|
| 1 | Civil work |
| 2 | Earth work excavation by mechaniclal means (Hydraulic Excavator) including disposal of excavated earth upto 50 m lead (All kinds of soil). |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. ( All kinds of soil :) |
| 4 | Extra lead beyonf 50 m upto 1 Km |
| 5 | Extra for every additional lift of 1.5 m or part thereof in excavation/ banking excavated or stacked material( All kinds of soil) |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating on deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 7 | P/L of stone soling of required sizes , compacting , watering and ramming, complete including all carriages. |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering including all carriages. |
| 9 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 10 | 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). |
| 11 | 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). |
| 12 | 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size). |
| 13 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size).including all carriage. |
| 14 | (upto plinth level) |
| 15 | (Above plinth level) |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 17 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 18 | suspended floors, roofs, landing balconies, shelves, lentils ,beams, pillars stair etc |
| 19 | Foundation,footings,basis of columns etc. |
| 20 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-450 or more. |
| 21 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : |
| 22 | Cement mortar 1:6 ( 1 cement : 6 coarse sand)incl cost and carriage of materials involved complete. |
| 23 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 24 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : |
| 25 | Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 26 | Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 27 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 28 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:3 (1 cement : 3 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (18mm thick) (Granite of any colour or shade as approved by Engineer-in-charge). |
| 29 | Area of Slab upto 0.5 sqm. |
| 30 | Area of Slab over 0.5 sqm. |
| 31 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): |
| 32 | (1st class Kail wood) |
| 33 | Imported wood (KD) |
| 34 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (35mm) (With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws). |
| 35 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws size) 35 mm thick |
| 36 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge (35 mm thk). |
| 37 | First class kail wood. |
| 38 | Imported wood (KD) |
| 39 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5 mm to 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.35 mm |
| 40 | First class kail wood. |
| 41 | Imported wood (KD) |
| 42 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).35 mm |
| 43 | First class kail wood. |
| 44 | Imported wood (KD) |
| 45 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone |
| 46 | Providing wood work in frames of false ceiling. partitionong etc. sawn and fixed in position |
| 47 | Imported wood (KD) |
| 48 | P/ F ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 49 | (a)125x75x4 mm |
| 50 | (b)125x63x4 mm |
| 51 | ©100x75x4 mm |
| 52 | (d) 100x63x4 mm |
| 53 | (e)75x63x4 mm |
| 54 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 55 | (a) 300x10 mm |
| 56 | (b)250x10 mm |
| 57 | ©200x10 mm |
| 58 | (d)150x10 mm |
| 59 | (e)100x10 mm |
| 60 | P/F of ISI marked M.S pressed butt Hinges |
| 61 | 125*65*2.12 mm |
| 62 | 100*58*1.90 mm |
| 63 | 75*60.*3.10 mm |
| 64 | (P/F of M.S Hinges 125mm welded heavy) |
| 65 | (P/F of M.S Hinges for gates) |
| 66 | 100mm |
| 67 | 150mm |
| 68 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 69 | (a) 125 mm |
| 70 | (b) 100 mm |
| 71 | (d) 200 mm |
| 72 | (e)150 mm |
| 73 | P/F of ornamental Handle of approved quality: |
| 74 | 75 mm |
| 75 | 100 mm |
| 76 | 150 mm |
| 77 | P/F of Aldrop of approved quality |
| 78 | 1'0'' |
| 79 | P/F Powder coated Aluminum handles of approvedquality |
| 80 | 75 mm |
| 81 | 100 mm |
| 82 | 150 mm |
| 83 | P/F of Piano Hinges including cost of screws complete. |
| 84 | P/F of stainless steel telescopic drawer channels (450 mm) |
