Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: EXECUTIVE ENGINEER PROVINCIAL DIVISION, BATHINDA NAME OF WORK:- Renovation Of Circuit House, Bathinda Contract No: Composite Works Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Work Name CSR ITEM NO Quantity Unit RateRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | CIVIL HEAD 1 : NEW WASHROOMS & PARTITIONS IN CIRCUIT HOUSE BATHINDA |
| 3 | Dismantling brick work tile, masonry or tile lining (b) In cement |
| 4 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 5 | Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type |
| 6 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth |
| 7 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. |
| 8 | 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in1:4 cement mortar in superstructure |
| 9 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 10 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. |
| 11 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 12 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 13 | Cold twisted detormed (Ribbed/Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works,where not including in the complete rate of RCC including bending and binding placing in position complete |
| 14 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at1.65 Kg per sqm laid hot and sanded |
| 15 | 12.5 mm thick cement plaster 1:5 |
| 16 | 20mm thick cement plaster 1:5 in two coat work |
| 17 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 18 | Providing andapplying plaster of paris (ISI markedsuchasJK,Kohinoor,Maharajaetc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge. |
| 19 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 20 | Wall painting with plastic emulsion paint of approved brand and manufacturer togivean even shade (two or more coats) |
| 21 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 22 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) |
| 23 | For fixed portion and chawkhats |
| 24 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required |
| 25 | Providingand fixingglazing inaluminum door, window, ventilator shutters and partitions etc. withPVCPlug/ neoprene gasket etc. complete as per the architectural drawingsand thedirections ofengineer-in-charge. (Costofaluminum snap beading shall be paid in basic item) |
| 26 | Float glass panes of 5 mm thickness |
| 27 | Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge. |
| 28 | 4mm thick ACP Sheet |
| 29 | ProvidingPolyester Powder coating 50micron any coloured specified to alumnumsection of varioussizes includingcarriageofmaterial from market to workshop & workshop to site of work. |
| 30 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppersandscrewetc. for these fittings (Excluding sliding bolt) |
| 31 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers including ramming, watering and consolidated leadupto 1000 metres Labour Rate Only |
| 32 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 33 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 |
| 34 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 35 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. |
| 36 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 37 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 38 | CIVIL HEAD 2 :Renovation 2 no. Room (1-2) CM Suite Of Circuit House, Bathinda |
| 39 | Scraping Of Colour Wash and White Wash |
| 40 | scraping of cement plaster |
| 41 | 12.5 mm thick cement plaster 1:5 |
| 42 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 43 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 44 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 45 | Removing Door s and Windows(Steelorwood) with chowkhats bymaking recesses inwalls when the wall is not to be dismantled. (A)Doors of area 3 sqm and below. |
| 46 | Removing Door s and Windows(Steelorwood) with chowkhats bymaking recesses inwalls when the wall is not to be dismantled. (b) Windows of area 3 sqm and below. |
| 47 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc.complete ISI designation no I (Size of door up to 700mm) |
| 48 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness |
| 49 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and to the entire satisfaction of engineer-in- charge. |
| 50 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 51 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)Size 600x600 mm |
| 52 | Extra Cost for using darker fast shade Vitrified or Rectified Tiles instead of lighter shades. |
| 53 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm. |
| 54 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 55 | Providing and fixing teak wood beading to door windows chowkats with iron screwsfixed in position complete as per design and shape required (a) 50mmx12mm |
| 56 | Painting two or more coats Italian Pigmented PU white glossy or matt in all shades on wood work surface to give an even shade |
| 57 | Deodar wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. (B)Single Rebate (60mm x 100mm) |
| 58 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999 |
| 59 | Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, ISI marked complete in all respect as per the directions of Engineerin-charge. |
| 60 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made. (A)Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 61 | CIVIL HEAD 3 :Renovation Of VIP Rooms At Ground Floor Of Circuit House, Bathinda |
| 62 | Scraping Of Colour Wash and White Wash |
| 63 | scraping of cement plaster |
| 64 | 12.5 mm thick cement plaster 1:5 |
| 65 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 66 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 67 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 68 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc.complete ISI designation no I (Size of door up to 700mm) |
| 69 | Providing and fixing glazing in aluminumdoor, window, ventilator shutters andpartitions etc. with PVC Plug/ neoprenegasket etc. complete as per thearchitectural drawings and the directionsof engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item)Float glass panes of 5 mm thickness |
| 70 | Dismantling aluminium/ Gypsum partitions,doors, windows, fixed glazing and false ceiling including disposal of unserviceable material andstacking of serviceablematerial within 50 meters lead as directed by Engineer-in-charge |
| 71 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and to the entire satisfaction of engineer-in- charge. |
