|
| 1 | Sch 'A' Part-I B/R work:-Dismantling/Demolition of existing roof (Assessable/non assessable)terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified Note : Demolition should be done by chiselling. |
| 2 | M&L for 10mm thick plaster , on fair faces of brick work or concrete surfaces and provn of on roof finished even and smooth with using liquid water proofing compound as per manufacturers instructions Complete all as specified and directed. (Note :- Supply only liquid water proofing compound shall be measured & paid separately). |
| 3 | M&L for PCC 1 : 2 :4 type B-0 (using 12.5mm graded crushed stone aggregate) as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc mixed with approved water proofing compound all as per manufacturer'ss instructions on the roof surface to achieve requisite slope all as specified and directed. (Note : Supply only water proiofing compound shall be measured & paid separately) |
| 4 | Supply only polymer based liquid water proofing compound complete all as specified and directed. |
| 5 | M&L for liquid water proofing treatment to RCC roof slab in following procedure : (a) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (b) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (c) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (d) Applying third and final coat undiluted @ 0.45 ltr/ sqm . (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster) complete all as specified and as directed by Engr-in-Charge |
| 6 | Demolition of brick work built in CM incl. taking out roots vegetation if any at any position and removal to out side MD land |
| 7 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:6) complete all as specified and as directed. |
| 8 | M&L for Half Brick work with burnt clay sub-class 'B' brick having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1:4. |
| 9 | Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc. and removal of debris out side MD land. |
| 10 | M&L for 15mm thick cement plaster in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement . |
| 11 | M&L for Preparation of new plastered or un-plastered surfaces of wall by applying 1.5 mm thick wall care putty on plastered surfaces of wall; internal /external Birla/JK white putty smooth finished ,Make Royal of Asian Paint or Nerolac impressions. |
| 12 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over a coat of alkali resistant primer.etc complete all as specified and directed. |
| 13 | M&L for Preparation of old plastered or un-plastered surfaces of wall by applying 1.5 mm thick wall care putty on plastered surfaces of wall internal /external smooth finished complete all as specified and directed. |
| 14 | M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying one coats of oil bound distemper primer complete all as specified and directed . |
| 15 | M&L for complete removal of existing surfaces on wall and applying two coats of white wash complete all as specified and directed. |
| 16 | M&L for rendering 5 mm thick on fair faces of concrete surface of ceiling in CM 1 : 3 and finishing even and smooth without using extra cement complete all as specified and directed.. |
| 17 | M&L for preparation of new plastered surfaces on ceiling and applying two coats of white wash with complete all as specified and directed. |
| 18 | M&L for complete removal of existing surfaces on ceiling and applying two coats of white wash with complete all as specified and directed. |
| 19 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC @3 % by the weight of cement used and finishing even and smooth without using extra cement complete all as specified and directed.. |
| 20 | M&L for preparation of NEW plastered walls surfaces for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 21 | M&L for complete removal of existing surfaces including washing / rubbing down with water of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 22 | Racking out joints/pointing to randum rubble or poly gonal rubble uncoursed or brought upto courses buil in cement mortar 1:4 complete all as specified and directed. |
| 23 | Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 24 | M&L PCC 1:3:6 type C-2 (Using 40mm graded crusged stone aggregate), 75mm thick as in plinth protection finished even and smooth using extra cement compete all as specified. |
| 25 | M&L for 25mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggragate) as in base of floor compete all as specified. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed. |
| 27 | Dismantling stone slabs or pcc tiles of any description or thickness in steps, landing, flooring and similar work laid, bedded and pointed in cement mortar complete. |
| 28 | M&L for 15 -18mm thick granite stone slab (of any type) machine cut (in one piece) bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigment to match the shade of stone in cooking platforms WHB counter top, vertical supports including laid over 20mm thick C:M 1:6 including grinding and polishing complete all as specified and directed. |
| 29 | M&L for Green Marble Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars,landing window cills, cooking platforms bedded and jointed with gray cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with marble shade and laid over 15mm thick in cement mortar (1:4) complete all as specified and directed. |
| 30 | Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed. |
| 31 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick of size 600mm x 600mm x 7 to 8 thick in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. incl 15 mm thick screed bed in cement mortar 1:6 including finishing even and fair complete all as specified. |
| 32 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick of size 600mm x 600mm x 7 to 8 thick vertical wall skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as rendering cement plaster, 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces to receive tiles complete all as specified and directed. |
| 33 | M&L for Non skid ceramic colored tiles, edge cut 7 to 8mm thick square or rectangular) area of Each tile exceeding 0.11 sqm but not exceeding 0.18mm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile incl 15 mm thick screed bed in cement mortar 1:4 including finishing even and fair complete all as specified. |
| 34 | M&L for Coloured glazed ceramic tiles of size 350x 450 x 7mm thick,on vertical wall surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces inc rendering cement plaster, 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces to receive tiles complete all as specified and directed. |
| 35 | M&L endura paving tiles of technocommercial of size 300x300x10mm thick set and jointed in neat cement slurry and pointed with white cement to match the joint incl 20 mm thick screed bed in cement mortar 1:4 over including finishing even and fair complete all as specified. |
| 36 | M&L for 75 mm thick plain Cement concrete 1:4:8, type B-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed. |
| 37 | Taking down chowkats of frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm but n exc 4 sq. m each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs , walls for taking out hold fast shall be finished idetical to existing finish without any all as specified and directed by Engr- in - charge |
| 38 | Taking down chowkats of frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs , walls for taking out hold fast shall be finished idetical to existing finish without any extra cost of Govt) all as specified and directed by Engr- in - charge |
| 39 | Taking down shutters of any description exc.1 sq.m and n.exc. 2 sq.m each complete all as specified and directed. |
| 40 | Taking down shutters of any description exc.1 sq.m and n.exc. 2 sq.m each and refixing in the same opening complete all as specified and directed. |
| 41 | Dismantling of boarding ,any description and in any position complete all as specified and directed |
| 42 | Supply, fabricate and fixing with WPC board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18mm thick heavy density, interior grade cutting , fabricating and suitable fixing for kitchen cabinets and shelves of any size drawers openable leaf Kitchen cabinet, cupboard, partition & almirahs complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as specified and directed as under :- (a) Stainless steel Handle fancy type 100mm size.(b) Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation. (j) Magnet of suitable size fixed for cabin leafs, drawers Make-Syntex Plasto board and equivalent approved by Engr in charge. Note- The rate includes WPC board and all connecting items mentioned above and The design and pattern should be approved by Engr In Charge. |
| 43 | S&F continous (piano) hinges 40 mm, mild steel, bright finish or electro-galvanised complete all as specified and directed. |
| 44 | S&F 150mm size hasp & staple, aluminium anodised, safety type, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 45 | S&F Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed. |
| 46 | S&F Pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed. |
| 47 | S&F Factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 48 | S&F Factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, 2nd class HW rail and style complete all as specified and directed. |
| 49 | S&F 35 mm thick, 2nd class hard wood factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 50 | S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured glass 3mm thick and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed |
| 51 | S&F Factory made solid PVC door heat moulded frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as specified and directed. |
| 52 | S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed. |
| 53 | All as per srl item No.52 here-in-before but wire gauzed ie.panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly.The rate included for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed. |
| 54 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of exturded sections or cast aluminium alloy all as specified and directed |
| 55 | S&F 150 mm long aluminium bow handles cast type anodised. |
| 56 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section. |
| 57 | S&F butt hinges med weight cold rolled MS, size 100 mm. |
| 58 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed |
| 59 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 60 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel pain complete all as specified. |
| 61 | M&L Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealedwater tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed |
| 62 | Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore15mm complete all as specified. - |
| 63 | S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 15mm complete all as specified. |
| 64 | Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore20 mm complete all as specified. - |
| 65 | S&F Steel water tubing medium grade galvanised with all fittings including short length , fixed to walls and ceiling and laid in floor complete with all fittings (such as bends, elbows, Tee , short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 20mm complete all as specified. |
| 66 | Demolition carefully RCC work as in, Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended worketc by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of debris out side the MOD land. complete all as specified and directed. |
| 67 | M&L for reinforced cement concrete 1 : 2 : 4 type B-0 (using 12.5 mm graded crushed stone aggregate) for Chajja beams, cantilevers etc complete all as specified and directed. |
| 68 | M&L for Use and waste of Formwork to soffits of suspended slabs such as roof slabs,chajja, water tank staging floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)for flat and rough surfaces complete all as specified and directed. |
| 69 | M&L for TMT bars 10mm dia and over cut to length, bent to shape reqd, inculding cranking,bending spirally for hooping for Columns, hooking ends and binding with and incl MS wire(annealed) not less than .90mm dia complete all as specified and directed. |
| 70 | S&F rotational moulded polythylence water storage tanks 500 Ltr cylindrical vertaical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 ltrs including disconnecting the unserviceable existing rcc/pvc tanks complete screwed for iron pipe or brass ferrule directed |
| 71 | S&F in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete 25mm dia complete all as specified and directed. |
| 72 | S&F Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed |
| 73 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete, including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 74 | S&F in repair vitreous China squatting pan, 'orrisa' pattern wc of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe but including 'P' or 'S' trap and provision of lime concrete bedding in repairs. Note:- flushing cistern and flush pipe will be measured and paid under supply only rate. |
| 75 | Supply only PVC connector 15mm size with PTMT nuts of length 450mm |
| 76 | S&F in repair PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed. |
| 77 | S&F in repair wash basin, Vitreous China white (Flat back) 630 x 450mm including fixing granit top with ceramic under counter basin pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar tap and waste pipe complete all as specified and directed. |
| 78 | S&F in repair 15mm bore dia brass CP mixcher for mixing hot and cold water screwed down for iron pipe and fixed for WHB bath complete all as specified and directied |
| 79 | S&F in repair Angular Stop Cock with Wall Flange 15mm bore dia, cast copper alloy fancy type jaqwar/Prayag/Player |
| 80 | S&F in repair, water jet chromium plated for vitreous china pedestal pattern water closet of approved make all as specified and directed. |
| 81 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 82 | S&F in repair brass chromium plated towel rail 20mm dia, \\"D\\" type, 600mm long between flanges. |
| 83 | S&F in repair stainless steel soap dishes approximate size 160mm x 160mm x90mm as complete as specified as directed by Engineer-in-Charge. |
| 84 | S&F in repair Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs complete all as specified and directed.. |
| 85 | S&F in repair Brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairs complete all as specified and directed. |
| 86 | S&F in repair stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed. |
| 87 | S&F in repair 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 PVC bends including all necessaryfixed complete to walls, ceilings or in floors etc. |
| 88 | S&F in repair bib tap brass 15mm bore dia chromium plated long shank fancy type 2-way Bib Cock with Wall Flange screwed for iron pipes complete in repairs complete all as specified and directed.jaqwar/Prayag/Player |
| 89 | S&F in repairs brass chromium plated bathroom wall (wall mounted model) mixture with telephonic shower arrangement with swivel wall hook with and including old Victorian design telephone shower with 12mm dia 1.5m long flexible tube and swivel hook etc. make- jaqwar/Prayag/Player complete all as specified and directed. |
| 90 | S&F in repair 25mm dia, fancy type decorative,ss curtain rod including brackets and nobs each road 2 nos complete all as specified and directed. |
| 91 | S&F in repair 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 92 | Taking down AC / PVC rain water pipe any size or pattern incl all fittings heads, shoes, bends. Swan necks, etc including cleaning for refixing or removing to store. |
| 93 | M&L for 110 mm dia PVC (SWR) pipe single socketed (ISI marked) fixed fixed to wall with mild steel clamps complete all as specified and directed. |
| 94 | M&L for PVC (SWR) 110mm bends any radiusequal complete all as specified and directed. |
| 95 | M&L for 75 mm dia PVC (SWR) pipe single socketed (ISI marked) fixed fixed to wall with mild steel clamps complete all as specified and directed. |
| 96 | M&L for PVC (SWR) 75 mm bends complete all as specified and directed. |
| 97 | M&L for 100 mm ,PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 98 | M&L for 100 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 99 | S&F in repair stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or labouratory with plugs, washers, and wastes. including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste, pipe complete all as specified and directed. Make : Nirali, Bule star ISI marked. |
| 100 | S&F in repair 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for basin, sink, bath complete all as specified and directed. |
| 101 | M&L for providing stages wise waterproofing treatment to sunken portion of toilets as under. Stage 1: Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debries outside MD land etc complete all as specified and directed.Stage 2: Providing 15 mm thick plaster in CM 1:3 mixed with integral water proofing chemical of STP Ltd in the proportion /quantity all as per manufactures instructions.Stage 3 : Primer - Mix Tarfelt LM with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces Stage 4 : Application of 1 st coat of Tarfelt LM of STP Ltd without dilution with water@1kg/sqm by brush all as per manufactures instructions.Stage 5: Laying 50 GSM fyber glass cloth over the 1st coat while the coated surface is still tackyStage 6: After 6 to 7 hours interval apply second coat i.e final coat of Tarfelt LM without dilution with water of STP Ltd by brush as per manufactures instructions.@1kg /SqmStage 7: Providing 10mm thick protective plaster in CM 1:3 mixed with STP NO -1 @ 250ml/50kg cement all as manufactures instructions. |
| 102 | M&L for cement concrete Type E-2, 1:5:10 using 40 mm graded crushed stone aggregate as in lean concrete complete all as specified and directed |
| 103 | Sch 'A' Part-I E/M Portion:-Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators and sockets by unscrewing carefully from boards etc and making good disturbed surfaces of walls, as per existing finishes complete all as spd and directed. |
| 104 | M&L for modular point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable with and including PVC rigid concealed conduit ISI marked heavy duty suitable size with all accessories including modular matallic flush box of suitable way with modular cover plate for modular switches and sockets , including green 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 105 | All as per Srl item No. 104 here-in-before but modular call bell point complete all as specified and directed. |
| 106 | All as per Srl item No. 104 here-in-before but modular 3 pin 5 Amps socket outlet on the same board with other switch complete all as specified and directed. |
| 107 | All as per Srl item No. 104 here-in-before but modular 3 pin 5 Amps socket outlet on the independent board with other switch complete all as specified and directed. |
| 108 | All as per Srl item No. 104 here-in-before but modular 15/16 Amps socket outlet on the independent board with 2.5 Sqmm copper conductor FRLS-H cable and 2.5 Sqmm PVC insulated unsheathed copper conductor cable FRLS-H (green colour) as earth lead complete all as specified and directed. |
| 109 | M&L for modular point wiring for geyser point with 4 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable with and including PVC rigid concealed conduit ISI marked heavy duty suitable size with all accessories including modular matallic flush box of suitable way with modular cover plate for modular switches and sockets , including green 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 110 | S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed. |
| 111 | S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed. |
| 112 | S&F Modular switch 1 way 6 A, 1 module complete all as specified and directed. |
| 113 | S&F Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 114 | S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 115 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 116 | S&F of Modular Fan step regulator 120W-2 module , complete all as specified and directed. |
| 117 | S&F Modular Bell push, 6 amp 1-module complete all as specified and directed by Engr-in-charge.. |
| 118 | S&F of Bell Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge. |
| 119 | S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including inbuilt ind driver complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed. |
| 120 | S&F LED smart Lamp, B22 type ,9 watt,complete all as specified and directed. |
| 121 | S&F sleek LED Batten light fitting, 1x20 W including LED tube 4 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed. |
| 122 | S&F energy saving , surface mounted, wall light LED luminaire 9 watt with PDC aluminium housing and polycorbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible suitable size copper conductor cable complete all as specified and directed by Engr-in-Charge. |
| 123 | S&F energy saving , surface mounted, bulk head luminaire 10 watt with PDC aluminium housing and polycorbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible suitable size copper conductor cable complete all as specified and directed by Engr-in-Charge. |
| 124 | M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and S&F propeller PVC type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable suitable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. |
| 125 | M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and S&F MS ventilating fans Single phase, 230 volts 300 mm or 12” H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable suitable size from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. |
| 126 | Supply, fixing & testing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connecting with flexible copper conductor of suitable size, 3 core and including writing of MES No with black paint complete all as specified and as directed. |
| 127 | S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS-H flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed. |
| 128 | S&F in repair sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 129 | S&F in repair MCB SP 240 volts any rating from 6 to 40 amps, 'B' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 130 | S&F in repair MCB SPN 240 volts of rating from 6 to 40 amps, 'B' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 131 | S&F in replacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed . |
| 132 | S & F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 63 AMPS AC 415 VOLTS 16 KA=01 NO as incoming . ( (i) MCCB, MCB and DB should be of same make. (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. |
| 133 | Taking down and refixing of single phase/three phase electric energy meter and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 4 Sqm from main connection to DB complete all as specified and directed. |
| 134 | S&F in repair bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length not less than 0.9 mtr fixing with clamp etc and making connections using suitable size copper cable from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. |
| 135 | Supply, laying and testing in replacement LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 25 sq. mm 4 core complete all as specified |
| 136 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed. |
| 137 | Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified. |
| 138 | Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 139 | M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified (Note:-Punned thickness shall be measured and paid) |
| 140 | M&L for brick covering equal to length of bricks as mechanical protection to cable with well burnet sub class ‘B’ bricks laid as directed by the Engr-in-Charge. |
| 141 | S&F GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall/Pole including fittings /clamp complete all as specified and directed. |
| 142 | Supply and installation of the electric water storage heater of ABS body type, 25 ltr capacity with rated power 2KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangements and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 143 | Supply and installation of the electric water storage heater of ABS body type, 25 ltr capacity with rated power 2KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangements and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and as directed. Please Enable Macros to View BoQ information |
