Indian Tenders

Tender Notice

TDR 55642510
Tendering Authority Kerala Water Authority
Tender No 05/2026-27/EE/PH/PKD
Tender ID 2026_KWA_852531_1
Tender Brief Tender For State Plan-State Plan -2025-26 Providing Infrastructure To Accomodate Scada Facility Above The Ph Circle Office Building-State Plan 2025-26 - Providing Infrastructure To Accomodate Scadafacility Above Circle Office Palakkad In Connection W
City Palakkad
State Kerala
Document Fees INR 2760 /-
EMD INR 50000.0 /-
Tender Value INR 29.17 Lakhs /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender for State Plan-State Plan -2025-26 Providing Infrastructure To Accomodate Scada Facility Above The Ph Circle Office Building-State Plan 2025-26 - Providing Infrastructure To Accomodate Scadafacility Above Circle Office Palakkad In Connection With Amrut 24X7 Andother Automation Works-General Civil Work

Key Dates

Publish Date 22-05-2026
Last Date of Bid Submission 05-06-2026
Tender Opening Date 06-06-2026

Contact Information

Company Name Kerala Water Authority
Contact Person Executive Engineer
Address O/o Office of the Executive Engineer, P H Division Palakkad

BOQ Items

Name of Work:- State Plan-STATE PLAN -2025-26 Providing infrastructure to Accomodate SCADA facility above the PH Circle Office building-State Plan 2025-26 - Providing infrastructure to Accomodate SCADAfacility above Circle Office Palakkad in Connection with AMRUT 24x7 andother automation works-General Civil Work
Sl. No. Item Description
1Construction of Centralised data processing and control unit
215.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
350.6.1.3:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
45.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
55.11.1:Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
65.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
75.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
813.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
913.22:Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
1013.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1113.48.3:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
1211.41.3:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm
1317.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
1417.3.1:Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
1517.5.4:Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Range of four half stall urinals with 10 litre PVC. automatic flushing cistern
1621.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
1721.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
189.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
19OD198426/2025-2026:Provision for internal Plumbing works for water supply arrangements to Wash rooms
20OD198486/2025-2026:Supply, Installation & Commissioning of Solar Power including Solar panel of capacity 7KW as on grid as per ANERT specification having 5 years guarntee for 80 % production.
21OD242157/2025-2026:Supplying and fitting 2KVA on line UPS and Supplying 12 V, 100A Batteries of 4 nos. for 2KVA on line UPS for 3 Hr Backup should have 2 yrs guarantee.
22OD242174/2025-2026:Supply and Installation of 43 inches 4K Ultra HD Smart LED Google TV with all accessories should have minimum 2 years guarantee.
23OD242181/2025-2026:All in one PC with Server Capasity of 32 GB RAM - C21GLPA HP AiO 24-cr0485in PC 24 Intel i5-1354U NA Windows 11 Microsoft Office Home & Student Edition 2024 + 1 Year M365 Basic 32GB DDR4 1TB SSD Graphics UMA , USB type C , USB type A , RJ 45 , 1 HDMI Out Wireless 24 inch Antiglare IPS & FHD IR Tiltable Camera Shell White should have 2 yrs minimum gurantee.
24OD242548/2025-2026:Projector LCD -4000 luminous brigthness minimum, with wireless and HDMI connectivity with PC and other systems, resolution 1280 x 768 minimum, including table top vertical tripod base, with Display white screen unit (8 x 6 Feet Tripod Projector Screen) with focus, angle change and skew correction facilities. Minimum 2 years guarante
25OD242549/2025-2026:Supply and fixing sound sysytem with mic (Includes Amplifier 2 Mic, 2 Aux Inputs and CD/Stereo input (L&R), Built-in MP3 player with remote control for USB, SD/MMC card reader min 200 W out put -- 2 nos. of Speakers of 200 W,each floor standing type with auxillary connectivity technology -- 1 n. of Head band microphone can be connected to the amplifier directly HBM-60CC with free Maxcord brand pin. --- 1 no. of 98 XLR Unidirectional Dynamic Microphone corded Mic) with all connections, minimum 2 yers guarantee
26OD264338/2025-2026:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminatedsheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor singlecore cable etc as required. Group A ( DAR - Electrical - Spec Code -1.1.1)
27OD266020/2025-2026:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps(DAR - Electrical - Spec code - 2.14.3)
28OD266147/2025-2026:Supplying and Fixing reputed make Wall mounted Fan
29OD266148/2025-2026:Supply and Fixing LED Tube
30OD266188/2025-2026:Supply and Fixing Exhaust Fan Please Enable Macros to View BoQ information

Other Detail

Information Source https://etenders.kerala.gov.in
Download FileName File Description File Size
Download 935a8dee-f334-45f9-9bff-873242334848.html Tender Documents 0 KB
Download BIDsDOC.pdf Tender Documents 0 KB
Download BOQ_1440518.xls Tender Documents 0 KB
Download KWAGeneralConditionsforeT_1.pdf Tender Documents 0 KB
Download NIT.pdf Tender Documents 0 KB
Download Specialconditions.pdf Tender Documents 0 KB
Download Tendernotice_1.pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.