| 72 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal ofmalbaatasuitableplacewithina distanceof100Mtrsof thecomplexcomplete in all respect. |
| 73 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 74 | Extra Cost for using darker fast shade Vitrified or Rectified Tiles instead of lighter shades. |
| 75 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm. |
| 76 | Providing and fixing 1st quality ceramic glazedwall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black ofsize 600 x600 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 77 | Providing and fixing teak wood beading to door windows chowkats with iron screws fixed in position complete as per designand shape required |
| 78 | Painting two or more coats Italian Pigmented PU white glossy or matt in all shades on wood work surface to give an even shade Including |
| 79 | Removing Door s and Windows(Steelorwood) with chowkhats bymaking recesses inwalls when the wall is not to be dismantled. Doors of area 3 sqm and below. |
| 80 | Deodar wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. (B)Single Rebate (60mm x 100mm) |
| 81 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999 |
| 82 | Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, ISI marked complete in all respect as per the directions of Engineerin-charge. |
| 83 | Removing Door s and Windows(Steelorwood) with chowkhats bymaking recesses inwalls when the wall is not to be dismantled. (b) Windows of area 3 sqm and below. |
| 84 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made. (A)Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 85 | CIVIL HEAD 4 :Renovation Of VIP Rooms At Ground Floor Of Circuit House, Bathinda |
| 86 | Scraping Of Colour Wash and White Wash |
| 87 | scraping of cement plaster |
| 88 | 12.5 mm thick cement plaster 1:5 |
| 89 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 90 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 91 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 92 | Providing and fixing hydraulic door closerISI mark with necessary screw etc.complete |
| 93 | Providing and fixing glazing in aluminumdoor, window, ventilator shutters andpartitions etc. with PVC Plug/ neoprenegasket etc. complete as per thearchitectural drawings and the directionsof engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) |
| 94 | Dismantling aluminium/ Gypsum partitions,doors, windows, fixed glazing and false ceiling including disposal of unserviceable material andstacking of serviceablematerial within 50 meters lead as directed byEngineer-in-charge |
| 95 | Providing and Fixing ceiling consisting of 12.5mmthick Gypsum Board of any size G.I. Cradlinghanged from the ceiling by means of G.I. hangercomplete as per drawings,specifications and totheentire satisfaction of engineer-in- charge. |
| 96 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal ofmalbaatasuitableplacewithina distanceof100Mtrsof thecomplexcomplete in all respect. |
| 97 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 98 | Removing Door s and Windows(Steelorwood) with chowkhats bymaking recesses inwalls when the wall is not to be dismantled. Doors of area 3 sqm and below. |
| 99 | Deodar wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. (B)Single Rebate (60mm x 100mm) |
| 100 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999 |
| 101 | Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, ISI marked complete in all respect as per the directions of Engineerin-charge. |
| 102 | Removing Door s and Windows(Steelorwood) with chowkhats bymaking recesses inwalls when the wall is not to be dismantled. (b) Windows of area 3 sqm and below. |
| 103 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made. (A)Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 104 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 105 | CIVIL HEAD 5 :Renovation Of VIP Rooms At Ground Floor Of Circuit House, Bathinda |
| 106 | Scraping Of Colour Wash and White Wash |
| 107 | scraping of cement plaster |
| 108 | 12.5 mm thick cement plaster 1:5 |
| 109 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 110 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two ormore coats over one priming coat to give an even shade |
| 111 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 112 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete ISI designation no I (Size of door up to 700mm) |
| 113 | Providing&Fixing glass pane swith nails and putty5.0mm thick Plate glass (INDIAN |
| 114 | Providing and Fixing ceiling consisting of 12.5 mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings , specifications and to the entire satisfaction of engineer-in- charge. |
| 115 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal ofmalbaatasuitableplacewithina distanceof100Mtrsof thecomplexcomplete in all respect. |
| 116 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 117 | Removing Door s and Windows(Steelorwood) with chowkhats bymaking recesses inwalls when the wall is not to be dismantled. Doors of area 3 sqm and below. |
| 118 | Factory manufactured Solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code Commercial with elm or gurjanfacing on both \ Sides withlaminated core and lipped edges:-35 mm thick |
| 119 | Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, ISI marked complete in all respect as per the directions of Engineerin-charge. |
| 120 | CIVIL HEAD 6 :Renovation Of Dinning & Enterance Of Circuit House, Bathinda |
| 121 | Scraping Of Colour Wash and White Wash |
| 122 | scraping of cement plaster |
| 123 | 12.5 mm thick cement plaster 1:5 |
| 124 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 125 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 126 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 127 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 128 | Providing and fixing hydraulic door closerISI mark with necessary screw etc.complete iSI designation no I (Size of door up to 700mm) |
| 129 | Providing&Fixing glass pane swith nails and putty5.0mm thick Plate glass (INDIAN |
| 130 | Providing and Fixing ceiling consisting of 12.5mmthick Gypsum Board of any size G.I. Cradlinghanged from the ceiling by means of G.I. hangercomplete as per drawings,specifications and totheentire satisfaction of engineer-in- charge. |
| 131 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal ofmalbaatasuitableplacewithina distanceof100Mtrsof thecomplexcomplete in all respect. |
| 132 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 133 | Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 134 | Providing and fixing 1st quality ceramic glazedwall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black ofsize 600 x600 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in whitecement mixed with pigment of matching shadecomplete. |
| 135 | Providing and fixing teak wood beading todoor windows chowkats with iron screwsfixed in position complete as per designand shape required |
| 136 | Painting two or more coats Italian PigmentedPU white glossy or matt in all shades on woodwork surface to give an even shade Including |
| 137 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) |
| 138 | For fixed portion and chawkhats |
| 139 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required |
| 140 | Providingand fixingglazing inaluminum door, window, ventilator shutters and partitions etc. withPVCPlug/ neoprene gasket etc. complete as per the architectural drawingsand thedirections ofengineer-in-charge. (Costofaluminum snap beading shall be paid in basic item) |
| 141 | ProvidingPolyester Powder coating 50micron any coloured specified to alumnumsection of varioussizes includingcarriageofmaterial from market to workshop & workshop to site of work. |
| 142 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppersandscrewetc. for these fittings (Excluding sliding bolt) |
| 143 | Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS316 Grade Stainless steel Spider.& bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non star bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. |
| 144 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge |
| 145 | Removing Door s and Windows(Steelorwood) with chowkhats bymaking recesses inwalls when the wall is not to be dismantled. (A)Doors of area 3 sqm and below. |
| 146 | Deodar wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. (B)Single Rebate (60mm x 100mm) |
| 147 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999 |
| 148 | Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, ISI marked complete in all respect as per the directions of Engineerin-charge. |
| 149 | CIVIL HEAD 7 :Special Repair Of terrace And Outer Infrastructure Of Circuit House, Bathinda |
| 150 | Finishing walls with acrylic smooth exterior paintof required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of waterproofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 151 | Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded). |
| 152 | Washing concrete surface scrubbing withbrushes including preparing and laying slurry Labour Rate Only |
| 153 | Applying bitumen on roof including heating and carrying to roof. |
| 154 | Cost Of New Tiles |
| 155 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 156 | 20mm thick cement plaster 1:4 in two coat work |
| 157 | Credit of Old doors |
| 158 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 159 | Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications |
| 160 | Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type |
| 161 | Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 finesand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge. |
| 162 | Providing and laying 60mm thick factory made cement concrete interlocking paver blockof M-35 grade machine made rubber moulded smooth finish withs trong vibratory processo r with vibro hydraulic compaction machine andof approved size and design/shape laid in OrdinaryGreyand pattern over and including 40 mm thick compactedbedof coarsesand, filling the joints withfinesandetc,all c ompleteasperdirectionsofEngineer-in-Charge |
| 163 | CIVIL HEAD 8 :Special Repair Of terrace And Outer Infrastructure Of Circuit House, Bathinda |
| 164 | Dismantling brick work tile, masonry or tile lining in cement |
| 165 | Credits Of Bricks |
| 166 | Credits Of Brick Bats |
| 167 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres. |
| 168 | Cement concrete 1:5:10 with 40 mm gauge stone ballast. using concrete mixing volumetric type |
| 169 | Shutteringfor facesofconcretefoundationsandfoundation beam & plinth beam (vertical or battering |
| 170 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 171 | Centering and shuttering for columns (Square or rectangular or poly gonal in plain) |
| 172 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 173 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth. |
| 174 | Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete |
| 175 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. |
| 176 | Credits Of old windows |
| 177 | 20 mm thick cement plaster 1:5 |
| 178 | 12.5 mm thick cement plaster 1:5 |
| 179 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish |
| 180 | Finishingwallswith acrylic smooth exterior paintof requiredshadewithtwoormorecoats applied @ 1.67 litre/10Sqm over and includingbasecoatofwaterproofingCement Paint applied @ 2.20 Kg/10 Sqm |
| 181 | Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws orwelding rod, complete fixed in position. |
| 182 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taken only from outside the premises laying in plinth in 15 cm layers including ramming, watering and consolidating including all leads. |
| 183 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taken only from outside the premises laying in plinth in 15 cm layers including ramming, watering and consolidating including all leads. |
| 184 | Applying priming coat withmetal primer on new steelor ironworkincludingpreparationo surface. |
| 185 | Painting two rmore coats excluding priming coat with synthetic enamel paint inall shades on woodwork,metallic or plastered,concrete surface to give an even shade. |
| 186 | Electrical Services |
| 187 | Repair / Renovation of VIP Room 1 & 2 |
| 188 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: |
| 189 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 190 | Wiring fan point (Without fan box) |
| 191 | Wiring light point |
| 192 | Wiring call-bell point |
| 193 | Wiring 6Amp. wall socket point |
| 194 | Wiring 6Amp. Plug control comprising wall socket point |
| 195 | Wiring 16/20Amp. power plug control point |
| 196 | Wiring light point without control switch. |
| 197 | Wiring light point with double control switches. |
| 198 | RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 199 | Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 200 | Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. |
| 201 | RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 202 | Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 203 | Wiring Networking socket point RJ45 (one module) |
| 204 | Wiring Telephone socket point RJ11 (one module) |
| 205 | Supply and erection of CAT 6 with 23AWG solid bare copper conductor, special grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP) industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (10GBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 206 | CAT 6 LAN cable |
| 207 | PVC INSULATED FR COPPER CONDUCTOR CABLES: |
| 208 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 209 | Overall size 1.5sq.mm (Un-sheathed) |
| 210 | Overall size 2.5sq.mm (Un-sheathed) |
| 211 | Overall size 4sq.mm (Un-sheathed) |
| 212 | Overall size 10sq.mm (Un-sheathed) |
| 213 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: |
| 214 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 215 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 216 | Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 217 | Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed) |
| 218 | MINIATURE CIRCUIT BREAKERS: |
| 219 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 220 | MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 221 | MCB Triple Pole 40amp. (10kA, Curve-C) |
| 222 | MCB Triple Pole 50, 63amp. (10kA, Curve-C) |
| 223 | MCB Four Pole 40amp. (10kA, Curve-C) |
| 224 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: |
| 225 | Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- |
| 226 | TP&N Horizontal Double Door Distribution Board 4 way each |
| 227 | Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:- |
| 228 | TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp) |
| 229 | MCCB's (MOULDED CASE CIRCUIT BREAKER): |
| 230 | Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- |
| 231 | MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting |
| 232 | COPPER EARTHING: 8 SWG COPPER EARTHING : Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- |
| 233 | Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long |
| 234 | Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:- |
| 235 | Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed) |
| 236 | HEAVY GAUGE WELDED CONDUIT PIPES: |
| 237 | Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- |
| 238 | Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan. |
| 239 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- |
| 240 | Ceiling Rose (Flush Piano type) |
| 241 | Call Bell 220/230 volts AC Ding Dong |
| 242 | Supply and erection of Slim Recessed mounted, Round downlighter 18 watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with CRCA sheet with control gear (IP 20 protection), THD<10%, CRI minimum 70, Low power LED with wattage Less 1 Watt, Surge Protection 2.5KV and above as per IS/ IEC Standards, efficacy of LED fixture minimum 100 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 243 | Supply and installation of Floor standing Modern lamp with Metal (gold/brass finish) Body Material, Matte/Brushed gold Finish, Heavy round base for stability, Open oval cage design in center, Lighting Bulb Holder Likely E27 (standard) with minimum 10W LED Bulb warm white. Complete in all respects as approved and desired by the Engineer/Architect in charge at site along with 2 year standard warranty. |
| 244 | Supply and installation of minimum 9-10W Warm White Wall Light (Wall Fixture) with E.27 holder (standard bulb fitting), Golden / Brass finish, Globe (round glass) top + vertical rod style with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 245 | Supply and installation of 6W AC LED Table Lamp with Warm White, Neutral White, Cool White (3-step change) Colour Temperature, Touch Control, 3-level dimming (low / medium / high) Input Voltage 220–240V AC with 420 lumens, Adjustable direction for focused lighting Energy Efficient LED ,ABS plastic body (durable & lightweight) with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 246 | Supply and installation of Antique Nickel Single Wall Light with E27 (standard screw type) LED Warm White with 9W LED bulb, Diffuser/Shade: Glass / Decorative Shade, Input Voltage: 220–240V AC, 50 Hz with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 247 | Supply and installation of one feet LED batten 10W Cool White, minimum 1000 lumens, Input Voltage 220–240V AC, 50 Hz, with In-built constant current LED driver with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 248 | Supply & Installation of 12V.150AH Lead Acid tabular Battery including connection & testing. Complete in all respect as per entire satisfaction of the Engineer in charge. |
| 249 | Supply & Installation of Stand for inverter &Tray for 2 Batteries including connection & testing. Complete in all respect as per entire satisfaction of the Engineer in charge. |
| 250 | Supply & Installation of 2KVA 24V Sinewave Heavy-duty inverter with in-built MCB connection & testing. Complete in all respect as per entire satisfaction of the Engineer in charge. |
| 251 | Supply Installation Testing and Commissioning of Display: 43 inch, 350 nits Brightness, Smart Android OS, 4k UHD Resolution, 3840*2160(UHD), Screen Mirroring through Airplay/Chromecast, Direct LED, Digital Audio Out(Optical), Wi-Fi, 178 Degree viewing Angle, Landscape/Portrait/Tilt Installation, IP/RS232C Control, 10W Speakers, HDMI 2.1(s), USB (2), Bluetooth Audio Playback, Power Supply (AC 100-240v, 50/60 Hz). 4k HDR visual Experience through 4k Processor a7, Ai 4k Gen8, Motion flow XR. VESA Compatible 200*200(mm). Magic Remote. Complete in all respects as desired by the Engineer-in-charge at site. |
| 252 | Supply and erection of COB Downlights 9/10W LED Recess Mounted with High quality extruded aluminium with efficacy of COB LED fixture and clear difuser more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. 2 year warranty including their drivers. complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 253 | Supply and erection of 9 Fin Oil Filled Heater minimum 2000W Autocut CRCA metal body with 3 Heat Settings selectable modes. Input Voltage: 220–240V AC, 50 Hz. Complete in all respects as approved and desired by the Engineer in charge at site. |
| 254 | Supply and erection of Plastic Body 250MM, 10\\" Ventilation Fan including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. |
| 255 | Supply and erection of Ceiling Fans 900 mm Sweep (36\\") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site. |
| 256 | Supply and erection of Ceiling Fan 1200mm , 48\\" Decorative Fan suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufacturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site. |