| 85 | P/F of stainless steel telescopic drawer channels (300 mm) |
| 86 | P/F of Hydraulic door spring including all costs. |
| 87 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : |
| 88 | Providing and fixing wooden moulded cornice beading triangular shape to the junction/corner/edges of paneling etc. with iron nails screws, plugs and priming coat on unexposed surface etc. complete. (First class kail wood). |
| 89 | 50*50 |
| 90 | 40*40 |
| 91 | P/f of ornamental wooden cornice imported (32*32) |
| 92 | P/f of pvc cornice as per the directions of EIC complete. |
| 93 | 50*50 |
| 94 | 40*40 |
| 95 | Providing and fixing deoder wood lipping/ moulded beading of size 35x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the pre laminated particle board as per directions of the engineer-in-charge. |
| 96 | P/F 40mm x 6 mm ply lipping as per the directions of EIC. |
| 97 | Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminum doors of approved quality with necessary screws etc. complete as per direction of Engineer-in-charge. |
| 98 | Providingand fixing magnetic catcher of approved quality in cupboard/ wardrobe shutters including fixing with necessary screws etc. complete. (Godrej/link) |
| 99 | Structural steel work welded in built up sections, gratings, guard bar,stair case,gates, ladder, railing, brackets, and similar work including tubular works. Including cutting, hoisting, fixing in position welded and applying a priming coat of approved steel primer all complete. |
| 100 | Structural steel work welded in built up sections, trusses. Framed work. Including cutting, hoisting, fixing in position welded and applying a priming coat of approved steel primer all complete.(Welded) |
| 101 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.(complete job) |
| 102 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete.(50 mmthick) |
| 103 | Kota stone slab flooring 25 mm thick over 20mm (average) thick 1:4 cement mortar base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing. |
| 104 | Providing and fixing Ist quality ceramic glazed wall tiles of approved make, in all colours, shades(of 7-8 mm thick of different sizes) as approved by Engineer- in-Charge, in walls, skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 105 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 106 | Providing and laying vitrified floor tiles with water absorption less than 0.08% of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.(10 mm) ( Size of tile 600x600 mm). |
| 107 | Providing and laying Full body vitrified floor tiles with water absorption less than 0.08% of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.(10 mm) ( Size of tile 600x600 mm). |
| 108 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 109 | 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 110 | 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 111 | P/F of color coated of different profile sheets with min. thickness of 0.50 mm |
| 112 | P/F of Ridges or hips, valley of plain GS sheets in ridges/ valleys/ gutters and wherever required including fixing with J/L hooks all complete. (0.5 mm thick) |
| 113 | 45 cm |
| 114 | 60 cm |
| 115 | 90 cm |
| 116 | P/L Cement plaster of mix(1:4): (1 Cement:4 coarse sand) incl cost and carriage of materials involved complete. |
| 117 | 12 mm |
| 118 | 15 mm |
| 119 | Providing and applying putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 120 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 121 | With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 122 | With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work |
| 123 | Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 124 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.(two or more coats on new work) |
| 125 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 126 | Removing white or color wash /distemper/paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 127 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 128 | Varnishing with varnish of approved brand and manufacturer ( one or more coats.). |
| 129 | Applying knifying grey paste of approved quality over wood/cement surface including sand papering complete. |
| 130 | Removing old paint from wooden surface by scrapping/sand papering/using blow lump.etc |
