|
Tender for Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centering And Shuttering. All Work Upto Plinth Level With:1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , 12Mm Cement Plaster Of Mix:1 : 6 ( 1 Cement : 6 Coarse Sand) , Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 1 Mm Thick , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade On New Work (Two Or More Coats) Over And Including Priming Coat With Water Thinnable Cement Primer , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade On New Work (Two Or More Coats Applied @ 1.67 Liter/10Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg/10Sqm) , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Bib Cock Of Approved Quality Conforming To Is : 8931Cock Of Approved Quality Conforming To Is : 8931 , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete: Semi Rigid Pipe 40Mm , Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. Single Socketed Pipes 75 Mm Diametre , Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm (Thickness To Be Specified By The Manufacturers) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 11.50.1 In Colour Such As White, Ivory, Grey, Fume Red Brown , Providing And Fixing White Vitreous China Flat Back Or Wall Cock Of Approved Quality Conforming To Is : 8931Corner Type Lipped Front Urinal Basin Of 430X260x350 Mm And 340X410x265mm Sizes Respectively. , Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Zsections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixed With Dash Fastener Of Required Dia. And Size Including Necessary Filling Up Of Gaps At Junctions I.E, At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Felt Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Panelling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge (Glazing, Panelling And Dash Fasteners To Be Paid For Separately.)For Fixed Portion Anodized Aluminum (Anodized Transparent Or Dyed To Required Shade According To Is:1868, Minimum Anodic Coating Of Grade Ac 15) , Providing & Fixing Of Exhaust Fan Complete Job , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete • Stone Aggregate Below/Above 40Mm Nominal Size Crushed For An Average Distance Of 10 Kms..
|