|
| 1 | Civil work. |
| 2 | Providing and Fixing Brass sanitary fittings of approved quality as approved by incharge engineer |
| 3 | Ball valve 15mm dia nominal bore |
| 4 | Ball valve 20mm dia nominal bore |
| 5 | Ball valve 25mm dia nominal bore |
| 6 | Gate Valve 32 mm dia. Nominal bore |
| 7 | Gate Valve 40 mm dia. Nominal bore |
| 8 | Ball Cock 15mm dia nominal bore |
| 9 | Tanky Nipple 15 mm dia. Nominal bore |
| 10 | Tanky Nipple 20 mm dia. Nominal bore |
| 11 | Tanky Nipple 25 mm dia. Nominal bore |
| 12 | Providing andfixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801 of standard quality as approved by incharge engineer UV Stabilized and anti microbial fusion welded, having thermal stabilily for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.Internal Work - Exposed on wall with clamps at 1.00 meter spacing |
| 13 | PN-16 Pipe, 25 mm OD(SDR-7.4) Work - Concealed work including cutting chases and making good the wall etc. |
| 14 | PN-16 Pipe, 32 mm OD(SDR-7.4) Work -Exposed on wall with clamps at 1.00 meter spacing |
| 15 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 16 | PN-16 Pipe, 32 mm OD(SDR-7.4) |
| 17 | Providing and fixing PPR Unions of standard quality. |
| 18 | Plain Union 20 mm dia. Nominal bore |
| 19 | Plain Union 25 mm dia. Nominal bore |
| 20 | Plain Union 32 mm dia. Nominal bore |
| 21 | Plain Union 40 mm dia. Nominal bore |
| 22 | End Plug 20 mm dia. Nominal bore |
| 23 | End Plug 25 mm dia. Nominal bore |
| 24 | End Plug 32 mm dia. Nominal bore |
| 25 | Ball Valve 20 mm dia. Nominal bore |
| 26 | Ball Valve 25 mm dia. Nominal bore |
| 27 | Ball Valve 32 mm dia. Nominal bore |
| 28 | Ball Valve 40 mm dia. Nominal bore |
| 29 | Providing and Fixing of PVC Pipe (Type \\"B\\") of approved quality ( Prince/Finolex, Jinadal/Astral Make or equivalent as approved by incharge engineer ) in proper gradient in excavated trenches including jointing and refilling the excavated material and refurbishing complete including charges of excavation. |
| 30 | 150mm dia |
| 31 | 110mm dia |
| 32 | 75mm dia |
| 33 | 50mm dia |
| 34 | Providing and Fixing PVC fittings (Type ''B'') of approved quality |
| 35 | Plain Bend 75 mm dia |
| 36 | Plain Bend 100 mm dia |
| 37 | Door Bend 75 mm dia |
| 38 | Door Bend 100 mm dia |
| 39 | Plain Tee 75 mm dia |
| 40 | Plain Tee 100 mm dia |
| 41 | Plain Equal Junction 75 mm dia |
| 42 | Plain Equal Junction 100 mm dia |
| 43 | Door Tee 75 mm dia |
| 44 | Door Tee 100 mm dia |
| 45 | Collar 75 mm dia |
| 46 | Collar 100 mm dia |
| 47 | Floor Trap 75 mm dia |
| 48 | Floor Trap 100 mm dia |
| 49 | P/S Trap 100 mm dia |
| 50 | off set 75 mm dia |
| 51 | off set 100 mm dia |
| 52 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 53 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 54 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm of approved make like (Parry Ware/Hindware/Cera or Equivalent, |
| 55 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan. of approved make like (Parry Ware/Hindware/Cera or Equivalent as per the directions of EIC at site complete |
| 56 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: |
| 57 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern and make as approved by incharge engineer, including painting of fittings and brackets, cutting and making good the walls wherever required : size 540x400mm |
| 58 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 59 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete of standard quality as approved by incharge engineer |
| 60 | Semi rigid pipe 32 mm dia |
| 61 | Semi rigid pipe40 mm dia |
| 62 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete: 10 liter capacity. |
| 63 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 as approved by incharge engineer with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required of standard quality as approved by incharge engineer.Kitchen sink with drain board 510x1040mm bowl depth 250mm |
| 64 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 65 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 CM length or 20MM Nominal bore |
| 66 | Supplying and fixing C.I. cover without frame for manholes:455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. |
| 67 | 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. |
| 68 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately).Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 |
| 69 | Construction of brick masonry man hole on a base of cement concrete 1:2:4 with palastering the inner sirfaces in 1:4 cement mortar with a coat of floating cement concrete with MS Manhole cover and frame allcomplete as per the directions of incharge engineer at site |
| 70 | 1'-6'' x1'6''x1'-6'' |
| 71 | P/F C.p sanitary fittings of approved quality. |
| 72 | Bib Cock |
| 73 | Bib Cock (Two Way) |
| 74 | Brass Bib Cock Plain |
| 75 | Pillar Cock |
| 76 | Angle Valve |
| 77 | Angle Valve (2 in 1) |
| 78 | Wash Basin mixer Single hole |
| 79 | Wash Basin mixer Double hole |
| 80 | Wall mixer(Non Telescopic) |
| 81 | Wall mixer (Telescopic) |
| 82 | Wall mixer (3 in 1) |
| 83 | Sink mixer |
| 84 | Towel Ring 20 mm dia |
| 85 | Towel Rail single 600 mm long |
| 86 | Towel Rack 600 mm |
| 87 | Health Faucet with required Chain Tube |
| 88 | C.P Cup |
| 89 | Grating 100 mm dia |
| 90 | Grating 75 mm dia |
| 91 | Grating 100 mm Square |
| 92 | Grating 75 mm Square |
| 93 | Paper Holder |
| 94 | Tumbler Holder |
| 95 | Soap Case |
| 96 | Hand shower with Chain |
| 97 | Over Head Shower arm 305 mm |
| 98 | spindle / disc |
| 99 | Jet Pin for W.C |
| 100 | Jet Pin for W.C with Chain Tube |
| 101 | Leg Pair |
| 102 | Nipples 25 mm to 50 mm 15mm dia |
| 103 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: wherever required as per the directions of Engineer Incharge at site complete. |
| 104 | 15 mm dia. Nominal bore |
| 105 | 20 mm dia. Nominal bore |
| 106 | 25 mm dia. Nominal bore |
| 107 | 32 mm dia. Nominal bore |
| 108 | 40 mm dia. Nominal bore |
| 109 | 50 mm dia. Nominal bore |
| 110 | Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc.complete (new work) |
| 111 | 15 mm dia. Nominal bore |
| 112 | 20 mm dia. Nominal bore |
| 113 | 25 mm dia. Nominal bore |
| 114 | 32 mm dia. Nominal bore |
| 115 | 40 mm dia. Nominal bore |
| 116 | 50 mm dia. Nominal bore |
| 117 | Nipple 15 mm dia. Nominal bore 50 mm Long |
| 118 | Cross Over 15 mm dia. Nominal bore |
| 119 | Cross Over 20 mm dia. Nominal bore |
| 120 | Engagement of labours for doing necessary works |
| 121 | Plumber |
| 122 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc.upto required depthh and size, including dressing of sides and ramming of bottoms, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soil |
| 123 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 124 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m All kinds of soil : |
| 125 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 126 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 127 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. |
| 128 | P/L stone soling (Hand packed) in trenches incl. ramming, dressing ,watering etc. incl. all leads, lifts and carriage upto site of work complete. |
| 129 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutttering. All work upto plinth level 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size (crushed) incl. cost and carriage of all materials involved complete. |
| 130 | P/L in position specified grade of cement concrete excld. the cost of centering, and shuttering, -All work at all levels in 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone agg. 20mm nominal size).incl. cost and carriage of all materials involved complete. |
| 131 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutttering. All work upto plinth level1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size (crushed) incl. cost and carriage of all materials involved complete. |
| 132 | P/ L of reinforced cement concrete in 1:2:4 (1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 133 | P/L in position specified grade of reinforced cement concrete excld. the cost of centering, shuttering, finishing and reinforcement -All work at all levels 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone agg. 20mm nominal size).incl. cost and carriage of all materials involved complete. |
| 134 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. cost and carriage of all materials involved complete. |
| 135 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. |
| 136 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 137 | Centering & shuttering including strutting, propping etc including removal of form work for |
| 138 | Foundations: footings, bases of columns etc. for mass concrete. |
| 139 | Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc |
| 140 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 141 | Suspended floors, roofs, landings, balconies and access platforms |
| 142 | Columns, pillars, piers, abutments, posts and struts. |
| 143 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete (as coping) |
| 144 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. incl. cost and carriage of all materials involved complete. |
| 145 | Supply and filling of RBM of specified size as approved incl. dressing, watering, ramming Quarry incl. carriage of same from approved source upto site of work. |
| 146 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 147 | Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab upto 0.5 sqm) 16mm thick |
| 148 | Granite 18 mm thick of any colour or shade (Area of slab upto 0.5 sqm) |
| 149 | Granite 18 mm thick of any colour or shade (Area of slab above 0.5 sqm) |
| 150 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete asper design approved by Engineer-in- Charge |
| 151 | Marble work |
| 152 | Granite work |
| 153 | Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. |
| 154 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ist class imported KD wood |
| 155 | Providing and fixing of superior quality wall paper of approved brand, manufacture, color and design with necessary adhesive Gum powder fully chemicalised or favicol whichever is suitable including prepration of wall surface by way of sand papering, applying of POP/wall putty and other necessary repair , all complete at all heights as per specifications, drawings and as directed by Engineer In-charge etc. |
| 156 | Providing and fixing 35 mm thick pannelled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick decorative Nova pan Particle board both sides laminated as per the approved design complete with required beading/moldings. ( 35mm thick ist class imported KD Wood) |
| 157 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in- charge Imported KD Woodl wood 35 mm thick |
| 158 | Providing and fixing glazed shutters for doors, windows and clerestory windows s of using 4mm thick float glass panes including ISI marked M.S. pressed butt shutters hinges bright finished of required size with necessary screws.35 mm thick ist class imported KD Wood |
| 159 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm thick Imported KD woodl wood |
| 160 | Float glass panes 3.5 mm thick glass pane (weighing not less than 10 kg/sqm) Including beading complete job |
| 161 | 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm) |
| 162 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading |
| 163 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: |
| 164 | Budloo/ Fir wood 50x12mm |
| 165 | Budloo/ Fir wood 50 x 20 mm |
| 166 | Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12mm beading complete with : |
| 167 | First class kail wood. |
| 168 | Fabrication of wardrobe / almirahs/ kitchen cabnits deep made up of 19 mm thick blockboards frames, shutters shelves & 12 mm thick back incl.1mm thick dulmica lining on both exposed as well as inner surface with 19 mm thick shutters of block board with teak coat on exposed surface incl. providing supports brackets etc at regular intervals(2’-0”) and fixing of necessary hardware fittings viz locks handles catchers bolts etc complete. |
| 169 | 600 mm |
| 170 | 450 mm |
| 171 | 300 mm |
| 172 | Structural steel welded work in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 173 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete |
| 174 | 25 mm thick with 12.5 mm nominal size stone aggregate. |
| 175 | 40 mm thick with 20 mm nominal size stone aggregate. |
| 176 | 50 mm thick with 20mm nominal size stone aggregate. |
| 177 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . |
| 178 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 179 | Size of tile 500x500 mm |
| 180 | Size of tile 600x600 mm |
| 181 | Size of tile 800x800 mm |
| 182 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 183 | Providing and laying Ceramic Anti-skid glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 184 | Providing and fixing of plywood( BWR) in walls , ceiling or like of approved brand and manfacture with all necessary fittings and fixtures, scaflolding all complete as per the directions of incharge eengineer at site |
| 185 | 6 mm thick |
| 186 | 10 mm thick |
| 187 | 12 mm thick |
| 188 | 19 mm thick |
| 189 | Providing and fixing of denmica / sunmica over old almirah including all complete as per the directions of incharge engineer at site |
| 190 | Providing and fixing of imported wooden panelling(12mm thick) lining on walls, ceilings tongued and grooved planks including cost of ground work ofjambs/runners of kd or budloo 2\\"x1.5\\" @600mm c/c horizontally and vertically in level and plums 12mm thick ply 50mm wide 600mm*600mm center to center harizontally and vertically fixing with rawl plugs and screws and cover mouldings but including cost of nails, screws and scafolding etc. including cost of two coats of touch wood and 50mm wide wooden cornice etc. complete all complete |
| 191 | Providing and fixing of cornice 50 mm wide of imported KD wood with all necessary fittings and fixtures all complete |
| 192 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 193 | 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 194 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. |
| 195 | 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 196 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. |
| 197 | 1.25 mm thick with zinc coating not less than 350 gram/m2 |
| 198 | Providing and fixing 15cm wide 45 cm overall semi circular plain gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. |
| 199 | 0.80 mm thick with zinc coating not less than 275 gram/m2 |
| 200 | Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2mm thick flat |
| 201 | Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. |
| 202 | Providing and fixing of 0.5mm thick colour coated iron profile sheets of roofing accessories in ridges, valleys etc. (500 to 600mm wide) of approved profile and colour as approved by Engineer-in-Charge with self drilling /self tapping screws of size (5.5x55mm) with EPDM seal of same colour matching the shade of the ridges/ valleys including carriage of same upto site of work complete. |
| 203 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 204 | Providing and fixing of 25mm thick T&G wooden planks of budloo / imported KD Wood including scafolding , all fixtures and all carriages complete |
| 205 | 15mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand) (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 206 | 20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) incl. cost and carriage of all materials involved complete. |
| 207 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 208 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Raised and cut pointing |
| 209 | White washing with lime to give an even shade on New Work (three or more coats) |
| 210 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade |
| 211 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 212 | Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications |
| 213 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 214 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @3.84 kg/10sqm) |
| 215 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 216 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 217 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 218 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 219 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 220 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 221 | Applying priming coat:With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 222 | Applying priming coat:With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat) |
| 223 | Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:Two coats |
| 224 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete |
| 225 | On steel work |
| 226 | On concrete work |
| 227 | Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 228 | Applying a coat of mordant solution on G.S. sheets: with a solution of 38gms of copper acetate in liter of soft water |
| 229 | Applying a coat of mordant solution on G.S. sheets:With a solution made of 13gms of hydrochloric acid in a solution of 13gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a liter of soft water. |
| 230 | Painting with oil type wood preservative of approved brand and manufacture on New work (two or more coats) |
| 231 | Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5sqm per liter per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant |
| 232 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 233 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade on new work Two or more coats. |
| 234 | Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade on new work Two or more coats. |
| 235 | Varnishing with varnish of approved brand and manufacture: |
| 236 | Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 237 | Two or more coats of glue sizing with spar varnish on an under coat of flatting varnish |
| 238 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 239 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work |
| 240 | Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture |
| 241 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smoothcomplete. 2 mm thick |
| 242 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 243 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 244 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. |
| 245 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter |
| 246 | With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter |
| 247 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter |
| 248 | 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In- Charge. |
| 249 | White washing with lime to give an even shade : Old work (two or more coats) |
| 250 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 251 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. |
| 252 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs toscratches etc. complete. |
| 253 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats |
| 254 | Painting with oil type wood preservative of approved brand and manufacture on old work (one or more coats) |
| 255 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 256 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.including preparing of surface by cleaning and sand papering. Complete |
| 257 | Painting with aluminum paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 258 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade, one or more coats on old work |
| 259 | French spirit polishing, one or more coats on old work |
| 260 | Polishing on wood work with readymade wax polish of approved brand and manufacture on old work. |
| 261 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 262 | Finishing walls with water proofing cement paint of requiredshade |
| 263 | Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete |
| 264 | Old work (one or morecoats applied @2.20kg/10sqm complet |
| 265 | Finishing walls with textured exterior paint of required shade: |
| 266 | Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm) |
| 267 | Old work (one or more coats) applied @1.82 ltr/10sqm |
| 268 | Finishing walls with Acrylic smooth exterior paint of requiredshade: |
| 269 | Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 270 | Old work (one or more coats applied @ 0.90 liters/ 10sqm) |
| 271 | Painting with Ready mixed touch wood on wooden surfaces of approved brand and manufacture on old work (one or more coats) including preparing of surface by cleaning and sand papering. |
| 272 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : |
| 273 | 12 mm dia. |
| 274 | 20 mm dia. |
| 275 | 25 mm dia. |
| 276 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets |
| 277 | 20mm dia |
| 278 | 25 mm dia |
| 279 | Providing and fixing Aluminium hardware fittings of approved make |
| 280 | Tower bolt 100mm |
| 281 | Tower bolt 150mm |
| 282 | Eye Hook |
| 283 | Handle100mm |
| 284 | Handle150mm |
| 285 | Ward robe lock concealed Godrej/Link/Ramson. |
| 286 | Hinges 75mm |
| 287 | P/F Mortice Locks for Doors Link / Godrej/ ramson |
| 288 | P/F DOOR Closure Capsule Type of approved make |
| 289 | P/F DOOR Closure Pump Type of approved make |
| 290 | P/F DOOR Closure Hydralic Type of approved make |
| 291 | P/F Almirah Locks with Screws Complete of approved makeand quality |
| 292 | Magnetic catchers |
| 293 | Sliding Door bolt 300mm long (Al-drop) Stainless steel with lock and key Link/Ramson. |
| 294 | Engagement of Masons, Carpentars and helpers along with equipment for various masonary and carpentary works. |
| 295 | Carpenter |
| 296 | Mason |
| 297 | labour/ helper |
| 298 | Cleaning of various curtains,beddings.towel etc. by way of chemical wasshing from time to time . |
| 299 | curtains |
| 300 | Razaie |
| 301 | pillow cover |
| 302 | towels |
| 303 | Razaie cover |
| 304 | Bed cover |
| 305 | three seat sofa cover |
| 306 | single seat sofa cover |
| 307 | Uprooting rank vegetation and weeds by digging the area to a depth of60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water,uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts |
| 308 | Supplying and stacking of good earth at site including royality ( earth measured in stacks will be reduced by 20% for payment including all carriages loading and un-loading etc. complete. |
| 309 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) with grass turf |
| 310 | Supply of various bath room items |
| 311 | Toilet Harpic(500ml) |
| 312 | Tile Cleaning Harpic(500ml) |
| 313 | Tile Cleaning Acid (1000ml) |
| 314 | Hand wash(200ml) |
| 315 | Bath Soap |
| 316 | Supply of Towels (big Size) |
| 317 | Supply of hand Towels |
| 318 | floor wiper 300mm wide blade (scotch brite) |
| 319 | Bucket mop wiper of approved brand |
| 320 | Bath Mugs plastic approved brand |
| 321 | Bath Room Sleeper |
| 322 | Air Purifier |
| 323 | Toilet Brush |
| 324 | Toilet paper |
| 325 | Leather polish for chairs |
| 326 | Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 327 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 328 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm |
| 329 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace includingshifting at ground level as per direction of Engineer-in- charge. |
| 330 | Repair of existing Acs incl. reilling of gas complete job |
| 331 | cleaning of walls and floor tiles with required chemicals. |
| 332 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 333 | First Class kail wood |
| 334 | Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type |
| 335 | Electric work |
| 336 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Polycab /Finolax / RR Kabels /Anchor/ salzer / make / eq. make as approved by department not below the rank of SDO in existing surface / recessed medium class PVC conduit, with 6Amps modular switch, modular plate of Anti backteria series of ABB L&T /Legrand /eq. make as approved by department not below the rank of SDO, fitted on suitable GI box and earthing the point with 1.5 s q.mm FRLS PVC insulated copper conductor single core cable etc. as required. (P+N+E) for Normal and invertor points per room is to be provided seperately ) |
| 337 | Wiring for power plug points with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in existing surface / recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for earthing as required. of Polycab /Finolex /Anchor / RR Kabels / Salzer make / eq. make as approved by department not below the rank of SDO. |
| 338 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface I recessed medium class PVC conduit as required. of Polycab / Finolex /Anchor / RR Kabel /Salzer make /eq. make as approved by department not below the rank of SDO. |
| 339 | 2 X 1.5 sq. mm +1 X1.5 sq. mm earth wire |
| 340 | 2X2.5 sq. mm +1 X 2.5 sq. mm earth wire |
| 341 | 2 X4 sq. mm + 1 X4 sq. mm earth wire |
| 342 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 343 | 2 X 10 sq. mm +1 X 6 sq. mm earth wire |
| 344 | Supply and fixing of 6-10 Sq.mm Copper thimbles to be crimped rolling of colour coded tape |
| 345 | Supplying and fixing following size modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required of ABB /L&T /Legrand /eq. make as approved by department not below the rank of SDO |
| 346 | 2 Module (75mmX75mm) |
| 347 | 4 Module (125mmX75mm) |
| 348 | 6 Module (200mmX75mm) |
| 349 | 8 Module (125mmX125mm) |
| 350 | 12 Module (200mmX150mm) |
| 351 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required of Anti backteria series of ABB/L&T /Legrand /eq. make as approved by department not below the rank of SDO |
| 352 | 5/6 A switch |
| 353 | 15/16 A switch |
| 354 | 3 pin 5/6 A socket outlet |
| 355 | 6 pin 15/16 A socket outlet |
| 356 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required of Anti backteria series of ABB /L&T /Legrand /eq. |
| 357 | 2 Module (75mmX75mm) |
| 358 | 4 Module |
| 359 | 6 Module |
| 360 | 8 Module |
| 361 | 12 Module |
| 362 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (Anti backteria series of ABB /L&T /Legrand /make /eq. make as approved by department not below the rank of SDO) |
| 363 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 364 | supply and laying of 25 mm dia medium class PVC medium grade Conduit to berecessed on walls / floor complete with all allied accrues like bends, tees etc. for paving way of laving of wires of heating points /circults machine points /circuite and sub mains The job includes cutting of walls / floors with required hydraulic cutter and refacing of walls with cement plaster of required ratio or with P O.P after laying of conduits refacing to its original position by way of supply and applying of painting of required colour to effected area's complete matching with existing surface Anchor/Polycab/Finolex/TMT Plus /paralex make |
| 365 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, 3 nos. blades, 30 cm long down rod,suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. of Usha/Helonix / Orient /Crompton make or eq. make as approved by department not below the rank of SDO |
| 366 | Supply, Installation testing and commissioning of 250 mm sweep Exhaust Fans of Usha / Crompton Greaves / Havel's incl making of necessary connections and making of necessary space in walls / Windows as per site. The Job includes providing and fixing of shutter of suitable size backlite hylum sheet for fixing of exhaust fan of Usha /Crompton /Helonix /orient make or eq. make as approved by department not below the rank of SDO |
| 367 | Supply and fixing of 18 Watts LED surface mounted (Commercial type having aluminium Body and Housing ) downlighter having following specficafications .The luminaire should have a colour temperature of 6500°K, CRI≥80 and SDCM≤5. The downlighter shall be back lit & not side-lit. The driver shall have THD≤10% (@full Load) and PF ≥ 0.95 (@full load). Luminaire shall be designed to emit initial system lumen output of 2160 lumens with minimum system efficacy of 120 lumen/watt. The luminaire housing should made of pressure die-cast aluminium. The fixture should comply with the parameters as per IS10322. The luminaire shall have impact resistance of IK02 & ingress protection of IP20.Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The luminary shall have average life of 50000 hrs operating temperature -10 C to + 45 C The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals: LM79 issued by NABL accredited lab, LM8O issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab & BIS certificate for LED Luminaire & Driver. approved make Philips / Lighting techology / Trilux /wipro/ Endo / Igguzini /Regent make. The Agency / firm must submit the Techanical data sheet (TDS) on OEM Letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO, prior to the supply of materials |
| 368 | Supply Installation, Testing and Commissioning of 1P 66, 50 Watt LED Flood Luminaries having Aluminium body of standard make dully isi marked to be fitted on walls / poles with necessary cliffs /Clamps with nuts and bolts complete job. The system efficacy of the luminaire shall be ≥120Im/w. The LEDs used in the luminaire shall be from either Lumileds, Osram, Nichia, APT Electronics and CREE make, shall have CCT of 5700°K, CR270, SDCM≤5, Life of 50000Hrs @ L70B50. The luminaire shall have IP rating of IP66 & IK rating of IK07. The luminaire shall have lens made of polycarbonate & optical cover made of toughened glass. The LED driver shall have operating voltage range of 140V to 270V, PF≥0.95 @ full load,THDs 10% @ full load, In-built surge protection of 4KV, HV Cut off @ 325V (±15V). The luminaire shall have 10KV SPD in-built inside the luminaire.. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver.of Philips / Lighting techology / Trilux/wipro/ Endo / Igguzini /Regent make.The Agency / firm must submit the Techanical data sheet (TDS) on OEM Letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of material |
| 369 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) of legrand / ABB /Schneider /L&T /Simens make |
| 370 | 8 way (4+24), double door |
| 371 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 372 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with lections, testing and commissioning etc. as required of legrand / ABB /Schneider /L&T mens make |
| 373 | Supplying and fixing of 32 Amps rating DP 240/415 volts (10KA) of Legrend L&T /ABB /Simens /Schinder make dully isi marked complete with connections |
| 374 | Supplying and fixing of 40 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections |
| 375 | Supplying and fixing of 63 Amps rating DP 240/415 volts (10KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections |
| 376 | Supply, Laying, Testing & Commissioning of 50 sq.mm 2- core armored Al Cable XLPE/ PVC Insulated and Steel sheathed of Paramount /KEI/Havells / RR Kabels or any other brand as approved by department not below the rank of SDO, including cost thimbles on input aswell as output sides dully crimped with hydraulic crimping tool incl making of necessary connections, Including rolling of LT Colour coded types for main service line from LT pole |
| 377 | Supply and laying of HDPE double layer Corrigated pipe having 50/38 mm dia (OD/ ID) with allied accessories like collars ,bends etc complete job of standard make dully isi marked to be approved by department not below the rank of SDO |
| 378 | Earth work excuation of hard /soft soil upto 2ft in depth and 1 ft in width by manual mechanical means with refilling of execuated Soil after cable including disposal of surplus soil. |
| 379 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 380 | Providing and laying of shock proof Rubber mats of 2mt. x 1 mt. and 12 mm thick in size |
| 381 | NB:- Any item(s) of work found necessary during the execution of the work, though not included in the BOQ, shall be executed with prior approval and shall be paid at par with the percentage rate quoted by the bidder,as per SSR 2022 or LMR as applicable. Please Enable Macros to View BoQ information |