| 131 | Renewing glass panes, with wooden fillets and nails wherever necessary. |
| 132 | Float glass panes of thickness 3.5mm to 4 mm thickness |
| 133 | Float glass panes of thickness 5 mm |
| 134 | Demolishing cement concrete manually/mechanical means including disposal of material within 500 meters lead as per direction of Engineer-incharge:(1:3:6 or richer mix) |
| 135 | Demolishing R.C.C. work manually/mechanical means including stacking of steel bars and disposal of unserviceable material within 500 meters lead as per direction of Engineer-in-charge. |
| 136 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: (In cement mortar). |
| 137 | Dismantling/Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : |
| 138 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
| 139 | (Dismantling tile work in floors, walls and roofs laid in cement mortar including stacking material within 50 meters lead.( For thickness of tiles 10 mm to 25 mm) |
| 140 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead. |
| 141 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 142 | P/F white vitreous china flat back or wall corner type lipped front urinal basin 430*260*350mm and 340*410*265 mm sizes respectively with flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including fittings and brackets cutting and making good the walls and floors and wherever required. (oneurinal basin with 5 litre white P.V.C flushing cistern. |
| 143 | P/f of sanitary fittings of standard quality: |
| 144 | Providing and fixing White vitrous china water closet squating pan (indian type) Orisa patter W.C Pan of size 580 x 440mm with integrated foot rest. |
| 145 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid. |
| 146 | C.P long bend 32 mm dia |
| 147 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 148 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 149 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 150 | P/F of C.P fittings and fixtures (Approved Quality by Engineer Incharge) |
| 151 | bib cock long body |
| 152 | bib cock short body |
| 153 | pillar cock/sink cock |
| 154 | wall mixer two holes |
| 155 | cp arm |
| 156 | wall mixer with showers |
| 157 | Sink mixer(single hole) |
| 158 | Grating 100 mm |
| 159 | CP tube 45-60 cm |
| 160 | Towl Ring 8-9” |
| 161 | Cloth Hanger |
| 162 | soap case |
| 163 | Mixer leg |
| 164 | Towl Rod 60 cm |
| 165 | CP Nipple 15*25 mm |
| 166 | CP Nipple 15*50 mm |
| 167 | angle valve |
| 168 | C.P Cup |
| 169 | Geyser bolt set |
| 170 | Stainless steel sink |
| 171 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 178mm |
| 172 | two in one Bibcock |
| 173 | P/F health faucet with 1 mm C.P chain |
| 174 | P/F of Telephonic shower with chain |
| 175 | P/F of high neck swan type C.P mixers Jacquar / approved one with hot / cold controls. |
| 176 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 177 | PVC connection (24”) |
| 178 | PVC connection(18”) |
| 179 | P/ f spindle heavy duty for mixer and bib cock |
| 180 | P/F urinal C.P spreader heavy quality |
| 181 | P/F of CP waist for steel sinks heavy duty |
| 182 | 50mm dia |
| 183 | 75mm dia |
| 184 | 100mm dia |
| 185 | Providing of CP Knob (Gem/Parko) |
| 186 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 187 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 188 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 189 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 190 | PN-16 pipe , 40mm OD(SDR-7.4) |
| 191 | PN-16 pipe , 50mm OD(SDR-11) |
| 192 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 193 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 194 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 195 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 196 | Providing and fixing PPR Unions |
| 197 | PPR Union 20mm |
| 198 | PPR Union 25mm |
| 199 | PPR Union 32mm |
| 200 | PPR Union 40mm |
| 201 | PPR Union 50mm |
| 202 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls, excavation work and refilling etc .complete. Etc .(internal /external) |
| 203 | (A):(medium Grade ) |
| 204 | ii) 20 mm dia. nominal bore |
| 205 | iii)25 mm dia. nominal bore |
| 206 | iv)32 mm dia. nominal bore |
| 207 | v)40mm dia nominal bore |
| 208 | vi)50 mm dia. nominal bore |
| 209 | (B)Concealed type including cutting chasses and making good the walls |
| 210 | (i) )15 mm dia. nominal bore |
| 211 | (ii)20 mm dia. nominal bore |
| 212 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. |
| 213 | (a)15 mm nominal bore |
| 214 | (b) 20 mm nominal bore |
| 215 | (c)25 mm nominal bore |
| 216 | (d)32 mm nominal bore |
| 217 | (e)40 mm nominal bore |
| 218 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. |
| 219 | (a) 100 mm diameter |
| 220 | (b) 150 mm diameter |
| 221 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete. |
| 222 | (b) 20 mm nominal bore |
| 223 | (c)32 mm nominal bore |
| 224 | (d)40 mm nominal bore |
| 225 | p/f G.I crossover(15 mm) |
| 226 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 227 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia.and size including Necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) |
| 228 | For fixed portion : Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 229 | For fixed portion : Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) |
| 230 | For fixed portion : Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 231 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 232 | Providing and fixing glazing in aluminum door, window, ventilator Shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in- Charge. (Cost of aluminum snap beading shall be paid in basic item.) |
| 233 | With floating glass panes of 3.5 to 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 234 | With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 235 | Providing and fixing A.C.P 3mm multi coloured (Fire retardent) ceiling, ventilator Shutters and partitions etc. with EPDM rubber / neoprene gasket, taping, waterproof silicon sealent or as required at site as per the directions of concerned Engineer-in-charge. |
| 236 | P/F of 19mm thick board of approved quality and manufacture (water proof ) in shelves , partitions, tables, access panel , shutters and other shutters etc. fixed with nails/ wood screws complete |
| 237 | Water proof |
| 238 | Commercial |
| 239 | P/F of 6 mm thick ( 3- Ply ) commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc. complete |
| 240 | P/F of 8 mm thick ( 3- Ply ) commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc.complete. |
| 241 | P/F of 10 mm thick ( 3- Ply ) commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc.complete. |
| 242 | P/F of 12 mm thick ( 3- Ply ) commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc. complete. |
| 243 | P/F of lamination of 0.8 mm thick of approved quality and manufacture and of required shade and color fixed with standard quality of adhesive in all types of works (fitted and finished area to be measures and paid 0 including cost of adhesive etc. complete in all respects. |
| 244 | (a)0.8 mm thick plain |
| 245 | (b)1 mm thick plain |
| 246 | (c) 1 mm thick textured. |
| 247 | (d) 0.80 mm thick textured. |
| 248 | p/f of 20*12mm ornamental kail wood beeding fixed with nails and wood screw complete. |
| 249 | p/f of PVC angle beeding (25*25)as per the directions of EIC complete. |
| 250 | p/f of PVC beeding (20mm)as per the directions of EIC complete. |
| 251 | P/F of Flat pressed 3-layer pre-laminated Board (Lamination on both sides) of approved quality including cost of screws/adhesive complete. |
| 252 | a. 12mm thick |
| 253 | b. 18mm thick |
| 254 | P/F of hardware fittings of approved quality ISI make including fixing with necessary screws, nuts, bolts etc complete, ( approved ones ) . |
| 255 | a. Link rod Lock 11” long |
| 256 | b. Link rod Lock 8” long |
| 257 | Plastic beading 25 mm ( approved one ) |
| 258 | P/F heavy duty ball cock with 300 mm brass rod and ball complete incl. removing damaged one where ever required. |
| 259 | a. 15mm |
| 260 | b. 20mm |
| 261 | c. 25mm |
| 262 | P/F of PVC heavy duty ball cock to fit into all kinds of flush tanks (compact one) of standard make (approved one)15mm dia |
| 263 | P/F C.I pipes and fittings:of approved quality. |
| 264 | (A) Pipes |
| 265 | (a)150 mm |
| 266 | (b)100 mm |
| 267 | (d)50mm |
| 268 | (B) Plain Bend |
| 269 | (a)150mm |
| 270 | (b)100mm |
| 271 | ©75mm |
| 272 | (c) Door Bend |
| 273 | (a)150mm |
| 274 | (b)100mm |
| 275 | ©75mm |
| 276 | (D)Reducer |
| 277 | (a)150*100mm |
| 278 | (b)100*75mm |
| 279 | ©75*50mm |
| 280 | (E) Cowl |
| 281 | (a)100mm |
| 282 | (a)75mm |
| 283 | (b)50mm |
| 284 | (F) Coller |
| 285 | (a)150mm |
| 286 | (b)100 mm |
| 287 | ©75 mm |
| 288 | P/F lead coulked joints for C.I pipes |
| 289 | P/F P-Trap/Floor trap 100 mm |
| 290 | P/F P-Trap/Floor trap 150 mm |
| 291 | P/F Plain Tee 100 mm |
| 292 | P/F Plain Tee 150 mm |
| 293 | P/F of PVC pipes/ fittings of approved make and quality (prince or finolex) ISI quality of following diameter: |
| 294 | (A)Pipes |
| 295 | a.32 mm |
| 296 | b.40 mm |
| 297 | c.50 mm |
| 298 | d.75 mm |
| 299 | e.100 mm |
| 300 | f.150 mm |
| 301 | (B)Door Bend |
| 302 | (a)150 mm |
| 303 | (b)100mm |
| 304 | (c)75 mm |
| 305 | (d)50 mm |
| 306 | (C)plain Bend |
| 307 | (a)150 mm |
| 308 | (b)100mm |
| 309 | ©75 mm |
| 310 | (d)50 mm |
| 311 | (D)Collar |
| 312 | (a)150 mm |
| 313 | (b)100mm |
| 314 | ©75 mm |
| 315 | (E)plain-Tee |
| 316 | (a)50 mm |
| 317 | (b)75 mm |
| 318 | (c) 100 mm |
| 319 | (d)150 mm |
| 320 | P-Trap(100 mm) |
| 321 | Floor-Trap(100 mm dia) |
| 322 | Waste pipe 32mm |
| 323 | 45 Degree Bend(100 mm) |
| 324 | Reducer(75-100 mm) |
| 325 | Door Tee(75 mm) |
| 326 | Door Tee(100 mm) |
| 327 | PVC Cowel |
| 328 | Elbow |
| 329 | 50 mm |
| 330 | 75 mm |
| 331 | 100 mm |
| 332 | 150 mm |
| 333 | P/F of M.S Push cocks 15mm complete (approved one) |
| 334 | P/F of C.I manhole covers with frame (heavy duty) approved ones of required shape and size |
| 335 | a.600x600mm/600mm dia |
| 336 | b.450x450mm/450mm dia |
| 337 | c.300x300mm/225mm dia |
| 338 | P/F of G.I assorted fittings of nominal bore of ISI make heavy quality including dismantling including removing of old one wherever required (approved one) |
| 339 | A. 15mm nominal bore |
| 340 | a. Socket |
| 341 | b. Elbow |
| 342 | c. Tee |
| 343 | d. Plug |
| 344 | e. Nipple 75 mm long |
| 345 | f. Niple 100 mm long |
| 346 | g. Tankey Nipple |
| 347 | B. 20 mm Nominal Bore |
| 348 | a. Socket |
| 349 | b. Elbow |
| 350 | c. Tee |
| 351 | d. Plug |
| 352 | e. Nipple 75 mm long |
| 353 | f. Niple 100 Mm long |
| 354 | g. Tankey Nipple |
| 355 | C. 25 mm Nominal Bore |
| 356 | a. Socket |
| 357 | b. Elbow |
| 358 | c. Tee |
| 359 | d. Plug |
| 360 | e. Nipple 75 mm long |
| 361 | f. Niple 100 Mm long |
| 362 | g. Tankey Nipple |
| 363 | D 32 mm Nominal Bore |
| 364 | Elbow |
| 365 | Tankey Nipple |
| 366 | Insulation of exposed water supply pipes (including fittings) on walls and roof tops upto water storage tanks BWO 50 mm glass wool with chicken mesh woomed with 16-18 guage wire and finished with 6-8 mm 1:10 coat of POP/ cement finished and glove/ deru incl removal of damaged insulation and scaffolding and clearance of site after completion of job |
| 367 | a. 15 mm dia |
| 368 | b. 20 mm dia |
| 369 | c. 25 mm dia |
| 370 | d. 32 mm dia |
| 371 | e. 40 mm dia |
| 372 | f. 50 mm dia |
| 373 | P/F of Cornice/door profile for MDF wall panelling of required size |
| 374 | P/F of MDF imported Wooden Laminated Flooring of Approved pattern and Brand/Make in desired color incl. cost of 5mm foam and beading etc. complete as per directions of EIC. |
| 375 | P/F of MDF wall panelling imported of Approved pattern and Brand/ Make in desired colour incl. frame work all complete as per directions of EIC.. |
| 376 | Providing and fixing of imported wooden panelling (12mm thick) lining on walls, ceilings tongued and grooved planks including cost of ground work ofjambs/runners of kd or budloo 2\\"x1.5\\" @600mm c/c horizontally and vertically in level and plums 12mm thick ply 50mm wide 600mm*600mm center to center harizontally and vertically fixing with rawl plugs and screws and cover mouldings but including cost of nails, screws and scafolding etc. including cost of two coats of touch wood and 50mm wide wooden cornice etc. complete all complete |
| 377 | Providing and fixing of superior quality wall paper of approved brand, manufacture colour and design with necessary adhesive Gum powder fully chemicalised or favicol whichever is suitable including preppration of wall surface by way of sand papering applying of POP / wall putty and other necessary repair, all complete at all heights as per specifications, drawings and as directed by Engineer-in-charge etc. wall paper of superior quality (sample to be approved by engineer-in charge). |
| 378 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. |
| 379 | Chaar Gul |
| 380 | Paanch Murabah |
| 381 | Supply of Labour/ for Snow /drain /road clearance |
| 382 | Supply of Helper (2nd class welder/Aluminum fitter) |
| 383 | Engagement of JCB/Loader on hire basis |
| 384 | Engagement of Tipper on hire basis |
| 385 | Engagement of Hand cart on hire basis |
| 386 | P/F of 2 mm thick poly carbonate sheets including cost of screws/ washers complete. |
| 387 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete |
| 388 | 150 mm dia |
| 389 | 200 mm dia |
| 390 | 250 mm dia |
| 391 | 300 mm dia |
| 392 | 450 mm dia |
| 393 | 600 mm dia |
| 394 | Pumping out of water caused by springs, river seepage, broken water mains or drains and the like. |
| 395 | P/F of vertical blind curtains with locking arrangement of approved pattern and quality |
| 396 | P/F of Roller blind curtains with locking arrangement of approved pattern and quality |
| 397 | P/F of Zebra blind curtains with locking arrangement of approved pattern and quality |
| 398 | P/F of steel Rod including brackets |
| 399 | Providing welded machine with welded Rod. |
| 400 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite Work) |
| 401 | P/F frosting privacy film for glass windows/ doors/ partitions. |
| 402 | P/F M.S Grill of required pattern in frames of window etc. with M.S flat,square or round bars etc. including primary coat with approved steel primer all complete(fixed by welding/Rawl plugs ,screws etc. |
| 403 | P/F of lead sheets for doors partitions tables etc.for protection against radioactive rays ,including all charges etc.complete job. |
| 404 | P/F Imported wooden D-type beading (20-25 mm) |
| 405 | Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 gram/m2) |
| 406 | Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.(2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\"or 3\\" or 6\\") as specified. |
| 407 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 408 | French spirit polishing, one or more coats on old work |
| 409 | Supply & Installation 2-3 mm thick self levelling Compound Containing high Quality synthetic resins special cement with selected fillers when mixed with water, Primer should be applied on sub floor to seal the pores etc as per direction of Engineer in Charge Complete |
| 410 | P/F C.P fittings (Approved Quality by Engineer Incharge) |
| 411 | CP long bend |
| 412 | Basin Mixer(centre hole)(including cp cups) |
| 413 | Supplying of PVC pipes/ fittings of approved make and quality (prince or finolex) |
| 414 | Waste pipe(40mm) |
| 415 | Supplying of Door Fittings |
| 416 | rod lock |
| 417 | Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
| 418 | Cleaning of Malba bwo mechanical/manual means outside the premises of Division. |
| 419 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. |
| 420 | P/F of electric fan of make (Havells / Anchor) including all necessary fittings accessories etc complete (wall Mount type). |
| 421 | Supply installation testing and comm. Of 12\\" sweep exhaust fan shutter type of havell/bajaj/crompton/equivalent make as directed by EIC |
| 422 | Providing and fittings in position Lighting points in3/20(1.5MMSQ), PVC insulated copper wire including switch of approved brand in cancelled PVC 3/4\\"dia conduits/channels complete in all respects. |
| 423 | Providing and Fixing in position 15 Ampere socketed Heating point in7/20 PVC insulated copper wire(4mmsq) in cancelled PVC 3/4 dia conduits including switch socket baord of approved brand complete in all respects. |
| 424 | Providing and Fixing in position 5 Ampere socketed Heating point in7/20 PVC insulated copper wire(2.5mmsq) in cancelled PVC 3/4 dia conduits including switch socket baord of approved brand complete in all respects.complete in all respects. |
| 425 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge |
| 426 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 427 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With 2nd class teak wood beading 62x19 mm |
| 428 | P/F Mortice Locks for Doors Link / Godrej/ ramson |
| 429 | P/F DOOR Closure Pump Type of approved make |
| 430 | P/F DOOR Closure Hydralic Type of approved make |
| 431 | P/F Almirah Locks with Screws Complete of approved make and quality |
| 432 | Magnetic catchers |
| 433 | Sliding Door bolt 300mm long (Al-drop) Stainless steel with lock and key Link/Ramson. |
| 434 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead :Thickness above 10 mm upto 25 mm |
| 435 | Supply of various bath room items |
| 436 | Toilet Harpic(500ml) |
| 437 | Tile Cleaning Harpic(500ml) |
| 438 | Tile Cleaning Acid (1000ml) |
| 439 | Hand wash(200ml) |
| 440 | Bath Soap |
| 441 | Supply of Towels (big Size) |
| 442 | Supply of hand Towels |
| 443 | Floor Wiper 300mm wide blade (Scotch brite) |
| 444 | Bucket Mop Wiper of approved brand |
| 445 | Bath Bucket plastic approved brand |
| 446 | Bath Mugs plastic approved brand |
| 447 | Bath Room Sleeper |
| 448 | Air Purifier |
| 449 | Toilet Brush |
| 450 | Toilet paper |
| 451 | Leather polish for chairs |
| 452 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and de chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm |
| 453 | Cleaning of walls and floor tiles with required chemicals. |
| 454 | Providing ceiling light 9-20 watts of approved brand. |
| 455 | Providing and fixing 32-40 Amp. Single pole MCB. |
| 456 | Providing and fixing 32-63 Amp. double pole MCB. |
| 457 | Providing and fixing Gang Box for MCB of required size. |
| 458 | Providing and fixing of MS steel curtain rods having wall thickness of 1.25 mm with two chromium plated steel brackets fixed with C.P brass screws and PVC sleeves etc. wherever necessary complete 25 mm dia. |
| 459 | Dismantling of existing damaged wardrobs incl. stacking of serviceable material and disposal of unserviceable material out side the muncipal limits as directed. |
| 460 | P/F of 19mm thick MR grade ply wood / ply board incl. cost of nails, frame work etc. complete as per directions of EIC at site complete. |
| 461 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 462 | First Class kail wood |
| 463 | Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type |
| 464 | Electric work |
| 465 | Wiring for power plug points with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in existing surface / recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for earthing as required of Polycab /Finolex /Anchor / RR Kabels / Salzer make / eq. make as approved by department not below the rank of SDO. |
| 466 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface I recessed medium class PVC conduit as required. of Polycab / Finolex /Anchor / RR Kabel /Salzer make /eq. make as approved by department not below the rank of SDO. |
| 467 | 2 X 1.5 sq. mm +1 X1.5 sq. mm earth wire |
| 468 | 2X2.5 sq. mm +1 X 2.5 sq. mm earth wire |
| 469 | 2 X4 sq. mm + 1 X4 sq. mm earth wire |
| 470 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 471 | 2 X 10 sq. mm +1 X 6 sq. mm earth wire |
| 472 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 473 | Supply, Installation testing and commissioning of 250 mm sweep Exhaust Fans of Usha / Crompton Greaves / Havel's incl making of necessary connections and making of necessary space in walls / Windows as per site. The Job includes providing and fixing of shutter of suitable size backlite hylum sheet for fixing of exhaust fan of Usha /Crompton /Helonix /orient make or eq. make as approved by department not below the rank of SDO |
| 474 | Earth work excuation of hard /soft soil upto 2ft in depth and 1 ft in width by manual mechanical means with refilling of execuated Soil after cable including disposal of surplus soil. |
| 475 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 476 | Fabrication of wardrobe / almirahs/ kitchen cabnits deep made up of 19 mm thick blockboards frames, shutters shelves & 12 mm thick back incl.1mm thick dulmica lining on both exposed as well as inner surface with 19 mm thick shutters of block board with teak coat on exposed surface incl. providing supports brackets etc at regular intervals(2’-0”) and fixing of necessary hardware fittings viz locks handles catchers bolts etc complete. |
| 477 | 600 mm |
| 478 | 450 mm |
| 479 | NB:- Any item(s) of work found necessary during the execution of the work, though not included in the BOQ, shall be executed with prior approval and shall be paid at par with the percentage rate quoted by the bidder,as per SSR 2022 or LMR as applicable. Please Enable Macros to View BoQ information |