| 257 | Repair / Renovation of Room No 3 to 10 |
| 258 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: |
| 259 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 260 | Wiring light point |
| 261 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: |
| 262 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 263 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 264 | MINIATURE CIRCUIT BREAKERS: |
| 265 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 266 | MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 267 | MCB Double Pole 40amp. (10kA, Curve-C) |
| 268 | MCB Four Pole 40amp. (10kA, Curve-C) |
| 269 | COPPER EARTHING: 8 SWG COPPER EARTHING : Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- |
| 270 | Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long |
| 271 | Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:- |
| 272 | Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed) |
| 273 | HEAVY GAUGE WELDED CONDUIT PIPES: |
| 274 | Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- |
| 275 | Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan. |
| 276 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- |
| 277 | 6/10amp. One Way Modular Switch (One Module) |
| 278 | 16/20amp. One Way Modular Switch with Indicator (One Module) |
| 279 | 6/10amp. One Way Modular Bell Push (One Module) |
| 280 | 6amp. 2/3 Universal Modular Shuttered Socket (two Module) |
| 281 | 25amp. Universal Modular Shuttered Socket (two Module) |
| 282 | Step type Modular Electronic Fan Regulator 100watts (Two Module) |
| 283 | Modular TV Socket (One Module) |
| 284 | Modular Telephone Socket (RJ-11) One Module |
| 285 | Ceiling Rose (Flush Piano type) |
| 286 | Call Bell 220/230 volts AC Ding Dong |
| 287 | Supply and installation of Floor standing Modern lamp with Metal (gold/brass finish) Body Material, Matte/Brushed gold Finish, Heavy round base for stability, Open oval cage design in center, Lighting Bulb Holder Likely E27 (standard) with minimum 10W LED Bulb warm white. Complete in all respects as approved and desired by the Engineer/Architect in charge at site along with 2 year standard warranty. |
| 288 | Supply and installation of 6W AC LED Table Lamp with Warm White, Neutral White, Cool White (3-step change) Colour Temperature, Touch Control, 3-level dimming (low / medium / high) Input Voltage 220–240V AC with 420 lumens, Adjustable direction for focused lighting Energy Efficient LED ,ABS plastic body (durable & lightweight) with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 289 | Supply and installation of minimum 9-10W Warm White Wall Light (Wall Fixture) with E.27 holder (standard bulb fitting), Golden / Brass finish, Globe (round glass) top + vertical rod style with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 290 | Supply and installation of one feet LED batten 10W Cool White, minimum 1000 lumens, Input Voltage 220–240V AC, 50 Hz, with In-built constant current LED driver with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 291 | Supply and erection of 3- star rating AC Ceiling Fan 1200mm (48\\") Suitable for 230 V single with double ball bearing, copper wound, full aluminium body, 3No. Of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air delivery of 218 CMM. The rated speed of the product must be minimum of 350 revolutions per minutes and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufacture's guarantee/warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfication of the Engineer in-charge at site. |
| 292 | Supply and erection of Wall Fan Plastic Body 400MM, 16\\" including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. |
| 293 | Supply and erection of Plastic Body 250MM, 10\\" Ventilation Fan including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. |
| 294 | Supply & Installation of 12V.150AH Lead Acid tabular Battery including connection & testing. Complete in all respect as per entire satisfaction of the Engineer in charge. |
| 295 | Supply & Installation of Stand for inverter &Tray for 2 Batteries including connection & testing. Complete in all respect as per entire satisfaction of the Engineer in charge. |
| 296 | Supply & Installation of 2KVA 24V Sinewave Heavy-duty inverter with in-built MCB connection & testing. Complete in all respect as per entire satisfaction of the Engineer in charge. |
| 297 | Supply and erection of electric room heater blower minimum 2000W with inbuilt thermostat and automatic thermal cut-off (auto cut) with Multiple Heat Settings, suitable for 230V AC supply. Complete in all respects as approved and desired by the Engineer in charge at site. |
| 298 | Repair / Renovation of Meeting Hall & Dining Hall |
| 299 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: |
| 300 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 301 | Wiring fan point (Without fan box) |
| 302 | Wiring light point |
| 303 | Wiring 6Amp. wall socket point |
| 304 | Wiring 6Amp. Plug control comprising wall socket point |
| 305 | Wiring 16/20Amp. power plug control point |
| 306 | Wiring light point without control switch. |
| 307 | RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 308 | Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 309 | Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. |
| 310 | RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 311 | Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 312 | Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. universal Socket (shuttered) and 2Nos. 16/20Amp. switch with indicator (Modular accessories). |
| 313 | RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): |
| 314 | Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 315 | Wiring Networking socket point RJ45 (one module) |
| 316 | PVC INSULATED FR COPPER CONDUCTOR CABLES: |
| 317 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 318 | Overall size 1.5sq.mm (Un-sheathed) |
| 319 | Overall size 2.5sq.mm (Un-sheathed) |
| 320 | Overall size 4sq.mm (Un-sheathed) |
| 321 | Overall size 10sq.mm (Un-sheathed) |
| 322 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: |
| 323 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 324 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 325 | Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed) |
| 326 | MINIATURE CIRCUIT BREAKERS: |
| 327 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 328 | MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 329 | MCB Four Pole 40amp. (10kA, Curve-C) |
| 330 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: |
| 331 | Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- |
| 332 | TP&N Horizontal Double Door Distribution Board 4 way each |
| 333 | COPPER EARTHING: 8 SWG COPPER EARTHING : Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- |
| 334 | Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long |
| 335 | Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:- |
| 336 | Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed) |
| 337 | HEAVY GAUGE WELDED CONDUIT PIPES: |
| 338 | Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- |
| 339 | Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan. |
| 340 | Supply and erection of CAT 6 with 23AWG solid bare copper conductor, special grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP) industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (10GBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 341 | CAT 6 LAN cable |
| 342 | Supply and installation of minimum 9-10W Warm White Wall Light (Wall Fixture) with E.27 holder (standard bulb fitting), Golden / Brass finish, Globe (round glass) top + vertical rod style with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 343 | Supply and erection of 3- star rating AC Ceiling Fan 1200mm (48\\") Suitable for 230 V single with double ball bearing, copper wound, full aluminium body, 3No. Of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air delivery of 218 CMM. The rated speed of the product must be minimum of 350 revolutions per minutes and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufacture's guarantee/warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfication of the Engineer in-charge at site. |
| 344 | Supply and erection of Heavy duty Exhust Fans 300mm sweep 900RPM complete with aluminium louver shutter double ball bearing, longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. |
| 345 | Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary. |
| 346 | Supply and erection of Recessed Mounted 36 Watt LED 2x2 panel (including constant LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary. |
| 347 | Supply and erection of Slim Recessed mounted, Round downlighter 18 watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with CRCA sheet with control gear (IP 20 protection), THD<10%, CRI minimum 70, Low power LED with wattage Less 1 Watt, Surge Protection 2.5KV and above as per IS/ IEC Standards, efficacy of LED fixture minimum 100 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 348 | Supply and erection of COB Downlights 9/10W LED Recess Mounted with High quality extruded aluminium with efficacy of COB LED fixture and clear difuser more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 349 | Internal Electrical installation |
| 350 | MINIATURE CIRCUIT BREAKERS: |
| 351 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 352 | MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 353 | MCB Double Pole 40amp. (10kA, Curve-C) |
| 354 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- |
| 355 | 6/10amp. One Way Modular Switch (One Module) |
| 356 | 16/20amp. One Way Modular Switch with Indicator (One Module) |
| 357 | 6/10amp. One Way Modular Bell Push (One Module) |
| 358 | 6amp. 2/3 Universal Modular Shuttered Socket (two Module) |
| 359 | Step type Modular Electronic Fan Regulator 100watts (Two Module) |
| 360 | Modular TV Socket (One Module) |
| 361 | Ceiling Rose (Flush Piano type) |
| 362 | Call Bell 220/230 volts AC Ding Dong |
| 363 | Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):- |
| 364 | Powder Coated Concealed Metal Box with Brass Lugs One/Two Module |
| 365 | Powder Coated Concealed Metal Box with Brass Lugs Three Module |
| 366 | Powder Coated Concealed Metal Box with Brass Lugs Six Module |
| 367 | Powder Coated Concealed Metal Box with Brass Lugs Eight Module |
| 368 | Powder Coated Concealed Metal Box with Brass Lugs Twelve Module |
| 369 | MCCB's (MOULDED CASE CIRCUIT BREAKER): |
| 370 | Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- |
| 371 | MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting |
| 372 | Supply and installation of minimum 8 Feet Chandelier Crisp Premium K9 Crystal Aluminum Frame with gold finish, E14 LED bulb Input Voltage 220–240V AC, 50 Hz, Ceiling suspended (with adjustable cables/rods), Wide illumination (diffused through crystal), Complete with all accessories including suspension kit, canopy and fixing hardware, with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 373 | Supply and installation of LED Strip Light 24V warm white 2700-4000K with Input Voltage 220–240V AC, 50 Hz Output: 24V DC constant voltage with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 374 | Supply and installation of 24V LED Strip Light Driver Input Voltage 220–240V AC, 50 Hz, Output Current upto 5A with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 375 | Supply and installation of 24V LED Strip Light Driver Input Voltage 220–240V AC, 50 Hz, Output Current upto 10A with 2 year warranty. Complete in all respects as approved and desired by the Engineer/Architect in charge at site. |
| 376 | Supply and erection of Slim Recessed mounted, Round downlighter 18 watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with CRCA sheet with control gear (IP 20 protection), THD<10%, CRI minimum 70, Low power LED with wattage Less 1 Watt, Surge Protection 2.5KV and above as per IS/ IEC Standards, efficacy of LED fixture minimum 100 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 377 | Supply and erection of Heavy duty Exhust Fans 300mm sweep 900RPM complete with aluminium louver shutter double ball bearing, longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. |
| 378 | Less the cost of dismantle |
| 379 | Public Health Services |
| 380 | Sub Work-1 |
| 381 | Sub Head-1 Internal Sewerage System |
| 382 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type B |
| 383 | 110mm o/d SWR UPVC pipe lines laid complete |
| 384 | 90mm o/d SWR UPVC pipe lines laid complete |
| 385 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 386 | For 110mm i/d pipes |
| 387 | Door Elbow 90 Degree (All side socketed) |
| 388 | Vent Cowls |
| 389 | Coupler |
| 390 | Single Tee With Door |
| 391 | Single Tee |
| 392 | P Trap/Floor Trap 110mm x 110mm |
| 393 | For 90mm o/d pipes |
| 394 | Door elbow 90 degree (all side socket) |
| 395 | Vent Cowls |
| 396 | Coupler |
| 397 | Single Tee With Door |
| 398 | Single Tee |
| 399 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 400 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge) |
| 401 | 110mm o/d |
| 402 | 90mm o/d |
| 403 | Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. |
| 404 | M.S. Holder bats clamps for 100mmi/d H.C.I. pipes |
| 405 | M.S. Holder bats clamps for 90mm o/d as per table-1 |
| 406 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. |
| 407 | 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mmas per table-1 |
| 408 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weightas per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. |
| 409 | 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal |
| 410 | Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means |
| 411 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 412 | Through wall 11.43 cm thick |
| 413 | Through wall 22.86 cm thick |
| 414 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 150 mm x 150 mm |
| 415 | Sub Head-2 Internal Water Supply System |
| 416 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. |
| 417 | SDR 11 CPVC pipes & fittings 20mm o/d |
| 418 | CPVC SDR 11 Pipe & fitting 25mm o/d |
| 419 | CPVC SDR 11 Pipe & fitting 50mmo/d |
| 420 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm |
| 421 | qty same as CPVC PIPE 20mm o/d to 50 mm |
| 422 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 423 | Through wall 11.43 cm thick |
| 424 | Through wall 22.86 cm thick |
| 425 | Providing, fixing and jointing Upvc Union Couplings with Upvc Pipes complete in all respect. |
| 426 | 25mm i/d CPVC Union |
| 427 | Providing, fixing and jointing CPVC Ball valves screwed with CPVC ball & spindle & Teflon seats, on CPVC Pipe lines including all carriages complete. |
| 428 | 25mm i/d CPVC Ball valves |
| 429 | Providing, fixing and jointing Upvc Tank Nipple with Upvc Pipes complete in all respect. |
| 430 | 25mm i/d CPVC tank nipple |
| 431 | Sub Head - 3 Sanitary Installation |
| 432 | Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 433 | Chinaware Floor Mounted One Piece EWC rim less type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) size 69x36x74 cm with P trap or S trap and seat cover complete in all respect. |
| 434 | Providing and fixing PVC accessory fittings for dual flush Chinaware flushing cistern 10 Litres capacity complete. |
| 435 | Providing and fixing jet spray with 2'-6\\" long PVC pipe.With C.P. Brass nut |
| 436 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 437 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer- in-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. |
| 438 | CP brass Acrylic Shelf size 560mmx130mm |
| 439 | C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm |
| 440 | Providing and fixing divertors of approved make (to the approval of Engineer-in-charge) for bath and shower system complete in all respect. |
| 441 | Single lever concealed divertor of bath and shower system (with body and upper part) |
| 442 | Providing & Fixing in postion CP Brass bath tub spout with wall flange of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 443 | Providing and fixing in position C.P. brass overhead shower round or square 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer- in-charge) complete in all respect. |
| 444 | CP Brass rain Fall Shower without arm 8\\" round |
| 445 | Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 446 | CP Brass rain Fall Shower arm 18\\" length round chrome |
| 447 | Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer- in-charge) complete in all respect. |
| 448 | Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. Vertical type |
| 449 | 25 litre capacity water heater |
| 450 | Providing and Fixing in position Glass shower enclosure L shaped 8mm thick with chrome finish with sliding door and entry from the front of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 451 | 1200x1000 x 1950mm |
| 452 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 453 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 454 | Providing and fixing jet spray with 2'-6\\" long PVC pipe.With PTMT nut |
| 455 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 456 | Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. |
| 457 | Vitreous white Chinaware Partition |
| 458 | Large partition size 75 x 16.5 x36.5 cm |
| 459 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 460 | Size 550 mm x 400 mm x 815mm |
| 461 | Size 560mm x 450mm (Under counter oval) |
| 462 | Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. |
| 463 | Vitreous chinaware standard white pedestal for wash hand basin. |
| 464 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 375 mm with PTMT nut |
| 465 | Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect. |
| 466 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 467 | C.P. brass towel Rails size 15mm dia 610mm long |
| 468 | C.P brass towel ring |
| 469 | C.P. brass towel bracket (610mm long) |
| 470 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 471 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 472 | Size 600mmx450mm |
| 473 | Size 1500mmx600mm |
| 474 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. |
| 475 | C.P. brass Bib cock long nose/ long body foam flow without flange |
| 476 | C.P Brass bib cock foam flow without flange |
| 477 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 478 | C.P.brass 15mm Angle valve without flange |
| 479 | C.P.brass 15mm Concealed stop cock with flange |
| 480 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 481 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long |
| 482 | Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 483 | C.P. brass liquid soap container |
| 484 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.C.P. Brass Accessories: |
| 485 | C.P. brass toilet roll holder with flap |
| 486 | C.P brass towel ring square |
| 487 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple Layer Tanks |
| 488 | Construction of Plateform complete as per specification & as desired by Enginer-in-charge |
| 489 | For 2000 ltr Water Tank |
| 490 | For 1000 ltr Water Tank |
| 491 | For 500 ltr Water Tank |
| 492 | For 200 ltr Water Tank |
| 493 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 494 | Plastic Ball Cock with rod and Plastic Ball |
| 495 | 25mm i/d |
| 496 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. |
| 497 | Double bowl Sink without drain board Overall size 1114 x 490 mm with bowl size 460x385x200mm including waste coupling |
| 498 | Sub Head-4 Flooring and Wall Tile |
| 499 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material |
| 500 | Screed of 50mm thick cement concrete 1:8:16 with stone aggregateto be laid below the topping using mechanical mixer for mixing of material |
| 501 | Extra rate for First Floor |
| 502 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete . |
| 503 | Extra rate for First Floor |
| 504 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 505 | Extra rate for First Floor |
| 506 | Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means |
| 507 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.. |
| 508 | Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 509 | Supplying and filling cinder on roofincluding light ramming |
| 510 | Sub Head -5 Water Cooler |
| 511 | Providing & fixing in position Water Coolerwithout Stablizer of approved make (to theapproval of Engineer-in-charge ) includingcarriage complete in all respect. |
| 512 | Water Cooler Semi Steel Body 80/120 ltr Capacity without StablizerDetail as per Table-3 |
| 513 | Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge) including carriage and fixing in position complete in all respect. |
| 514 | Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:- |
| 515 | Automatic Voltage Stablizer 2 KVAFor Drinking Water Cooler |
| 516 | Sub Work-2 |
| 517 | Sub Head-1 Estate Sewerage |
| 518 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. |
| 519 | 110 mm o/d pipes |
| 520 | 160 mm o/d pipes |
| 521 | Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects. |
| 522 | Depth not exceeding 3 m. BGL.For all classes of soil except rocky |
| 523 | Cement concrete 1:6:12 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 524 | Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work. |
| 525 | Dismantling of metalled road with bituminous course 50 to 75mm thick with base course and making good the same to its original condition complete in all respects |
| 526 | Sub Work-3 |
| 527 | Sub Head-1 Estate Water Supply |
| 528 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. |
| 529 | Earth work upto 1.5 m. Depth All classes of soil except rocky |
| 530 | Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe (TYPE-A) Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects..A) uPVC Pipe 10 Kgf/cm2 |
| 531 | 25mm i/d |
| 532 | Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe (TYPE-A) Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects..B) uPVC Pipe 6 Kgf/cm2 |
| 533 | 50mm i/d |
| 534 | Providing, fixing and jointing Cpvc Union Couplings with Upvc Pipes complete in all respect. |
| 535 | 50mm i/d Union |
| 536 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. |
| 537 | 50mm i/d Brass Ball valves |
| 538 | Providing and installing water pump for pumping water Cap. 2.00 HP alongwith assembly, Electrical control panel including electrical connections complete in all respects. |
| 539 | Dismantling of metalled road with bituminous course 50 to 75mm thick with base course and making good the same to its original condition complete in all respects |
| 540 | Sub Head-2 Submersible Pump |
| 541 | Boring with casing pipe for tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested, equipment as required such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect. |
| 542 | Boring with 150mm id Housing Pipe Upto 150 mtr depth BGL |
| 543 | Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer – in-charge. |
| 544 | 100 mm nominal size dia. |
| 545 | Supplying, assembling, lowering and fixing in vertical position in bore well un-plasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. |
| 546 | 100 mm nominal size dia. |
| 547 | Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. |
| 548 | 100mm internal diameter |
| 549 | Providing & Fixing of Bail Plug |
| 550 | Providing and installing submersible motor 2.00 HP alongwith assembly, Electrical control panel including electrical connections complete in all respects. |
| 551 | Submersible Cable 4.0mm Cable Water proof complete in all respect |
| 552 | Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe (TYPE-A) Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects.(A) uPVC Pipe 10 Kgf/cm2 |
| 553 | 50mm i/d |
| 554 | Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. |
| 555 | Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect. |
| 556 | Supplying at site of gravel of 1/16\\" to 1/8\\" sizes including pouring and packing in the annular space between the pipes assembly and the bore.The gravel should be free from, dust,dirt, or the vegetable manner as per IS 4097/1967 with latest amendments (to be paid as per actual length of pipe) |
| 557 | Supplying and fixing mild steel centering guides made out of 32mm x 6mm thick M.S. bar complete in all respects. |
| 558 | Sub Work-4 |
| 559 | Sub Head-1 Dismantalling |
| 560 | Dismantling of wall tiles at any floor of thebuilding, laid in cement mortar including scrapingof cement plaster and disposal of malba at asuitable place within a distance of 100 Mtrs of thecomplex complete in all respect. |
| 561 | Qty Same as Item 14.127 |
| 562 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 563 | Qty Same as Item 14.122 |
| 564 | Dismantling H.C.I Soil pipes including disposal as desired by the Engineer-in-Charge. |
| 565 | 100mm i/d H.C.I. pipe(Qty same as 110 mm o/d SWR pipe) (As per Site L.S.) |
| 566 | 75mm i/d H.C.I. pipe e(Qty same as 90 mm o/d SWR pipe) (As per Site L.S.) |
| 567 | Dismantling H.C.I specials includingdismantalling of lead joints including cartage / disposal within 5 Km. |
| 568 | 100mm i/d H.C.I. specials (As per Site L.S.) |
| 569 | 75mm i/d H.C.I. specials (As per Site L.S.) |
| 570 | Dismantling Sanitary fixtures such asEurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 571 | Eurpoean/Indian/Orissa W.C., |
| 572 | PVC / China Ware Cistern |
| 573 | Wash Hand Basin / Urinal Pot |
| 574 | CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 575 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all otheraccessories. |
| 576 | Dismantling concrete Cement Concrete Plain 1:2:4 |
| 577 | Qty Same as per Floor tiles |
| 578 | Sub Work-5 |
| 579 | Sub Head-1 Carriage |
| 580 | Labour for carrying dismantled material |
| 581 | Sub Head-2 Credit of material |
| 582 | Credit of old dismantelled material such as HCI, GI Pipes,Taps, nipples etc. etc. Total in Figures 581.0 14418029.24 14418029.24 INR One Crore Forty Four Lakh Eighteen Thousand &Twenty Nine and Paise Twenty Four Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
