nuts, bolts, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side (outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to exhaust fan motor and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed |
| 145 | Supply and fix water heater storage type, electric, capacity 25 Ltr BEE 5 Star complete all as specified and directed. |
| 146 | M&L for earthing with galvanised iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |