|
| 1 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified & directed by Engineer-in-charge. |
| 2 | S & F Spray duco painted Pressed steel frames made of MS sheet of 1.20mm thickness of size 105 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified & directed by Engineer-in-charge.Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items. |
| 3 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified & directed by Engineer-in-charge. |
| 4 | S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified & directed by Engineer-in-charge. |
| 5 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf |
| 6 | Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified & directed by Engineer-in-charge. |
| 7 | S & F Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters and sunmica sheet on both sides as per direction of Engr-In-Charge. Design shall be get approved from Engr-In-Charge complete all as specified and including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 4 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf |
| 8 | S&F in repairs Galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete all as specified. |
| 9 | Taking down aluminium door/ windows incl frames and complete fittings of area exc 1.00 sqm but n. exc 4 sqm complete all as specified & directed by Engineer-in-charge. |
| 10 | S&F Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.20mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick tinted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and incl mortice lock with duplicate keys etc complete all as specified and directed including supply and fixing the following items:(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 11 | Providing and fixing powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm, with and including 4mm thick tinted sheet glass selected quality fixed in 2 shutters and stainless steel wire gauge 0.36mm nominal dia of wire and average width of aperture 1.40mm in one shutter and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size and also including powder coated 150mm handle with built in locking system for each leaf complete all as specified & directed by Engineer-in-charge. |
| 12 | Providing and fixing factory made aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60 x 44.45 x 1.29 mm and shutters made of 63.5 x 31.75 x 1.29 mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36 mm dia and 1.40 mm aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 2 nos per leaf(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 13 | S&F Powder coated 50 microns extruded aluminium frame for fixed type partition (Standard two panel pattern) made out of powder coated aluminium section of size 63.5 x 38.10 x 1.5mm, comprising of 5mm thick tinted glass inserted in and including necesary jointing cleats, rubber packing, anodised aluminium snap beading complete fixed to floor and wall by means of cadium plated steel screws complete incl taking down of existing partition with all fittings and fixtures complete all as specified & directed by Engineer-in-charge. |
| 14 | S & F in repairs door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed by Engineer-in-charge. |
| 15 | S & F in repair 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work complete all as specified & directed by Engineer-in-charge. |
| 16 | S & F in repairs 75 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified & directed by Engineer-in-charge. |
| 17 | Supply & fixing in repairs rubber based door seal fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width min 50mm & length as required at site complete all as specified & directed by Engineer-in-charge. |
| 18 | S&F in repairs Stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified & directed by Engineer-in-charge.Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 19 | S & F in repair of 3mm thick Fibre-reinforced plastic sheet of transparent colour of any of size including necessary screw and other accessories all as specified and directed by Engr-in-Charge including hacking out the same from window or door frame. Note: Cost of Scaffolding for change of sheet upto four story building also include in the rate. |
| 20 | S & F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern), incl providing waste pipe, coupling, and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass ecrews/ fasteners/ rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified & directed by Engineer-in-charge. |
| 21 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) complete all as specified & directed by Engineer-in-charge. |
| 22 | S & F in repair 6mm thick of size 600x450mm looking mirror fixed to wall with stainless steel plugs/ connecter/ spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position complete all as specified & directed by Engineer-in-charge. |
| 23 | S & F in repair Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed by Engineer-in-charge. |
| 24 | S & F in repairs mortice lock brass 4 levers vertical type with handle, size 100mm complete all as specified & directed by Engineer-in-charge. |
| 25 | Repair of unserviceable rolling shutter, properly opening/ closing greasing without dismantling of shutters in existing position complete all as specified & directed by Engineer-in-charge. |
| 26 | Dismantling wrought iron or mild steel work of any description not othervise provided complete all as specified & directed by Engineer-in-charge. |
| 27 | S&F MS hollow rectangular/ square/ circular tubes/ pipes of YST 310 Grade as in frame work for roofs/ rafters/purlins /chajjas/ trusses/ columns/ struts etc and like similar items etc. complete all as specified & directed by Engineer-in-charge. |
| 28 | M&L for mild steel framed work as in doors or gates of angle Gde-Fe-290( Gde-E-165) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed by Engineer-in-charge. |
| 29 | M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified & directed by Engineer-in-charge. |
| 30 | Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified & directed by Engineer in charge. |
| 31 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engineer-in-charge. |
| 32 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete all as specified & directed by Engineer-in-charge. |
| 33 | Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4-6mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \\"T\\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-charge. |
| 34 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh and including anodised aluminium snap grid frame complete all as specified & directed by Engineer-in-charge.Note :-Fillets, G.I. wire mesh paid separately. |
| 35 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified & directed by Engineer-in-charge. |
| 36 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & directed by Engineer-in-charge. |
| 37 | M& L for two coat of Oil bound distemper on ceiling surface including prepration of new surface complete all as specified & directed by Engineer-in-charge. |
| 38 | S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as recommended by manufacturer all as specified colour/pattern as approved by Accepting Officer complete all as specified & directed by Engineer-in-charge. |
| 39 | S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 complete all as specified & directed by Engineer-in-charge. |
| 40 | S&F in repair European type water closet including CI P/S trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm P/S trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect complete all as specified & directed by Engineer-in-charge. |
| 41 | S & F in repair Vitreous china premium/1st quality wash down water closet floor mounting EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect complete all as specified & directed by Engineer-in-charge. |
| 42 | S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified & directed by Engineer-in-charge. |
| 43 | S & F in repair Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect complete all as specified & directed by Engineer-in-charge. |
| 44 | S&F in repair wash basins vitreous china, white /coloured flat back size 550 x400mm fixed including bracket complete all as specified & directed by Engineer-in-charge. |
| 45 | S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete all as specified & directed by Engineer-in-charge. |
| 46 | S & F in repairs brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified & directed by Engineer-in-charge. |
| 47 | Supply & Fixing in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe complete all as specified & directed by Engineer-in-charge. |
| 48 | S & F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified & directed by Engineer-in-charge. |
| 49 | S & F in repair Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect complete all as specified & directed by Engineer-in-charge. |
| 50 | S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified & directed by Engineer-in-charge. |
| 51 | Supply & Fixing in repair Brass CP wall Mixer 3 in 1 System with provision for overhead and hand shower suitable 15mm bore of pipe complete all as specified & directed by Engineer-in-charge. |
| 52 | Supply & Fixing 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections complete all as specified & directed by Engineer-in-charge. |
| 53 | Supply & Fixing 20mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections complete all as specified & directed by Engineer-in-charge. |
| 54 | Supply & Fixing in repair Corner glass shelf size 300 mm radius with and including bracket and glass complete set etc complete all as specified & directed by Engineer-in-charge. |
| 55 | Supply & Fixing in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc complete all as specified & directed by Engineer-in-charge. |
| 56 | Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc complete all as specified & directed by Engineer-in-charge. |
| 57 | Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type complete all as specified & directed by Engineer-in-charge. |
| 58 | S & F in repair Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair in all respect complete all as specified & directed by Engineer-in-charge. |
| 59 | S&F in repairs 15mm dia two way angle cock of brass, chromium plated fancy type glossy finish fixed in repairs complete complete all as specified & directed by Engineer-in-charge. |
| 60 | S&F in repairs Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified & directed by Engineer-in-charge. |
| 61 | Supply & fixed in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm complete all as specified & directed by Engineer-in-charge. |
| 62 | Supply & fixed in repairs stainless steel sink, made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed by Engineer-in-charge. |
| 63 | S & F in repair CP Cockroch trap(127x127mm) with waste hole as per cat No FT-25 make Prayag including taking out old one and setting new one in CM 1:3 complete all as specified & directed by Engineer-in-charge. |
| 64 | Supply and fixing in repairs PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level complete all as specified & directed by Engineer-in-charge. |
| 65 | S & F PVC mirror cabinet of size 300x450mm of selected quality glass fixed in PVC cabinet complete all as specified & directed by Engineer-in-charge. |
| 66 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified & directed by Engineer-in-charge. |
| 67 | S & F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed by Engineer-in-charge. |
| 68 | S & F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed by Engineer-in-charge. |
| 69 | S & F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engineer-in-charge. |
| 70 | S & F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engineer-in-charge. |
| 71 | S & F PVC (SWR) 75mm bends any radius complete all as specified & directed by Engineer-in-charge. |
| 72 | S & F PVC (SWR) 110mm bends any radius complete all as specified & directed by Engineer-in-charge. |
| 73 | S & F PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge. |
| 74 | S & F PVC (SWR) branch piece 75mm, single (single Y) equal or unequal with access door complete all as specified & directed by Engineer-in-charge. |
| 75 | S & F PVC (SWR) branch piece 110mm, single (single Y) equal or unequal with access door complete all as specified & directed by Engineer-in-charge. |
| 76 | S & F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 75mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified & directed by Engineer-in-charge. |
| 77 | S & F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 110mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified & directed by Engineer-in-charge. |
| 78 | S & F PVC (SWR) vent cowl 75 mm dia complete all as specified & directed by Engineer-in-charge. |
| 79 | S & F PVC (SWR) vent cowl 110 mm dia complete all as specified & directed by Engineer-in-charge. |
| 80 | S & F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified & directed by Engineer-in-charge. |
| 81 | S & F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified & directed by Engineer-in-charge. |
| 82 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified & directed by Engineer-in-charge. |
| 83 | Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified & directed by Engineer-in-charge. |
| 84 | M & L for 75 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring / hard standing complete all as specified & directed by Engineer-in-charge. |
| 85 | M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone, copings, bed plates complete all as specified and directed by Enginneer in charge |
| 86 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/ highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified & directed by Engineer-in-charge. |
| 87 | M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified & directed by Engineer-in-charge.Note : Work will be in patches or in bulk |
| 88 | M & L for Glazed ceramic glossy finish tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 89 | All as per item No. 88 above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and directed. |
| 90 | M&L for glazed vitrified tiles 8-10mm thick (square / rectangular) polished, area of each tiles exc 0.36 Sqm not exceeding 0.72 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified & directed by Engineer-in-charge. |
| 91 | M&L for glazed vitrified tiles 8-10mm thick (square / rectangular) polished, area of each tiles exc 0.36 Sqm not exceeding 0.72 Sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified & directed by Engineer-in-charge. |
| 92 | M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement complete all as specified & directed by Engineer-in-charge. |
| 93 | M & L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick,rubber moulded set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified & directed by Engineer-in-charge. |
| 94 | Material & Labour for ceramic out door tiles 400mmx400mmx12mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 15 mm thick Cement Mortar 1:6 complete all as specified & directed by Engineer-in-charge.Note : Work will be in patches or in bulk |
| 95 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified & directed by Engineer-in-charge. Note : Work will be in patches or in bulk |
| 96 | M & L for Granite of black (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 16-18 mm thick, set and jointed in cement slurry over & including screed or 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified & directed by Engineer-in-charge.Note : Single piece should be used in steps/cills/jambs/shelves. |
| 97 | M & L for Jaisalmer stone for wall cladding (of any type) 35-55 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified & directed by Engineer-in-charge. |
| 98 | M & L for Machine cut kota stone slab flooring 18 mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified & directed by Engineer-in-charge.Note : Work will be in patches or in bulk |
| 99 | M & L for Machine cut kota stone slab 18mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed by Engineer-in-charge. |
| 100 | M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified & directed by Engineer-in-charge. |
| 101 | Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engineer-in-charge. |
| 102 | M & L for Providing precast cement concrete type B-1 (1:2:4) with 20mm garded stone aggregate in copings.apex stones,columns, posts, boundary pillars, frame of jallies etc and setting in mortar 1:4 complete with joints to match complete all as specified & directed by Engineer-in-charge. |
| 103 | Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified & directed by Engineer-in-charge. |
| 104 | Material & Labour for 35mm thick precast cement concrete louvres and jallies type C-0 (1:3:6) using 12.5mm graded stone aggregate (measured solid), in cluding all mouldings and frame set in cement mortar 1:4 complete all as specified & directed by Engineer-in-charge. |
| 105 | M& L providing Stone jalies Jaisalmer type 48-50MM thick and 60 cm high fixed in line including stone pillar having size 100 x 100 MM height 70 CM above runner fixed in cement mortar 1:4 fixed on stone runner beam (stone piller measured with Jali) including filling of joints with pigment of same colour complete all as specified & directed by Engineer-in-charge. |
| 106 | M & L providing bottom runner stone beam (Jaisalmer type) fixed in line having size 100 x 200 MM fixed in cement mortar 1:4 and making ready for fixing of jaisalmer stone jalies and pillar complete all as specified & directed by Engineer-in-charge. |
| 107 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified & directed by Engineer-in-charge. |
| 108 | M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge. |
| 109 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses complete all as specified & directed by Engineer-in-charge. |
| 110 | M & L for precast cement concrete solid block masonry exc 10cm in width and setting in CM 1:6 type C1, 1:3:6 complete all as specified & directed by Engineer-in-charge. |
| 111 | M & L for AAC (Autoclaved Aerated Concrete) Blocks of size 600MM X 200MM X 200MM, light weight , factory made joint with 3-5 MM thick block jointing mortar/ polymer modified cementitious adhesive for thin bed application (3-5mm thick) complete all as specified & directed by Engineer-in-charge. |
| 112 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified & directed by Engineer-in-charge. |
| 113 | M&L for rendering 15 mm thick readymade plaster on inner/outer walls with approved make by adding 17-19% of potable water by weight of material. For thickness above 15 mm it is recommended to be applied in multiple layers. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 Days- 10-12 Mpa/ Bulk density- 1500-1600 Kg/m3 complete all as specified & directed by Engineer-in-charge.Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height. |
| 114 | M & L for Applying 1mm thick wall care putty on wall for desired smoothness and levelling of surfaces in two or more layers) for receiving painting complete all as specified & directed by Engineer-in-charge. |
| 115 | M&L for preparation of newly plastered surfaces and applying Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified & directed by Engineer-in-charge. |
| 116 | M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified & directed by Engineer-in-charge. |
| 117 | M&L for rendering 10-15 mm thick Levelmaxx plus plaster on inner/outer walls/ceiling with approved make by adding 22-25% of potable water by weight of material. For thickness above 15 mm it is recommended to be applied in multiple layers. plaster shall complies with Compressive strength @ 28 Days- 10-12 Mpa/ Bulk density150Kg/Ltr complete all as specified & directed by Engineer-in-charge. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height. |
| 118 | M& L for applying three coats of white wash on ceiling surface including prepration of new surface complete all as specified & directed by Engineer-in-charge. |
| 119 | M & L for plain sheet glass plain 3mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane including hacking out of old/broken glass complete all as specified & directed by Engineer-in-charge. |
| 120 | S & F in repair Vitreous china premium/1st quality wash basin, white, square or rectangular of size not less than 550x400x140 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed by Engineer-in-charge.Note : The items for counter will be measured and paid separately. |
| 121 | M&L for taking down shutters of any description exc 1.00 sqm but n. exc 2.00 sqm of each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified & directed by Engineer-in-charge. |
| 122 | M&L for taking down shutters of any description exc 2.00 sqm of each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified & directed by Engineer-in-charge. |
| 123 | S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete all as specified & directed by Engineer-in-charge. |
| 124 | All as per item No. 123 here in before but in repairs |
| 125 | S&F MS butt hinges, medium weigh, cold rolled, ISI marked of size 125mm, complete all as specified & directed by Engineer-in-charge. |
| 126 | All as per item No. 125 here in before but in repairs incl necessary welding work etc complete all as specified and directed. |
| 127 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified & directed by Engineer-in-charge. |
| 128 | All as per item No.127 here in before but in repairs. |
| 129 | S&F 150mm long extrueded aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engineer-in-charge. |
| 130 | All as per item No.129 here in before but in repairs. |
| 131 | M&L for taking down carefully existing aluminium/ copper point wiring (light, fan, socket or power) complete fittings fixture such as switches Ceiling roses, pendents,regulators, sockets etc to be measured separately)unscrewing from Board/outlet boxes, fittings & fixtures such as switches, sockets, ceiling rose lamp holder tube/ceiling fitting, bulk head fittings, tube lights & regulator etc and making good disturbed surfaces of walls, floors etc. complete all as specified & directed by Engineer-in-charge. |
| 132 | M&L for taking down carefully existing old DBs and making good disturbed surfaces of walls to match the existing surfaces complete all as specified & directed by Engineer-in-charge. |
| 133 | M&L for taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified & directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 134 | M&L for taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified & directed by Engineer-in-charge. Please Enable Macros to View BoQ information |