|
| 1 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each, all as specified. |
| 2 | S&F 30 mm thick plain framed panelled door shutters of 2nd class hard wood (Factory made) two panel with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed. |
| 3 | S&F 35 mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secring glass,etc size of members of shuters as specified in SSR Part-I,Section 8, clause 8.24 (a); supply and fitted to chowkhats, all as specified. |
| 4 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheetreinforced with M.S. Square tube, suppling & fixing in opening inclu. taking down frame with shutter n.exc 1.50Sqm each as per specification & drawing complete all as specified and directed. |
| 5 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per pecification & drawing. complete all as specified and directed. |
| 6 | S & F for floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor over all length of cover plate 140mm thick complete all as specified and directed. |
| 7 | S&F butt hinges 100mm, cold rolled medium weight mild steel all as specified. |
| 8 | S&F 150 mm size, extruded aluminium alloy handles, fabricated type, anodised. |
| 9 | S&F 200 mm long aluminium tower bolts (ISI Marked) extruded type all as specified. |
| 10 | S&F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 11 | S&F 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified. |
| 12 | S&F Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples. |
| 13 | Hacking out old brocken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, gazed with putty or fixed with beads. |
| 14 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane all as specified. |
| 15 | Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water and M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement and applying two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface and curing after applying each coat complete all as specified and directed. |
| 16 | Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, and M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick in CM 1:6 complete all as specified and directed. |
| 17 | Dismantling of wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, and M&L Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, all as specified and directed. |
| 18 | Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, and M&L Vitrified Ceramic light shade tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over screed bed 15 mm thick in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 19 | Taking up or down GI pipes 15mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, and S&F GI tube 15mm bore medium grade galvanised ISI marked with all fittings complete on walls complete all as specified and directed. |
| 20 | Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceabl pipe,and S&F GI tube 20mm bore medium grade galvanised with all fittings and fixed to short length complete all as specified and directed. |
| 21 | S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern) including fixing bolts, 'P' and 'S' trap and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed. |
| 22 | S&F in repair vitreous china wash hand basin white of bowl size 550x400mm including waste coupling and waste pipe PVC 32mm dia to be fixed over mild steel bracket complete all as specified and directed. |
| 23 | S&F low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 25 | S&F in repair bib taps, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F in repairs 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F in repair fancy type Pillar tap cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 28 | S&F in repair bib taps, standard of PTMT any colour high pressure screwed for iron pipe of 15mm bore complete all as specified and directed |
| 29 | S&F in repair 15mm PVC ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified. |
| 30 | S&F grating round 125 mm size of PTMT (Minimum weight 40 gms) as in repair, complete all as specified and directed. |
| 31 | S&F in repair centre hole basin / Wall mixture valve, cast copper alloy fancy type 15mm brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe , complete all as specified. |
| 32 | Dismantling water tanks (Capacity of tank exc 250 Ltr but n exc 500 Ltr) and removing from site, S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade complete all as specified. |
| 33 | Dismantling water tanks (Capacity of tank exc 500 Ltr but n exc 1000 Ltr) and removing from site, S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade complete all as specified. |
| 34 | Dismantling of plain or corrugated steel sheeting,any gauge,thickness,including nanital or similar pattern roof covering, M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Sheet colour approved by Engineer-in-Charge complete all as specified and directed. |
| 35 | Dismantling of plain or corrugated steel sheeting,any gauge,thickness,including nanital or similar pattern roof covering, S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | M&L for applying one coat of synthetic enamel paint on old steel surfaces on any description not otherwise described over 10 cm width or girth including prepration of old painted surfaces, all as specified and directed. |
| 37 | Material & labour for one coat of cement base paint including preparation of old surface to match the shade as per colour scheme as approved by Engr-in-Charge. |
| 38 | M&L for one coat of oil bound distemper to old plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 39 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including fillets and S&F in position suspended anodised aluminium false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 605X605 mm fixed in the grid of E-grid suspended ceiling grid system duly suspended by 6 mm dia GI(upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size long and expansion hold fasteners 12.5 mm dia 40 mm long and M&l for exposed metal frame ceiling with 6 mm thick calcium silicate boards of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600X600 mm grid(Except frame work) complete all as directed and as approved by Engr in Charge |
| 40 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including fillets and S&F, PVC Wall lining consisting of 5mm thick wood grin printed PVC sheet as in striups and chanel inclusive of solvent cement and fixing at site on necessary pvc frame incl fillets as per specifications and drawings complete all as directed and as approved by Engr in Charge |
| 41 | S&F in repair snow white one piece EWC Model Name: CASINO 660X350X760 S trap 220mm with soft colse seat cover, including fixing with screw/bolts complete all as spcified. |
| 42 | S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 43 | S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 44 | S&F 5.5 mm thick sheet glass ordinary quality and fixed to shutter exc. 0.50 Sqm in each pane fixed to frame all as specified. |
| 45 | S& F 6mm thick aluminium composite panel for door complete all as spd. |
| 46 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 47 | S&F 4 mm thick sheet glass ordinary quality and fixed to aluminium shutter n exc. 0.50 Sqm in each pane fixed to frame all as specified. |
| 48 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screwsetc. complete all as specified |
| 49 | S&F 5mm thick Figured glass, rubber packing, anodised aluminium snap beading, screws in squares n exc 0.5 sq. m in each pane fixed to frame all as specified. |
| 50 | S&F brass 2 levers Mortice lock,vertical type, size100 mm etc |
| 51 | S&F Door closer cast iron body hydrolically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed |
| 52 | Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, and M & L Chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx30cmx22-25mm thick, over 20mm thick screed bed in CM (1:6) set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors.complete all as specified and directed. |
| 53 | S&F in repair 5mm thick looking mirror of size 0.45Mtr X 0.60 Mtr of selected quality glass mounted on PVC/plastic border fixed on wall with PVC plug and screws etc complete all as spcified directed. |
| 54 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level including stone/tiles any type complete all as specified and directed. |
| 55 | M&L 50mm thick PCC (1:2:4)type B-1 (using 20mm graded coarse aggregate ) laid to an outward slope 1:12 as in plinth protection complete all as specified and directed. |
| 56 | M&L for forming 6/10mm th expansion joint filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound. |
| 57 | Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 13,485.00 during AOCNote:- Tenderers shall not quote for this Schedule Please Enable Macros to View BoQ information |