|
| 1 | Taking down Chowkats or frames with shutters (without taking of shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm complete all as specified and as directed. |
| 2 | Taking down Chowkats or frames with shutters (without taking of shutters from the frame) area not exceeding 1.5 Sqm complete all as specified and as directed. |
| 3 | Taking down shutter of any description and removing from site each leaf size exceeding 1 Sqm & not exceeding 2 Sqm complete all as specified and as directed. |
| 4 | Taking down & Refixing chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frames) in same opening after necessary repairs complete all as specified and directed by Engr-in-Charge. |
| 5 | Taking down & Refixing chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames) in same opening after necessary repairs complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply & fix second class hard wood plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed. |
| 7 | Supply & Fix 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed. |
| 8 | Supply & Fix second class hardwood skeleton shutter 35 mm thick open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded & rebated sash bars (of any nos) as specified in SSR Part-I Sec 8 Clause. 8.24.(a) as per specification as specified and as directed. |
| 9 | Supply & Fix solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in opening as per specification & drawing |
| 10 | Supply & Fix factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvent cement, supply and fixing in the frame at site as per specification as specified |
| 11 | Supply & Fix in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 12 | Material & labour for two coat of synthetic enamel painting to wooden surfaces (frame & shutter) over a coat of primer including preparation of wooden surface of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed. |
| 13 | Providing & fixing glass panes 5.5mm thick with putty and glazing clips in steel doors, windows, clerestory windows, all complete as directed. |
| 14 | Supply & Fix aluminium anodised Hasp and staple 75mm, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified |
| 15 | Supply & Fix 100 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified. |
| 16 | Supply and fix Extruded aluminium alloy handles, 100mm long fabricated type, anodised complete all as specified. |
| 17 | Supplying and fixing of powder coated aluminium work (minimum thickness of powder coating 50 micron) for fixed portion of doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling CP brass / stainless steel screws, all complete as per architectural drawings and the directions of Engr -in- Charge. (Glazing, panelling and dash fasteners to be paid for separately) (minimum thickness of powder coating 50 micron) complete all as specified and directed by Engg-in-charge. |
| 18 | Supplying and fixing of powder coated aluminium work (minimum thickness of powder coating 50 micron) for shutters of doors, windows (sliding) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling CP brass / stainless steel screws, all complete as per architectural drawings and the directions of Engr -in- Charge. (Glazing, panelling and dash fasteners to be paid for separately) complete all as specified and directed by Engg-in-charge.(Fittings shall be paid for separately). |
| 19 | Supply & Fix 100 mm long Stainless Steel butt hinges medium weight cold rolled complete all as specified. |
| 20 | Supply & Fix 200mm aluminium anodised of extruded section barrel tower bolts complete all as specified. |
| 21 | Supply & Fix 150mm long aluminium handles cast type anodised complete all as specified. |
| 22 | Supply & Fix in repairs 100 mm long Stainless Steel butt hinges medium weight cold rolled complete all as specified. |
| 23 | Supply & Fix in repairs 300 mm long Aluminium allow anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 24 | Supply and fix in repairs floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate 150mm complete all as specified. |
| 25 | Supply & Fix in repairs fancy type decorative Drapery rod of 20mm dia for window and doors with curtain rings and decorative doom holders fixed to wall with screw complete all as specified. |
| 26 | Supply & Fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 27 | Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones |
| 28 | Supply & Fix 3 mm thick sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as directed. |
| 29 | Supply & Fix figured glass 3 mm thick, pin head type & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as directed. |
| 30 | Supply & Fix door closer (aluminium extruded body section) hydraulically regulated, designation No 1 universal type, suitable for door shutters up to 700mm in width and of weight not more than 35Kg complete all as directed. |
| 31 | Supply & Fix 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. |
| 32 | Supply & Fix in repair sinks made of stainless steel of 1 mm thick, overall size 495 x 420 mm bowl size 410 mm x 330 mm x 160 mm kitchen sink with plug washers and wastes, SS 304 including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed. |
| 33 | Supply & Fix stainless steel kitchen plate rack size 36\\" x 32\\" x 12\\", SS 304 complete all as specified and directed. |
| 34 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets. |
| 35 | Supply & Fix 4mm thick ply wood grade BWR (type BB) fixed with nails to the timber frame work as in wall complete all as specified. |
| 36 | Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour, pattern and size as approved, fixed with approved adhesive as per manufacturer’s instructions on horizontal and vertical surfaces etc. complete all as specified and as directed. |
| 37 | Material and labour for 4mm thick one side decorative group match veneer complete all as specified and as directed. |
| 38 | Dismantling of timber scantling 40 sq .cm and over in section, in any position |
| 39 | Material & labour for second class hard wood in scantling wrought, timber framed & fixed complete all as specified and directed. |
| 40 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 41 | Supply & Fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 42 | Material & labour for applying two coat of synthetic enamel paint on steel surfaces over one coat of zinc primer including preparation of new steel surfaces exceeding 10 cm width or girth complete all as specified and directed. |
| 43 | Taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 44 | Material & labour for rendering 10mm thick plaster on fair faces of brick work or concrete surfaces (1:6) finished the surface even and Smooth without extra cement complete all as specified and directed. |
| 45 | Material & labour for two coats of oil bound distemper over a coat alkali resistant primer to newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
